Header level informatoin for the schedule. Sequence Schedule Date and Time information associated with the Schedule Line. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. Vanity city name like La Jolla for San Diego The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. Holds the lines that make up the address. Qualifies the further division of the City, example a city may have many districts or Boroughs. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. Holds the lines that make up the address. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The sequence number of this address line. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The sequence number of an address. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates the name of the File being referenced. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type of the file type of the attachment. Specifies how big the file is. Is the title of the person. For example Dr.. When this attribute is true the attachment is stored in the EmbeddedSata element. When it is false an external reference is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Element for the communication of all codes. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Channel Code A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type associated with this group of classifications. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type of Classification of the Location. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ListID for the code that it is associated with. Disposition Codes This attribute contains the Code List ListID for the code that it is associated with. Hold Reason Codes This attribute contains the Code List ListID for the code that it is associated with. Commodity Codes The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Element for the communication of all codes. Element for the communication of all codes. The code value for the dimension identified in the code list. This attribute contains the Code List ListID for the code that it is associated with. GenericStatus A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Contact. Identifies the means of communicating with this contact. Each instance can represent an address, email address, web site or phone number. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Contact. Identifies the means of communicating with this contact. Each instance can represent an address, email address, web site or phone number. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Contact. Identifies the means of communicating with this contact. Each instance can represent an address, email address, web site or phone number. This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the CS Contact. Methods of establishsing communication with the CS Contact. This attribute contains the Code List ListID for the code that it is associated with. Schedule Date Codes This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Indicates the width of an object Indicates the length of an object Indicates the Height of an object Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Indicates the type of dimension that is associated with the Packaging. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Element for the communication of all codes. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Is the primary document id for the document associated. Is the alternate document id for the associated document. Is the identifier of the given Line Component within the document The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The timestamp marking the beginning of a time period during which a related entity. The timestamp marking the ending of a time period during which a related entity. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ListID for the code that it is associated with. Address Format Codes An identifier for an hazardous material. This is an ID provided by an external agency. Specifies the level of marine pollution for this hazardous substance. IMDG Code FlashpointTemperature is related to hazadous substances or goods, indicates the temperature at which the associated substance of goods become flammable, explossive or toxic.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Material Safety Data Sheet Quantity that must be spilled to consider it critical Percent of the net that is the active ingredient. Code of Federal Regulations packaging code - Title 49 Part 173. (Examples: I, II or III) The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Element for the communication of all codes. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. System, or not used The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. System, or not used The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. System, or not used The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. Valid values for the Item are Customer, Supplier, Manufacturer, SKU, and Duplicate. The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Is the identifier of the given Line Component within the document An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Indicates the current state of the associated object. This attribute contains the Code List ListID for the code that it is associated with. Line Types This is required for language codes other than 'en-us' when the element that includes this attribute is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Indicates the current state of the associated object. Identifier of the given location within the scope of the integration Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies location information of the associated parent object. Classification of the location in one or more of the groups defined below Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies location information of the associated parent object. Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Identifier of the given location within the scope of the integration Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Identifies the Name of the Location Address for the given location Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Identifies the Name of the Location From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Identifier of the given location within the scope of the integration Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies location information of the associated parent object. Classification of the location in one or more of the groups defined below Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Identifier of the given location within the scope of the integration Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Represents the identifier of the country of origin of an item, service or shipment An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Holds the Lot IDs associated with the LotSerial. Unique serial number assigned to the given item instance by the manufacturer. Holds ID information associated with the Item's Lots. Indicates the time period in which the associated component is effective. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Unique serial number assigned to the given item instance by the manufacturer. radio frequency identifier (RFID) Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Represents the identifier of the country of origin of an item, service or shipment An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. Is the identifier provided by the customer for the item. Is the identifier provided by Manufacturer for the Item. One example may be the model number. Is the identifier provided by the supplier for the item. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Electronic Product CodeLike the Universal Product Code (UPC) or bar code, the Electronic Product Code(EPC) is the fundamental identifier for a physical object in a EPC Network. The EPC identifies the manufacturer, product, version and serial number, and uses an extra set of digits to identify unique items. The EPC Tag Data Standards Specification Version 1.1 defines the encoding of the Electronic Product Code onto the RFID chip, as well as how it is encoded for use in the information systems layer of the EPC Network (for example the RFID Information Server). GTIN describes a family of GS1 (EAN.UCC) global data structures that employ 14 digits and can be encoded into various types of data carriers. Currently, GTIN is used exclusively within bar codes, but it could also be used in other data carriers such as radio frequency identification (RFID). The GTIN is only a term and does not impact any existing standards, nor does it place any additional requirements on scanning hardware. For North American companies, the UPC is an existing form of the GTIN. Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Identifies the specification of an entity. Complex element that contains information about the hazardous material ratings of the item(s). Identifies the Packaging information for a given item. Note: The UPC here is the UPC of the packaging for a given item. radio frequency identifier (RFID) Unique serial number assigned to the given item instance by the manufacturer. This can be used in three ways: specify multiple serial numbers for a given lot, or specify multiple lots without serial numbers, or specify multiple serial numbers without a LotID. Typically, the parent element that uses LotSerial also provides the ability to provide a single lot number and serial number pair, which can be used for the cases where there are no multiple lots or serial numbers involved. Is the Lot and Serial numbers for the items contained in the associated component by identifing the number of items and the uniques serial number of those items that belong to a given Lot. Identifies the storage location associated with the manufacturing item. The hold codes that are in effect for this instance of the item. Identifies the Lot that a given Item Instance belongs to. Indicates the type of the object in which assoicated. Indicates the time period in which the associated component is effective. Is the time in which the associated entity is actually in process. Indicates whether the ItemQuantity is a fixed size and does not scale along with the quantity of the BOM or Routing being produced Is the maximum number of items that can be put into a lot for this Item. Is the minimum number of items that can be put into a lot for this Item, Is used with the MinimumLotSize and MaximumLotSize. It contains the multiplier between the minimum and maximum manufactured lot quantities. For example, if the maximum lot quantity is 10,000 and the minimum lot quantity is 1000, the lot size multiplier could be 1000. This means the Item may be manufactured in lot sizes starting at 1000 and going up to 10,000 by 1000 increments.For example, 1000, 2000, 3000, etc. A lot of 4500, would not be allowed under these constraints. Is the duration of time that is required to add to a manufacturing process to forecast availability of this Item. This is the percentage of the total quantity on the Bill of Material that is required to be available before the manufacturing process can begin Indicates whether the associated quatities are backflushed or not. Indicates if the associated quatities are reported as they happen. Indicates whether the related object is to be tracked Identifies the status of an item as a scrapped item This attribute contains the Code List ListID for the code that it is associated with. Hazardous Materials - Marine Pollution Levels The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This is required for langauge codes other than 'en-us' when this field is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies where the note is used and is associated to an Infor defined code list, 'NoteType,' that indicates the processes that might use the note. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Provides the dimensions of the associated component. Identifies the code that is associated with the package level that the UPC is designated to. Is the number of instances of the item in the unit of measure contained with in the package. Is the maximum number of instances of an item in the unit of measure that maybe contained within the package. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Identifies the coordinates of the given location. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. This describes a purpose or orientation toward a goal that serves to guide or motivate. Identifies the coordinates of the given location. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the creditor. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the creditor. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Identifies the Role that the generic party is associated with. