Describes the Catalog as a whole and communicates information that pertains to the entire Catalog. Describes the classification scheme as a whole. A Catalog can have one ClassificationScheme associated with it. For example, a classification scheme for inventory management may classify items according to handling characteristics. Describes the items that are in the Catalog. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. Holds the lines that make up the address. Qualifies the further division of the City, example a city may have many districts or Boroughs. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. Holds the lines that make up the address. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The sequence number of this address line. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The sequence number of an address. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. Vanity city name like La Jolla for San Diego The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates the name of the File being referenced. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type of the file type of the attachment. Specifies how big the file is. Is the title of the person. For example Dr.. When this attribute is true the attachment is stored in the EmbeddedSata element. When it is false an external reference is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Is the identifier of the given Line Component within the document Is the primary document id for the document associated. Is the alternate document id for the associated document. The datetime on which the object was last modified. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified A generic reference that uses the 'type' attribute which contains the noun name of the referenced object. The Attachment represents binary data files that may be included within a BOD. These files replace the paper specifications and drawings attached to a BOD definition to clearly communicate design requirements. This Data Type is optional. Attachment usage is further defined by its position. Identifies the Name of the object in which associated. Specifies the currency code of the object in which it is associated. Indicates the time period in which the associated component is effective. UsageRestriction is used to indicate additional restrictions on the Catalog usage. The implementation of this is to be agreed upon between trading partners. An example of usage of this is when a supplier has different Catalogs - one for general usage and others for usage by specific customers/ group of customers. In this scenario, the UsageRestriction can be specified as PUBLIC/ PRIVATE Describes the classification scheme as a whole. A Catalog can have one ClassificationScheme associated with it. For example, a classification scheme for inventory management may classify items according to handling characteristics. dentifies the publisher organization/entity of the Catalog or transaction in which it is associated for the associated. Contains the set of information about a Supplier Party necessary to execute and administer orders or requests. A generic Party for non-validated or application-validated parties. A work-around for situations where Schema-validation of Parties is not feasible or not desired. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS.This is done by defining the additional information in XML Schema and referencing the new schema in the xml instance document throught the use of namespaces. Once this is done the additional information defined there can be carried in the BOD XML instance document.The Open Applications Group will make best efforts to quickly consider all proposed submissions.The USERAREA is always the last element in all components, except where the component has been extended inline. Identifies the Item associated with the Line or Detail of a transaction. The item provides the details of the generic Item component information. All commodities, technology or software subject to the licensing authority of Bureau of Industry and Security(BIS) are included in the Commerce Control List (CCL) which is found in Supplement 1 to Part 774 of the Export Administration Regulations. On the CCL, individual items are identified by an Export Control Classification Number (ECCN). To determine licensing requirements, you must first classify your item to determine if it is on the CCL. This identifies the UOM of any object Contains the set of information about a Supplier Party necessary to execute and administer orders or requests. Identifies the price of the item. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified A generic reference that uses the 'type' attribute which contains the noun name of the referenced object. The Attachment represents binary data files that may be included within a BOD. These files replace the paper specifications and drawings attached to a BOD definition to clearly communicate design requirements. This Data Type is optional. Attachment usage is further defined by its position. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS.This is done by defining the additional information in XML Schema and referencing the new schema in the xml instance document throught the use of namespaces. Once this is done the additional information defined there can be carried in the BOD XML instance document.The Open Applications Group will make best efforts to quickly consider all proposed submissions.The USERAREA is always the last element in all components, except where the component has been extended inline. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Channel Code A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type associated with this group of classifications. The identifier to the classification scheme used by all the items in the Catalog. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Represents the Properties or Features of the associated entity Describes a hierarchical association of classifications. A unique identifier for each ClassificationStructure can also be specified. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type of Classification of the Location. This attribute contains the Code List ListID for the code that it is associated with. GenericStatus This attribute contains the Code List ListID for the code that it is associated with. Disposition Codes This attribute contains the Code List ListID for the code that it is associated with. Commodity Codes The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ListID for the code that it is associated with. Unit Price Codes Element for the communication of all codes. Element for the communication of all codes. The code value for the dimension identified in the code list. