A G/L entity is the smallest organizational unit for which individual financial statements must be drawn up according to relevant commercial law. It is normally the primary balancing segment of the GL Account structure. Typically, this is the owning entity for the transaction. Synonyms are Business Unit, Fund, G/L Company, Joint Venture, Non-Profit Association Name The date that document was created within the system of record. The datetime on which the object was last modified. This is the date the activity was recorded The Type describes the type of activity produced by a cost center in an operation and indicates whether an activity is measured in time or quantity. Current possible values are:Time, Quantity When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The Cost Center is an accumulator of cost information that may be an organizational unit or area of responsibility. It is an organization code that allows a grouping of expenses and costs. The Profit Center is an accumulator of revenue information that may be an organizational unit or area of responsibility. A profit center can be used for internal management control. Profit centers can calculate operating profit using the cost-of-sales accounting and/or period accounting methods Identifies a set of tasks with the following attributes: a singular purpose, a start and end date, those that accumulate costs, and those that may have materials and overhead.SYNONYMS: Job, Process Model, Program, Work Breakdown Structure (WBS) elemen t Identifies the Item associated with the Line or Detail of a transaction. The item provides the details of the generic Item component information. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. A generic reference that uses the 'type' attribute which contains the noun name of the referenced object. The Attachment represents binary data files that may be included within a BOD. These files replace the paper specifications and drawings attached to a BOD definition to clearly communicate design requirements. This Data Type is optional. Attachment usage is further defined by its position. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates the name of the File being referenced. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type of the file type of the attachment. Specifies how big the file is. Is the title of the person. For example Dr.. When this attribute is true the attachment is stored in the EmbeddedSata element. When it is false an external reference is used. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type associated with this group of classifications. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ListID for the code that it is associated with. Disposition Codes Element for the communication of all codes. This attribute contains the Code List ID for the codes that are associated with corresponding entity. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ListID for the code that it is associated with. Countries This is required for language codes other than 'en-us' when the element that includes this attribute is used. Element for the communication of all codes. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Is the primary document id for the document associated. Is the alternate document id for the associated document. Is the identifier of the given Line Component within the document The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Electronic Product CodeLike the Universal Product Code (UPC) or bar code, the Electronic Product Code(EPC) is the fundamental identifier for a physical object in a EPC Network. The EPC identifies the manufacturer, product, version and serial number, and uses an extra set of digits to identify unique items. The EPC Tag Data Standards Specification Version 1.1 defines the encoding of the Electronic Product Code onto the RFID chip, as well as how it is encoded for use in the information systems layer of the EPC Network (for example the RFID Information Server). GTIN describes a family of GS1 (EAN.UCC) global data structures that employ 14 digits and can be encoded into various types of data carriers. Currently, GTIN is used exclusively within bar codes, but it could also be used in other data carriers such as radio frequency identification (RFID). The GTIN is only a term and does not impact any existing standards, nor does it place any additional requirements on scanning hardware. For North American companies, the UPC is an existing form of the GTIN. Identifies if the Item is a Service. Describes the associated item. This identifies the classification of an entity. An entity may be classified into mulitple groups for different reasons. Examples of Classification include Commodity Codes, Freight Classifications, Product Line classifications and so on. Suggested Values are COMMODITY, FREIGHT, PRODUCTLINE. Identifies the specification of an entity. radio frequency identifier (RFID) Unique serial number assigned to the given item instance by the manufacturer. Is the Lot and Serial numbers for the items contained in the associated component by identifing the number of items and the uniques serial number of those items that belong to a given Lot. Identifies the Name of the Location From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Holds ID information associated with the Item's Lots. Indicates the time period in which the associated component is effective. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Unique serial number assigned to the given item instance by the manufacturer. radio frequency identifier (RFID) Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Represents the identifier of the country of origin of an item, service or shipment This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies where the note is used and is associated to an Infor defined code list, 'NoteType,' that indicates the processes that might use the note. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the resource codes associated with the Project. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Maintains the locations or sites (offices, warehouses, plants) within the enterprise. An explicit period of time for the bucket. The ID that is associated with an acitivity for the Project. Identifies the Type of project that is being referenced. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Indicates the time period in which the associated component is effective. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Element for the communication of all codes. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Is the identifier of the given Line Component within the document Is used to describe the quantity of an item. Identifies the Lot that a given Item Instance belongs to. Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Unique serial number assigned to the given item instance by the manufacturer. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Identifies the method used for selecting the lot for an item. Standard values are ‘Any’, ‘Same’, or ‘Specific’ Quantity of items required to fill the lot. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The Cost Center is an accumulator of cost information that may be an organizational unit or area of responsibility. It is an organization code that allows a grouping of expenses and costs. The Profit Center is an accumulator of revenue information that may be an organizational unit or area of responsibility. A profit center can be used for internal management control. Profit centers can calculate operating profit using the cost-of-sales accounting and/or period accounting methods Identifies a set of tasks with the following attributes: a singular purpose, a start and end date, those that accumulate costs, and those that may have materials and overhead.SYNONYMS: Job, Process Model, Program, Work Breakdown Structure (WBS) element Identifies the Item associated with the Line or Detail of a transaction. The item provides the details of the generic Item component information. References the SalesOrder noun. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. A generic reference that uses the 'type' attribute which contains the noun name of the referenced object. The Attachment represents binary data files that may be included within a BOD. These files replace the paper specifications and drawings attached to a BOD definition to clearly communicate design requirements. This Data Type is optional. Attachment usage is further defined by its position. The identifier for a specification. This does not point to another noun and does not use the accounting entity, location or lid attributes. Represents the Properties or Features of the associated entity A code used to indicate if this specification is used to define a minimum, maximum, or target value. An indicator used to identify Specifications that are likely not of interest to an ERP system. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The timestamp marking the beginning of a time period during which a related entity. The timestamp marking the ending 1of a time period during which a related entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used.