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The numeric ranking of this element in a collection of like elements where 1 is the preferred option. Indicates that this element is the prefered element in a collection of like elements. This attribute contains the Code List ListID for the code that it is associated with. Priorities An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the resource codes associated with the Project. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Maintains the locations or sites (offices, warehouses, plants) within the enterprise. An explicit period of time for the bucket. The ID that is associated with an acitivity for the Project. Identifies the Type of project that is being referenced. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Indicates the time period in which the associated component is effective. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Element that contains name value pairs. It also includes a data type, unit of measure code, and currencyID Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Element for the communication of all codes. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Is the identifier of the given Line Component within the document An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Sales Contact. Methods of establishing communication with the Sales Contact. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ListID for the code that it is associated with. Schedule Types This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This attribute contains the Code List ListID for the code that it is associated with. Sequence Codes Indicates the date the goods or services must be delivered to the customer. Specified by the customer. The beginning production sequence number, name, or identifier given to a manufactured or assembled item for use in sequenced part requirements and shipments for a given day's requirements. The ending production sequence number, name, or identifier given to a manufactured or assembled item for use in sequenced part requirements and shipments for a given day's requirements Line level informatoin for the schedule within a particular event. Is the primary document id for the document associated. Is the alternate document id for the associated document. The datetime on which the object was last modified. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified A generic reference that uses the 'type' attribute which contains the noun name of the referenced object. The Attachment represents binary data files that may be included within a BOD. These files replace the paper specifications and drawings attached to a BOD definition to clearly communicate design requirements. This Data Type is optional. Attachment usage is further defined by its position. Indicates the current state of the associated object. Identifies the previously received plan schedule that this new schedule is responding to as a reference. The typical scenario is a supplier uses a Sync PlanningSchedule or Sync ShipmentSchedule to respond to a customer demand schedule, and this will identify the customer demand schedule that this supplier previously received. The date and time is also used in identifying the previously received plan schedule that the new plan schedule is responding to. Note that the combination of document id, document date, and revision number can uniquely identify a plan schedule. Indicates the time period in which the associated component is effective. Indicates whether the dates specified on the schedule are delivery based or shipment based. Valid values for this field include: - Ship - Deliver ScheduleType is a code or identifier that describes the specific schedule and can be used in a variety of contexts. When used in the context of employee, ScheduleType refers to the specific schedule for the employee or worker. When used in the context of a Schedule, ScheduleType indicates whether the Schedule is a demand schedule from a customer or a supply schedule from a supplier. Valid values for this context are: “Demand”, “Supplier” Identifies the ShipToParty for the document or the line. In a lot of cases, this is the same as the CustomerParty. In multi-organization purchasing, the CustomerParty may be different from the BuyerParty original EDI message type Is to be used for third party buying to indicate the buying organization. All purchasing scenario will have a CustomerParty is used to indicated the End Customer of the transaction. Identifies the party that the bill or invoice is to be sent. In most cases this is the same as the CustomerParty however there are many cases where the CustomerParty and the BillToParty will be different. Identifies the party that the goods or services are being shipped or sent from. Contains the set of information about a Supplier Party necessary to execute and administer orders or requests. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS.This is done by defining the additional information in XML Schema and referencing the new schema in the xml instance document throught the use of namespaces. Once this is done the additional information defined there can be carried in the BOD XML instance document.The Open Applications Group will make best efforts to quickly consider all proposed submissions.The USERAREA is always the last element in all components, except where the component has been extended inline. Name value pair to contain information provided by and returned to a trading partner. Is the identifier of the given Line Component within the document Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified A generic reference that uses the 'type' attribute which contains the noun name of the referenced object. The Attachment represents binary data files that may be included within a BOD. These files replace the paper specifications and drawings attached to a BOD definition to clearly communicate design requirements. This Data Type is optional. Attachment usage is further defined by its position. Indicates the current state of the associated object. Indicates the type of demand requested. Examples of values for this field include: - Forecast - Firm - Authorization - Past Due - Shipment/Receipt - Other Identifies the previously received plan schedule that this new schedule is responding to as a reference. The typical scenario is a supplier uses