Information that generally describes the service order If the service order status is Free, Planned, or Released, you can add new activity lines. New activities are created with the status Free. The information that is recorded about the activity is used to specify what type of work is performed. You can record information such as what the work is performed on, for example, item, anonymous item, or serial number, when the work is performed, what skills are required to perform the work, and any changes that will occur to the cluster based on the work performed. The information for the activity can be defaulted if linked to a reference activity. Type of service order - list of potential values has not yet been determined. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The code for the currency associated with an amount. The code for the currency associated with an amount. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The timestamp marking the beginning of a time period during which a related entity. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. The timestamp marking the ending of a time period during which a related entity. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Indicates the current state of the associated object. Holds the lines that make up the address. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. Holds the lines that make up the address. Qualifies the further division of the City, example a city may have many districts or Boroughs. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The sequence number of this address line. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The sequence number of an address. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. Vanity city name like La Jolla for San Diego The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. The code for the currency associated with an amount. Is the identifier of the given Line Component within the document Identifies the engineer assigned to the activity. Indicates the current state of the associated object. Indicates the Accepted date and time for the assignment of service. Indicates the Rejection date and time for the assignment of service. Indicates the Planned TimePeriod in which the service order is planned to be performed. Indicates the actual TimePeriod in which the service order is performed. A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The code for the currency associated with an amount. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Channel Code A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type associated with this group of classifications. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type associated with this group of classifications. This attribute contains the Code List ListID for the code that it is associated with. GenericStatus This attribute contains the Code List ID for the codes that are associated with corresponding entity. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Element for the communication of all codes. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the type of configured asset being used... Free form text that describes the object and repeats as needed to provide support for multilingual descriptions An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Contact. Identifies the means of communicating with this contact. Each instance can represent an address, email address, web site or phone number. Code that identifies the prefered language of the contact. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Contact. Identifies the means of communicating with this contact. Each instance can represent an address, email address, web site or phone number. Code that identifies the prefered language of the contact. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Contact. Identifies the means of communicating with this contact. Each instance can represent an address, email address, web site or phone number. Code that identifies the prefered language of the contact. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Is the primary document id for the document associated. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Indicates the current state of the associated object. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. The customer party's account id. Identifies the contact information for the requesting person, organization, department, or group on the associated document or line. Identifies the contact information of the person, organization, department, or group that planned for the timing of the exchange of goods/services that this document is associated at the document or line level. Identifies the contact information for the buying person, organization, department, or group on the associated document or line. Identifies the contact information of the person, organization, department, or group that is to receive the contents communicated by the document or line. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the CS Contact. Methods of establishsing communication with the CS Contact. The timestamp marking the beginning of a time period during which a related entity. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. The timestamp marking the ending of a time period during which a related entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The amount of discount allowed expressed in the transaction currency. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Identifies the financial ledger to be used when updating balances OED: A rate, number or proportion in each hundred. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The monetary value of the object in which the amount is associated An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Is the primary document id for the document associated. Is the identifier of the given Line Component within the document The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. The code for the currency associated with an amount. The code for the currency associated with an amount. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The timestamp marking the beginning of a time period during which a related entity. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. The timestamp marking the ending of a time period during which a related entity. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions This identifies the problem that is reported on an asset, equipment, facility or location This attribute contains the Code List ListID for the code that it is associated with. Address Format Codes An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. This is a grouping of the Hazard Id into different types Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Identifies the precautions to be taken to deal with the specific hazard When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. System, or not used The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. Valid values for the Item are Customer, Supplier, Manufacturer, SKU, and Duplicate. The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Identifier of the given location within the scope of the integration The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Identifies the Name of the Location From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions true when this location is a valid pick-up location for the web storefront. Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Identifies the Name of the Location Address for the given location Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Identifier of the given location within the scope of the integration The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Identifies the Name of the Location Directions for the given location Address for the given location From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Identifies the value recorded for the meter at a specific point of time Is the timestamp in which the measurement was recorded. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies where the note is used and is associated to an Infor defined code list, 'NoteType,' that indicates the processes that might use the note. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. The OperationID/ID references the Operation noun which we aren’t currently publishing. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the creditor. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the creditor. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the creditor. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. This attribute contains the Code List ListID for the code that it is associated with. Payment Basis Identifies the Terms i.e. the time and number of payments and the amount or percentage of the payment. Identifies the Discount the time and number of payments and the amount or percentage of the discount from the payment. Identifies the Peanlty what happen when the time and number of payments and the amount or percentage of the penalty to add to the payment. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. The datetime on which the object was last modified. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Identifies the Terms i.e. the time and number of payments and the amount or percentage of thepayment. Identifies the Discount the time and number of payments and the amount or percentage of the discount from the payment. Identifies the Peanlty what happen when the time and number of payments and the amount or percentage of the penalty to add to the payment. This indicates the dates at which payments are made by one party to another. Identifies the types associated with the PaymentTerm. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The penalty amount in the transaction currency. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. The timestamp marking the beginning of a time period during which a related entity. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. The timestamp marking the ending of a time period during which a related entity. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ID for the codes that are associated with corresponding entity. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. The numeric ranking of this element in a collection of like elements where 1 is the preferred option. Indicates that this element is the prefered element in a collection of like elements. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Indicates the current state of the associated object. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ListID for the code that it is associated with. Priorities An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. This is a classification or grouping of the failure id into different categories Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Idenfities a sign or indication of something that is associated with a problem. This identifies a possible cause of a particular problem. This identifies a Remedy for a specific problem An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The date that document was created within the system of record. Identifies the resource codes associated with the Project. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Maintains the locations or sites (offices, warehouses, plants) within the enterprise. An explicit period of time for the bucket. The ID that is associated with an acitivity for the Project. Identifies the Type of project that is being referenced. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Indicates the time period in which the associated component is effective. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that are associated with corresponding entity. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. The code for the currency associated with an amount. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Identifies the Name of the object in which associated. Element for the communication of all codes. Identifies a Hazard associated with a machine, location or any other entity and/or with performing an activity on any of the above entities An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Sales Contact. Methods of establishing communication with the Sales Contact. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The timestamp marking the beginning of a time period during which a related entity. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. The timestamp marking the ending of a time period during which a related entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Is the identifier of the given Line Component within the document The data and time (optional) when this object was created. Indicates the current state of the associated object. Identifies the Task Code for this Labor Line. Identifies date/time the Service Other was invoiced. Estimated Time Duration for the given service or tasks. Actual time duration from a given service or task. Identifies Estimated Cost Price Amount for the service (in transaction currency) Identifies Estimated Cost Price Amount for the service (in transaction currency). Identifies Estimated Cost Price Amount for the service (in transaction currency). Identifies Actual Cost Price Amount for the service (in transaction currency) Identifies Actual Cost Price Amount for the service (in transaction currency). Identifies Actual Cost Price Amount for the service (in transaction currency). Identifies Estimated Rate for the service. Identifies Actual Rate for the service . Is the identifier of the given Line Component within the document Identifies the engineer assigned to the Material Line. Indicates the current state of the associated object. The data and time (optional) when this object was created. Identifies date/time the Service Other was invoiced. Item associated with the Service Material used. Identifies the ShipToParty for the document or the line. Identifies the estimated Delivery Type to be used. Identifies the Delivery Type to was actually used. Identifies estimated quantity. Identifies actual quantity. Identifies invoice quantity associated with the service. Identifies the location of the actual warehouse. Identifies Estimated Cost Price Amount for the service (in transaction currency) Identifies Actual Cost Price Amount for the service (in transaction currency) Identifies Estimated Cost Price Amount for the service (in transaction currency). Identifies Actual Cost Price Amount for the service (in transaction currency). Identifies Estimated Cost Price Amount for the service (in transaction currency). Identifies Actual Cost Price Amount for the service (in transaction currency). Is the primary document id for the document associated. Is the alternate document id for the associated document. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. The datetime on which the object was last modified. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Indicates the priority or urgency of the associated entity. Indicates the current state of the associated object. Is the organization that is the end customer of the goods or services being provided in the associated transaction. Identifies the ShipToParty for the document or the line. Identifies the Asset associated with the Line or Detail of a transaction. A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. null Indicates the service order that proceeded this order or from which this service order originated after further investigation or work was performed. Identifies when the work to be done in this work order was reported The latest date and time (optional) when responses to this document will be accepted. Timestamp in which the service order was changed. Indicates the timestamp when the machine failed or broke down such that it was no longer useable. Indicates the Planned TimePeriod in which the service order is planned to be performed. Is the TimePeriod in which the work is Scheduled to be performed. Is the TimePeriod in which the work was actually done. There maybe multiple occurances of this compound if part of the work was completed and the remainder performed at another time. This may happen when a part needs to be ordered. The budgeted amount of performing this activity. Is the EstimatedAmount of the MaintenanceOrder. Is the ActualAmount of the ServiceOrder. Is an estimate as to how long it will take to complete the ServiceOrder. Is the total time spent working on the ServiceOrder. Is all of the sum of all the occurances of the ActualTimePeriod. Time needed to complete the ServiceOrder. Indicates the status of the machine. Describes the specific type of preventive maintenance sequence being performed/requested. Identifies the service calendar used when scheduling this service order Indicates whether an operation in a service order have to be performed all at once or can be split into non-contiguous work segments. Person ID of the planner - this will be a PlannerPersonID when finalized. It will include the ID attributes. Person ID of the supervisorr - this will be a SupervisorPersonID when finalized. It will include the ID attributes. Person ID of the requestor - this will be a RequestorPersonID when finalized. It will include the ID attributes. Reference to a Project object... Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS.This is done by defining the additional information in XML Schema and referencing the new schema in the xml instance document throught the use of namespaces. Once this is done the additional information defined there can be carried in the BOD XML instance document.The Open Applications Group will make best efforts to quickly consider all proposed submissions.The USERAREA is always the last element in all components, except where the component has been extended inline. Points to the Sales Person's information that is associated with this component. Identifies the preferred engineer to work on the service or activity. Indicates the highest priority when set. The address code of the location at which materials must be received by the ship-to business partner. Identifies the area code of service for this order. Identifies the type of service for this order. The amount of time the service engineer requires to travel (oneway) to the location where the service order is to be implemented. Identifies the customer time frame which includes earliest start and latest finish date and time. Indicates that an appointment has been made with the customer to carry out work on the service order. Identifies the party that the bill or invoice is to be sent. In most cases this is the same as the CustomerParty however there are many cases where the CustomerParty and the BillToParty will be different. Identifies the party or location that the payment is to be sent from. Identifies the types associated with the PaymentTerm. Contains Estimated and Actual Resources for each Material Line. Contains information for each Service Labor Line. Contains information for each Service Is the identifier of the given Line Component within the document Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. A generic reference that uses the 'type' attribute which contains the noun name of the referenced object. Identifies the ShipToParty for the document or the line. Is the identifier of a specific operation. Possible examples of use are in the Manufacturing Routing or the Maintenance Order. or WorkINProcessOperation. Is the total time spent working on the ServiceOrder. Is all of the sum of all the occurances of the ActualTimePeriod. Time needed to complete the ServiceOrder. Is an estimate as to how long it will take to complete the ServiceOrder. Identifies when the work to be done in this work order was reported Is the timestamp that indicates when the ServiceOrder was completed. Includes information regarding the meter reading (eg., MeterID, Recorded Measure, Date/Time of the reading, etc..) Identifies the safety related information associated with a machine, location or any other entity, or with performing an activity on any of the above entities Information on the problem, possible symptoms that may lead to the problem, and the cause and remedy for the problem. Causes and/or remedies could be reported against a failure in a multi-level hierarchical reporting. For example, failure analysis could be recorded as follows; for failure A, causes P and Q are the factors and remedies X, Y and Z are to be taken. Identifies how monetary amounts are distributed accross an organization. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS.This is done by defining the additional information in XML Schema and referencing the new schema in the xml instance document throught the use of namespaces. Once this is done the additional information defined there can be carried in the BOD XML instance document.The Open Applications Group will make best efforts to quickly consider all proposed submissions.The USERAREA is always the last element in all components, except where the component has been extended inline. Indicates the current state of the associated object. building blocks that provide the activity base. Identifies the type of service for this order. A financial classification that indicates to what extent work is covered under warranty or contract, and what part of the activities can be charged. Coverage type is used for cost-related grouping of reference activities. Reference to the ConfiguredAsset BOD. Identifies the customer time frame which includes earliest start and latest finish date and time. Indicates the Planned TimePeriod in which the service order is planned to be performed. Identifies if an appointment has been scheduled. Is the TimePeriod in which the work was actually done. There maybe multiple occurances of this compound if part of the work was completed and the remainder performed at another time. This may happen when a part needs to be ordered. Contains the set of information about a Supplier Party necessary to execute and administer orders or requests. Identifies skills required to perforn the activity. This identifies an CustomerCall document. Each activity will get in the planning phase one or more assignments. Contains Estimated and Actual Resources for each Material Line. Contains information for each Service Labor Line. Contains information for each Service. Identifies the actual problem that is associated with the service or activity. Identifies the actual solution used to resolve the service or activity. Is the identifier of the given Line Component within the document The data and time (optional) when this object was created. Indicates the current state of the associated object. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the Cost Type Code for this Service Other Line. Identifies Estimated Cost Price Amount for the service (in transaction currency) Identifies Estimated Cost Price Amount for the service (in transaction currency). Identifies Estimated Cost Price Amount for the service (in transaction currency). Identifies Actual Cost Price Amount for the service (in transaction currency) Identifies Actual Cost Price Amount for the service (in transaction currency). Identifies Actual Cost Price Amount for the service (in transaction currency). Identifies estimated quantity. Identifies actual quantity. Identifies date/time the Service Other was invoiced. This attribute contains the Code List ID for the codes that are associated with corresponding entity. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Shipping Contact. Mehods of establishing communication with the Shipping Contact. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Indicates the current state of the associated object. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Identifies the sales contact and sales department/organization that is responsible for the sale that the instance is associated. Identifies the contact information of the person, organization, department, or group that is to shipping the contents communicated by the document or line. Identifies the contact information of the person, organization, department, or group that is responsible for customer service. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions date and time this document becomes effective The date and time that the associated object is to be completed. The date and time when the payment terms go into effect. Used in conjunction with NumberOfDays Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Indicates a percentage of discount that is available based on the specified term. The penalty rate (percentage) charged based on the specified term. The amount due based on the terms code expressed in the transaction currency. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. The number of months beyond the Billing Date in which payment is due. The day within the ProxMonth beyond the Billing Date in which payment is due. The daywithin the ProxWeek beyond the Billing Date in which payment is due. The type that is associated with this grouping of terms. The timestamp marking the beginning of a time period during which a related entity. The timestamp marking the ending 1of a time period during which a related entity. This attribute contains the Code List ListID for the code that it is associated with. Safety Hazard Types This attribute contains the Code List ListID for the code that it is associated with. Failure Problem Types This attribute contains the Code List ID for the codes that are associated with corresponding entity. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ListID for the code that it is associated with. Communication Use Codes