Is the primary document id for the document associated. Is the alternate document id for the associated document. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. The datetime on which the object was last modified. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified A generic reference that uses the 'type' attribute which contains the noun name of the referenced object. The Attachment represents binary data files that may be included within a BOD. These files replace the paper specifications and drawings attached to a BOD definition to clearly communicate design requirements. This Data Type is optional. Attachment usage is further defined by its position. This identifies the total quantity rejected against this InspectDelivery line. This identifies the total quantity accepted against this InspectDelivery line. This identifies the total quantity inspected against this InspectDelivery line. Total number of inventory items. Identifies the reason for an activity Identifies the party that purchased the goods or services. Contains the set of information about a Supplier Party necessary to execute and administer orders or requests. Contains contact information associated with the Inspector. Identifies a reference to an Inspect Delivery document. References the PurchaseOrder noun. Is a reference to the Delivery document. This describes the reasons for rejecting or accepting the corresponding quantity. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS.This is done by defining the additional information in XML Schema and referencing the new schema in the xml instance document throught the use of namespaces. Once this is done the additional information defined there can be carried in the BOD XML instance document.The Open Applications Group will make best efforts to quickly consider all proposed submissions.The USERAREA is always the last element in all components, except where the component has been extended inline. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. Holds the lines that make up the address. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The sequence number of this address line. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The sequence number of an address. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. Vanity city name like La Jolla for San Diego The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates the name of the File being referenced. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type of the file type of the attachment. Specifies how big the file is. Is the title of the person. For example Dr.. When this attribute is true the attachment is stored in the EmbeddedSata element. When it is false an external reference is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Channel Code This attribute contains the Code List ListID for the code that it is associated with. Hold Reason Codes This attribute contains the Code List ListID for the code that it is associated with. GenericStatus Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the CS Contact. Methods of establishsing communication with the CS Contact. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Is the identifier of the given Line Component within the document This is required for language codes other than 'en-us' when the element that includes this attribute is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Is the primary document id for the document associated. Is the identifier of the given Line Component within the document The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ListID for the code that it is associated with. Address Format Codes Element for the communication of all codes. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. System, or not used The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Identifies the Name of the Location Address for the given location Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Identifier of the given location within the scope of the integration. For details on ID use, see Party section : http://wiki.infor.com:8080/confluence/display/Message/Common Message Elements. Identifies the Name of the Location Address for the given location Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies where the note is used and is associated to an Infor defined code list, 'NoteType,' that indicates the processes that might use the note. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. An identifier for an object. The ID has a number of possible attributes to further define how it should be used..For details on ID use, see Party section : http://wiki.infor.com:8080/confluence/display/Message/Common Message Elements. Tax Identification Number of the creditor. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The numeric ranking of this element in a collection of like elements where 1 is the preferred option. Indicates that this element is the prefered element in a collection of like elements. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Indicates the time period in which the associated component is effective. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties Is the primary document id for the document associated. Is the alternate document id for the associated document. Is the identifier of the given Line Component within the document Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. category - Type of party doing the purchasing - only used with third party procurement. This attribute contains the Code List ListID for the code that it is associated with. Inspect Delivery Reason Codes The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the identifier of the given Line Component within the document Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Indicates the current state of the associated object. The hold codes that are in effect for this instance of the item. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Sales Contact. Methods of establishing communication with the Sales Contact. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Shipping Contact. Mehods of establishing communication with the Shipping Contact. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Identifies the sales contact and sales department/organization that is responsible for the sale that the instance is associated. Identifies the contact information of the person, organization, department, or group that is to shipping the contents communicated by the document or line. Identifies the contact information of the person, organization, department, or group that is responsible for customer service. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ListID for the code that it is associated with. Communication Use Codes