a Sync PlanningSchedule or Sync ShipmentSchedule to respond to a customer demand schedule, and this will identify the customer demand schedule that this supplier previously received. The date and time is also used in identifying the previously received plan schedule that the new plan schedule is responding to. Note that the combination of document id, document date, and revision number can uniquely identify a plan schedule. Is the manufacturing view of an Item where the complete detail of an Item is represented by the MasterItem. Indicates the time period in which the associated component is effective. identifies the date on which engineering changes to the item or product is effective. Is the actual delivery date and time of the line item. The date and time that the associated object was received. Indicates the date and time an item was shipped. It is used to specify the last shipment date for the particular sequenced part. Indicates the date and time an item was shipped. It is used to specify the last shipment date for the particular sequenced part. Indicates the actual amount shipped. It is used to specify the last quanity recieved for a particular sequenced part. Is the date time stamp of the last time any thing was received from this supplier. Identifies the quantity that has been delivered. Identifies the quantity of an item. Is the number of items that have been received for the associated entity. This is the quantity of product or item that is shipped. Identifyies the authorization level of the user or application that is sending the Business Object Document Message. This authorization level being recognized be the receiving system indicates what can be done on the receiving system(s). All commodities, technology or software subject to the licensing authority of Bureau of Industry and Security(BIS) are included in the Commerce Control List (CCL) which is found in Supplement 1 to Part 774 of the Export Administration Regulations. On the CCL, individual items are identified by an Export Control Classification Number (ECCN). To determine licensing requirements, you must first classify your item to determine if it is on the CCL. Identifies the location that shipped goods are to be loaded. Complex element that contains information about the hazardous material ratings of the item(s). This is the reference number associated with in-plant routing information. Identifies the Packaging information for a given item. Note: The UPC here is the UPC of the packaging for a given item. Indicates the priority or urgency of the associated entity. Identifies a project that is associated with the given component. Is a reference to the last Delivery received by the customer from the supplier. Is a reference to the last Shipment or ASN received by the customer from the supplier. A generic Party for non-validated or application-validated parties. A work-around for situations where Schema-validation of Parties is not feasible or not desired. Identifies the ShipToParty for the document or the line. In a lot of cases, this is the same as the CustomerParty. In multi-organization purchasing, the CustomerParty may be different from the BuyerParty Identifies the sequence in which the associated entity is to occur with in a given operation, step or business process.. Is the finished good en item. In the case that the Item is raw material or sub-compoenent. This identifies the finished good that it is for. For example in case of Manufacturing an airplane and the compenents used must be tracked. The location on a production line that components are to enter the production line. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS.This is done by defining the additional information in XML Schema and referencing the new schema in the xml instance document throught the use of namespaces. Once this is done the additional information defined there can be carried in the BOD XML instance document.The Open Applications Group will make best efforts to quickly consider all proposed submissions.The USERAREA is always the last element in all components, except where the component has been extended inline. Name value pair to contain information provided by and returned to a trading partner. Identifies the quantity of an item. Identifies the Lot that a given Item Instance belongs to. Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Unique serial number assigned to the given item instance by the manufacturer. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Identifies the method used for selecting the lot for an item. Standard values are ‘Any’, ‘Same’, or ‘Specific’ This element is only used when this lot is a sublot, it has a ParentLotId. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Shipping Contact. Mehods of establishing communication with the Shipping Contact. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. The identifier for a specification. This does not point to another noun and does not use the accounting entity, location or lid attributes. Represents the Properties or Features of the associated entity A code used to indicate if this specification is used to define a minimum, maximum, or target value. An indicator used to identify Specifications that are likely not of interest to an ERP system. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Identifies the sales contact and sales department/organization that is responsible for the sale that the instance is associated. Identifies the contact information of the person, organization, department, or group that is to shipping the contents communicated by the document or line. Identifies the contact information of the person, organization, department, or group that is responsible for customer service. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The timestamp marking the beginning of a time period during which a related entity. The timestamp marking the ending 1of a time period during which a related entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This attribute contains the Code List ListID for the code that it is associated with. Item Types This attribute contains the Code List ListID for the code that it is associated with. UPC Packing Levels This attribute contains the Code List ListID for the code that it is associated with. Communication Use Codes The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. empty type