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Contact. Identifies the means of communicating with this contact. Each instance can represent an address, email address, web site or phone number. Latitude of the given location Longitude of the given location Is the value and unit of measure in the z-axis in a three dimensional system. Examples of this maybe the Altitude in the case of a map of the world, or the height or shelf in a rack system in the case of a manufacturing or warehouse facility. This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ListID for the code that it is associated with. Currencies An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the CS Contact. Methods of establishsing communication with the CS Contact. This attribute contains the Code List ListID for the code that it is associated with. Days of the Week This is required for language codes other than 'en-us' when the element that includes this attribute is used. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Description of the given timezone This is required for language codes other than 'en-us' when the element that includes this attribute is used. This attribute contains the Code List ListID for the code that it is associated with. Longitude Directions This attribute contains the Code List ListID for the code that it is associated with. Latitude Directions This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Element for the communication of all codes. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Is the identifier of the given Line Component within the document The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ListID for the code that it is associated with. Address Format Codes The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. System, or not used The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. System, or not used The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Unit price of the item for the number of items in the unitCode specified in the PerQuantity elements. In most cases the unitCode of the PerQuantity is the same as the unitCode of the Quantity element above. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Is the reference to the buyer contract information. Is the reference to the supplier contract information. A generic reference that uses the 'type' attribute which contains the noun name of the referenced object. The Attachment represents binary data files that may be included within a BOD. These files replace the paper specifications and drawings attached to a BOD definition to clearly communicate design requirements. This Data Type is optional. Attachment usage is further defined by its position. This defines the prices and modifiers to the price for buying a given quantity or value of an item or item category on a price list line. For Price List Lines that specify Items the price breaks can be specified in terms of quantity or amount. For Price list lines that specify commodity, price breaks can only be specified in terms of currency amount The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Electronic Product CodeLike the Universal Product Code (UPC) or bar code, the Electronic Product Code(EPC) is the fundamental identifier for a physical object in a EPC Network. The EPC identifies the manufacturer, product, version and serial number, and uses an extra set of digits to identify unique items. The EPC Tag Data Standards Specification Version 1.1 defines the encoding of the Electronic Product Code onto the RFID chip, as well as how it is encoded for use in the information systems layer of the EPC Network (for example the RFID Information Server). GTIN describes a family of GS1 (EAN.UCC) global data structures that employ 14 digits and can be encoded into various types of data carriers. Currently, GTIN is used exclusively within bar codes, but it could also be used in other data carriers such as radio frequency identification (RFID). The GTIN is only a term and does not impact any existing standards, nor does it place any additional requirements on scanning hardware. For North American companies, the UPC is an existing form of the GTIN. Identifies if the Item is a Service. Describes the associated item. This identifies the classification of an entity. An entity may be classified into mulitple groups for different reasons. Examples of Classification include Commodity Codes, Freight Classifications, Product Line classifications and so on. Suggested Values are COMMODITY, FREIGHT, PRODUCTLINE. Identifies the specification of an entity. radio frequency identifier (RFID) Unique serial number assigned to the given item instance by the manufacturer. Is the Lot and Serial numbers for the items contained in the associated component by identifing the number of items and the uniques serial number of those items that belong to a given Lot. Unit code is not required for this measure element since it is already expressed in the name of the element. Unit code is not required for this measure element since it is already expressed in the name of the element. Unit code is not required for this measure element since it is already expressed in the name of the element. Valid values are: North or South Identifies the Name of the Location Address for the given location Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Identifier of the given location within the scope of the integration Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies location information of the associated parent object. Classification of the location in one or more of the groups defined below Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Identifier of the given location within the scope of the integration Identifies the Name of the Location Directions for the given location Identifies the coordinates of the given location. Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies location information of the associated parent object. Classification of the location in one or more of the groups defined below Timezone of the given location true when this location is a valid pick-up location for the web storefront. Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Unit code is not required for this measure element since it is already expressed in the name of the element. Unit code is not required for this measure element since it is already expressed in the name of the element. Unit code is not required for this measure element since it is already expressed in the name of the element. Valid values are: East or West An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Holds ID information associated with the Item's Lots. Indicates the time period in which the associated component is effective. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Unique serial number assigned to the given item instance by the manufacturer. radio frequency identifier (RFID) Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Represents the identifier of the country of origin of an item, service or shipment The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This is required for langauge codes other than 'en-us' when this field is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies the name attribute used by the NameValue element. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension Identifies the name attribute used by the NameValue element. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Identifies the name attribute used by the NameValue element. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies where the note is used and is associated to an Infor defined code list, 'NoteType,' that indicates the processes that might use the note. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. This describes a purpose or orientation toward a goal that serves to guide or motivate. Identifies the coordinates of the given location. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the creditor. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the creditor. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Identifies the Role that the generic party is associated with. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The numeric ranking of this element in a collection of like elements where 1 is the preferred option. Indicates that this element is the prefered element in a collection of like elements. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Indicates the time period in which the associated component is effective. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Indicates the time period in which the associated component is effective. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Indicates the time period in which the associated component is effective. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Attribute schemeID='java.FQCN' indicates the value is a Java fully qualified class name. schemeID='infor.bus.service.instance' identifies an instance of a service in the BUS. However, this value is completely ignored by the BUS, the value is stored, but not interpreted. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Sales Contact. Methods of establishing communication with the Sales Contact. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is used to describe the quantity of an item. Identifies the Lot that a given Item Instance belongs to. Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Unique serial number assigned to the given item instance by the manufacturer. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Identifies the method used for selecting the lot for an item. Standard values are ‘Any’, ‘Same’, or ‘Specific’ Quantity of items required to fill the lot. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Shipping Contact. Mehods of establishing communication with the Shipping Contact. The identifier for a specification. This does not point to another noun and does not use the accounting entity, location or lid attributes. Represents the Properties or Features of the associated entity A code used to indicate if this specification is used to define a minimum, maximum, or target value. An indicator used to identify Specifications that are likely not of interest to an ERP system. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Is the identifier of the given Line Component within the document Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Identifies the sales contact and sales department/organization that is responsible for the sale that the instance is associated. Identifies the contact information of the person, organization, department, or group that is to shipping the contents communicated by the document or line. Identifies the contact information of the person, organization, department, or group that is responsible for customer service. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. Identifies the month (eq., Jan, Feb, Mar, etc..) for the given date. Indentifies the week number (1 - 52) for the given date. Identifies the day (eq., Monday, Tuesday, Wednesday, etc...) for the given date. Identifies the month (eq., Jan, Feb, Mar, etc..) for the given date. Indentifies the week number (1 - 52) for the given date. Identifies the day (eq., Monday, Tuesday, Wednesday, etc...) for the given date. This is offset from UTC time in decimal hours Daylight savings time start date Includes a break down of the DaylightStartDate (e.g., month, week, day). Daylight savings time end date Includes a break down of the DaylightEndDate (e.g., month, week, day). Free form text that describes the object and repeats as needed to provide support for multilingual descriptions This is required for language codes other than 'en-us' when the element that includes this attribute is used. The monetary value of the object in which the amount is associated Indicates the PerQuantity side of this Amount. Typically, this value is 1 with a uom of each, meaning that, e.g., a UnitPrice with the Amount 1.29 would be the price per each or simply $1.29 each. For pricing wire, the UnitPrice Amount might be $7.00 with a PerQuantity of 100 and a uom of LinearFeet, meaning the unit price would be $7 per 100 linear feet. Element for the communication of all codes. This attribute contains the Code List ListID for the code that it is associated with. UOM Codes This attribute contains the Code List ListID for the code that it is associated with. Usage Restriction Codes This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This attribute contains the Code List ListID for the code that it is associated with. Communication Use Codes empty type