Contains header information associated with the BOR object. Contains operation information associated with the BOR object. This is required for langauge codes other than 'en-us' when this element is used. The sequence number of an address. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. Vanity city name like La Jolla for San Diego The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. This attribute contains the Code List ListID for the code that it is associated with. Adjustment Groups This attribute contains the Code List ListID for the code that it is associated with. Adjustment Types An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Indicates the current state of the associated object. Is the identifier of the given Line Component within the document An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The code for the currency associated with an amount. Currency Code This is required for language codes other than 'en-us' when the element that includes this attribute is used. The code for the currency associated with an amount. Amount for a specific type in the base or book currency. The type is identified by the type code and can include Total, Extended and other amount types. ExtendedAmount, TotalAmount The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. The code for the currency associated with an amount. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Unit of measure Required for this unit of measure. Is the primary document id for the document associated. Is the alternate document id for the associated document. All dates and times will be provided in GMT. The date and time when this document was created. This element repeats as needed to provide support for multilingual descriptions. A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Indicates the current state of the associated object. Document reference for referencing BillOfResource/Operation. Indicates this is the primary BillOfResources for the Primary OutputItem date and time this document becomes effective Date and time that this document becomes inactive This attribute contains the Code List ListID for the code that it is associated with. Calculation Methods Is the multiplier appied to the base amount or the base quantity in order to calculate the amount. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The Chargeable amount for this requisition. The quantity of the Chargeable item. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The Charge amount in the transaction currency Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Allows the sender to indicate how the Charge/Allowance was calculated. Charge code Identifies the exchange rate between two currencies An explicit period of time for the bucket. Identifies the Name of the object in which associated. Indicates the tax for the object associated. The basis amount for each quantity of 1 of the unit of measure. The amount of the adjustment for each quantity of 1 of the unit of measure. A code used to identify the purpose of an adjustment. Could include codes for non-itemized and pre-tax. A code used group charges or allowances together to simplify posting for those systems that cannot or do not support a full range of adjustments. Identifies how the object being referenced is to be calculated. This is the unit of measure code that is assigned to this package. This must be unique within the item/supplier. Specifies the currency rate of the object in which it is associated. Used by pricing to indicate that the calculation is based on the gross weight rather than the net weight. Base Currency Amount sequence in which charge occurred. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The Chargeable amount for this requisition. The quantity of the Chargeable item. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The Charge amount in the transaction currency Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Allows the sender to indicate how the Charge/Allowance was calculated. Charge code Identifies the exchange rate between two currencies An explicit period of time for the bucket. Identifies the Name of the object in which associated. Indicates the tax for the object associated. The basis amount for each quantity of 1 of the unit of measure. The amount of the adjustment for each quantity of 1 of the unit of measure. A code used to identify the purpose of an adjustment. Could include codes for non-itemized and pre-tax. A code used group charges or allowances together to simplify posting for those systems that cannot or do not support a full range of adjustments. Identifies how the object being referenced is to be calculated. This is the unit of measure code that is assigned to this package. This must be unique within the item/supplier. Specifies the currency rate of the object in which it is associated. Used by pricing to indicate that the calculation is based on the gross weight rather than the net weight. Base Currency Amount sequence in which charge occurred. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Suggested Values are COMMODITY, FREIGHT, PRODUCTLINE A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Suggested Values are COMMODITY, FREIGHT, PRODUCTLINE This attribute contains the Code List ListID for the code that it is associated with. Skills OperatonStatus This attribute contains the Code List ID for the codes that are associated with corresponding entity. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ListID for the code that it is associated with. Disposition Codes This attribute contains the Code List ListID for the code that it is associated with. Item Status This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ListID for the code that it is associated with. GenericStatus This is the name of one of Dimensions that are maintained by the PublicMDM. These can be user defined or provided by Infor, OAGIS, etc… The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ListID for the code that it is associated with. Machine Setup Dependencies The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This attribute contains the Code List ListID for the code that it is associated with. Tax Jurisdiction Codes Element for the communication of all codes. Element for the communication of all codes. GenericStatus Is the identifiers of the given constrained resource Type of Resource ie welder, mechanic, machine operator, etc. The number of resource required of the specified resource type Is the identifiers of the given constrained resource Type of Resource ie welder, mechanic, machine operator, etc. The number of resource required of the specified resource type input item Schedule Line number Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified The document reference is used to associate the Requisition line to the other documents so that the proper accounting entried can be determined. While most information can be inferred from the associated documents the ideal interface should include the master data that is referenced by the associated documents so that the system that builds the actual accounting entries isn't required to read as many documents. This is required if the line exists. If this is set to 0 on an existing line then this has the effect of deleting the line. Indicates the date in which the buyer/customer requests the order to be delivered. When an “earliest” date/time is given, it is the latest date/time the customer wants the order delivered. Is the number of deliveries for the quantity on Schedule. Is the amount of time over the intended taget time or date that is allowed. Duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. These components are ordered in their significance by their order of appearance i.e. as year, month, day, hour, minute, and second. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Electronic Product CodeLike the Universal Product Code (UPC) or bar code, the Electronic Product Code(EPC) is the fundamental identifier for a physical object in a EPC Network. The EPC identifies the manufacturer, product, version and serial number, and uses an extra set of digits to identify unique items. The EPC Tag Data Standards Specification Version 1.1 defines the encoding of the Electronic Product Code onto the RFID chip, as well as how it is encoded for use in the information systems layer of the EPC Network (for example the RFID Information Server). Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Identifies the specification of an entity. Complex element that contains information about the hazardous material ratings of the item(s). Identifies the Packaging information for a given item. Note: The UPC here is the UPC of the packaging for a given item. Is the Lot and Serial numbers for the items contained in the associated component by identifing the number of items and the uniques serial number of those items that belong to a given Lot. consumed item line number. A generic reference that uses the 'type' attribute which contains the noun name of the referenced object. Indicates the current state of the associated object. Indicates the type of Item being consumed. Name given to the item Indicates the Quantity of the input item Contains originating information associated with the consumed item. Indicator to determine if prior operations should be back flushed. Planned cost of the given item Percentage of yield Factor used to determine amount of scrap based on the amount/quantity of input item Amount of input item to be scrapped Indicates the time period in which the associated component is effective. Schedule for input items for operations. Specify when input items are required. Alternate ItemConsumed to produce same output item. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Indicates whether the related object is to be tracked Indicates if the related item(s) are used by default for the given operation This attribute contains the Code List ListID for the code that it is associated with. Container Types Effectivity percentage This is the amount of time consumed or used. Duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. The amount of cost for the current operation for the specified cost rate type percent of the total cost of the operation to be applied to the specified cost rate type amount of cost represented by quantity of a resources used (ie number of kilowatt hours used) Cost rate type code (machine, burden, labour, contractor, etc..) Type of cost to report (planned, actual, estimated…) This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The source Currency Code for the monetary amount to be converted. Specifies the unit base of the source currency for currencies with small denominations. The target Currency Code for the monetary amount to be converted. Specifies the unit base of the target currency for currencies with small denominations. Is the multiplier appied to the base amount or the base quantity in order to calculate the amount. Indicates the time period in which the associated component is effective. This is required for langauge codes other than 'en-us' when this field is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Indicates the width of an object Indicates the length of an object Indicates the Height of an object Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Indicates the type of dimension that is associated with the Packaging. Disposition Code Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Element for the communication of all codes. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. This is the operation ID Identifies the engineering change revision that this entity addresses. This is the the ID if this instance is a non-item consumable Identifies the engineering change revision that this entity addresses. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. This is the ItemConsumed ID Identifies the engineering change revision that this entity addresses. This is the BillOfResources ID This is the revision ID Is the primary document id for the document associated. Is the identifier of the given Line Component within the document The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. Is the primary document id for the document associated. Is the identifier of the given Line Component within the document The Name of the noun that is being referenced. Is the primary document id for the document associated. Is the identifier of the given Line Component within the document The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. These co Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is the identifiers of the given equipment resource Type of Resource ie welder, mechanic, machine operator, etc. Number of pieces of equipment needed of the resource type code requested. The timestamp marking the beginning of a time period during which a related entity. duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. These co The timestamp marking the ending of a time period during which a related entity. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Unit of measure Required when the flashpoint is used. This attribute contains the Code List ListID for the code that it is associated with. Address Format Codes An identifier for an hazardous material. This is an ID provided by an external agency. Used to identify a Medical First Aid Guide (MFAG) for hazardous substance. Technical name means a recognized chemical name or microbiological name currently used in scientific and technical handbooks, journals, and texts. Generic descriptions are authorized for use as technical names provided they readily identify the general chemical group, or microbiological group. Examples of acceptable generic chemical descriptions are organic phosphate compounds, petroleum aliphatic hydrocarbons and tertiary amines. For proficiency testing only, generic microbiological descriptions such as bacteria, mycobacteria, fungus, and viral samples may be used. Trade names may not be used as technical names. Specifies the level of marine pollution for this hazardous substance. IMDG Code FlashpointTemperature is related to hazadous substances or goods, indicates the temperature at which the associated substance of goods become flammable, explossive or toxic.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Material Safety Data Sheet Quantity that must be spilled to consider it critical Percent of the net that is the active ingredient. Code of Federal Regulations packaging code - Title 49 Part 173. (Examples: I, II or III) Required when this measure is used The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. Valid values for the Item are Customer, Supplier, Manufacturer, SKU, and Duplicate. The ID of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this item, in the case where the ID is from another system, this is the LogicalID of that system. The name of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this product The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This can reference any other noun that is relevant to this transaction such as SalesOrder, ProductionOrder, or Transfer The name of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this product The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. This is required for langauge codes other than 'en-us' when this element is used. Type of instructions Required for this unit of measure. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Required for this unit of measure. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Required when this measure is used Required when this measure is used The ID of the location where this item is stored. This is the ID if the used in conjunction with the item ID for identifying the ItemLocation objects. Identifies the Name of the Location Address for the given location Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The ID of the location where this item is stored. This is the ID if the used in conjunction with the item ID for identifying the ItemLocation objects. Identifies the Name of the Location Address for the given location Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Holds ID information associated with the Item's Lots. Indicates the time period in which the associated component is effective. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Unique serial number assigned to the given item instance by the manufacturer. radio frequency identifier (RFID) Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Represents the identifier of the country of origin of an item, service or shipment Indicates whether the machine can be setup for the operation early or wheter setup must happen at a specific time depending upon conditions. This attribute contains the Code List ListID for the code that it is associated with. Hazardous Materials - Marine Pollution Levels Required when this measure is used The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The code for the currency associated with an amount. The code for the currency associated with an amount. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Required when this measure is used This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when this field is used. This is required for langauge codes other than 'en-us' when this field is used. This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. EngineeringReference' or 'DrawingNumber' Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies where the note is used and is associated to an Infor defined code list, 'NoteType,' that indicates the processes that might use the note. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. This is required for langauge codes other than 'en-us' when this field is used. Indicates type of note An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Indicates type of note An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. Is the identifiers for the Operation Person(s) Type of Resource ie welder, mechanic, machine operator, etc. Number of Operation Persons need based on the ResourceType code ID or sequence of the operation. ID of the next operation. To be filled in on all operations but the last. This element repeats as needed to provide support for multilingual descriptions. A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Common References to DocumentReferences Indicates the current state of the associated object. Item(s) Consumed in order to produce a desired item(s) The resulting item from the given Items Consumed and Operation(s) Constrained Resource References Identifies the type of container used to place the items that result from the operation. Is a process code used for grouping like operations. Possible examples are: Heat Treat, Dyeing List of codes indicating whether the machine can be setup for the operation early or whether setup must happen at a specific time depending upon conditions. Defines a maximum number of parallel work teams allowed. The fixed number of parts that will be rejected during setup, and teardown of an operation. This is the quantity of a product or item made during a batch production run or the amount of material produced by the operation being defined. An example would be how many cookies are produced by a particular operation. Indicates the number of items that have perished within the operation Indicates the number of items that have perished between operations. This is quantity to be transferred between operations within one lot. This is the time it takes to setup to run the operation. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is the time an operation can wait after being run. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is the time per item to perform the specific operation. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is the time it takes to tear down from running an operation. The time it takes before setup for another operation can be performed. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is a fixed duration of time indicating the time it takes to perform a batch operation. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is the time the job may be in the queue before being able to be run at the work center location. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is the time it takes to move the part from one work center location to another work center location. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is the fixed duration of time where the time it takes to perform the operation is known and fixed prior to the operation being performed. An example of this would be something sent out to be worked, where the duration of the processis known before it actually happens.. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is the percentage to be rejected This is the amount of time to wait before beginning the next operation. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is the amount of time to wait before beginning this operation. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. Indicates that time can be saved by running this operation multiple times. Indicates whether the operation should be tracted. Represents the different Charges that may be applied to the associated document. Step(s) of the given operation Effictivity percentage Yield Percentage Skills required to perform this operation Identifies points in the process that is associated with certain actions. Indicates the quantity of items scraped References to tools needed to perform this step. Operation Person References Equipment References This identifies an area consisting of one or more resources where production takes place. It is used to identify a specific Work Center on a Shop Floor or other manufacturing facility The number of times this operation is to be repeated Indicates that the associated entity terminates the given process. Planned cost of the given item The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ListID for the code that it is associated with. Countries Indicates the destination country of the item(s) OED: A rate, number or proportion in each hundred. output item Schedule Line number Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified The document reference is used to associate the Requisition line to the other documents so that the proper accounting entried can be determined. While most information can be inferred from the associated documents the ideal interface should include the master data that is referenced by the associated documents so that the system that builds the actual accounting entries isn't required to read as many documents. This is required if the line exists. If this is set to 0 on an existing line then this has the effect of deleting the line. Indicates the date in which the buyer/customer requests the order to be delivered. When an “earliest” date/time is given, it is the latest date/time the customer wants the order delivered. Is the number of deliveries for the quantity on Schedule. Is the amount of time over the intended taget time or date that is allowed. Duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. These components are ordered in their significance by their order of appearance i.e. as year, month, day, hour, minute, and second. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Electronic Product CodeLike the Universal Product Code (UPC) or bar code, the Electronic Product Code(EPC) is the fundamental identifier for a physical object in a EPC Network. The EPC identifies the manufacturer, product, version and serial number, and uses an extra set of digits to identify unique items. The EPC Tag Data Standards Specification Version 1.1 defines the encoding of the Electronic Product Code onto the RFID chip, as well as how it is encoded for use in the information systems layer of the EPC Network (for example the RFID Information Server). Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Identifies the specification of an entity. Complex element that contains information about the hazardous material ratings of the item(s). Identifies the Packaging information for a given item. Note: The UPC here is the UPC of the packaging for a given item. Unique serial number assigned to the given item instance by the manufacturer. Is the Lot and Serial numbers for the items contained in the associated component by identifing the number of items and the uniques serial number of those items that belong to a given Lot. Indicates the type of Item Data ie. Primary Indicates the time period in which this item is effective. Is the time in which the associated item is actually in process. Indicates wether the ItemQuantity is a fixed size and does not scale along with the quantity of the ItemConsumed being produced. Is the maximum number of items that can be put into a lot for this item. Is the minimum number of items that can be put into a lot for this item. Is the duration of time that is required to add to a manufacturing process to forecast availability of this item. This is the percentage of the total quantity on the Bill of Material that is required to be available before the manufacturing process can begin. Indicator to determine if prior operations should be back flushed. Indicates whether the related object is to be tracked. Indicates if an item is a scrapped item. output item line number. default=100 - divide required qty by factor Used to indicate if the item is to be put back into the process Batch size quantity. Quantity Produced Indicates the quantity of the given item in transit Indicates the quantity of the given item in the warehouse Rejection quantity and reason Planned cost of the given item Percentage of cost allocated Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Schedule of when output items are to be released to the warehouse. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Provides the dimensions of the associated component. Identifies the code that is associated with the package level that the UPC is designated to. Is the number of instances of the item in the unit of measure contained with in the package. Is the maximum number of instances of an item in the unit of measure that maybe contained within the package. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Unit of measure The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Unit of measure Required when this measure is used This attribute contains the Code List ID for the codes that are associated with corresponding entity. The numeric ranking of this element in a collection of like elements where 1 is the preferred option. Indicates that this element is the prefered element in a collection of like elements. This attribute contains the Code List ListID for the code that it is associated with. Process Codes The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Required for this unit of measure. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Indicates the time period in which the associated component is effective. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties Required when this measure is used. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This is required to define every quantity. Use only ISO Units of Measure. Unit of measure The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Required when this measure is used This attribute contains the Code List ListID for the code that it is associated with. Rate Types This is required for language codes other than 'en-us' when the element that includes this attribute is used. This attribute contains the Code List ListID for the code that it is associated with. Reasons for Charge ChargeReason This attribute contains the Code List ListID for the code that it is associated with. Item Schedule Reason Code The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Quantity of a given item rejected. Reject code that applies to the given quantity of an item rejected. Required for this unit of measure. This attribute contains the Code List ListID for the code that it is associated with. Reject Reasons The code for the currency associated with an amount. Code identifying skill required Name of the skill required. Number of crew members required for this skill Indicator to determine if this is the primary skill required An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Operation Person Resource ID EquipmentID ConstrainedResourcetID ResourceCode This attribute contains the Code List ListID for the code that it is associated with. Resource Codes The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Unit of measure This attribute contains the Code List ListID for the code that it is associated with. Sequence Codes Identifies the quantity of an item. Identifies the Lot that a given Item Instance belongs to. Indicates whether an item is active, incative, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Unique serial number assigned to the given instance by the manufacturer. Description of the given lot. Notes pertaining to the given lot of items. Any, Same, Specific This element is only used when this lot is a sublot, it has a ParentLotId. Identifies the quantity of an item. Identifies the Lot that a given Item Instance belongs to. Indicates whether an item is active, incative, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Unique serial number assigned to the given instance by the manufacturer. Description of the given lot. Notes pertaining to the given lot of items. Any, Same, Specific This element is only used when this lot is a sublot, it has a ParentLotId. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ListID for the code that it is associated with. Currencies This is required for language codes other than 'en-us' when the element that includes this attribute is used. The identifier for a specification. This does not point to another noun and does not use the accounting entity, location or lid attributes. Represents the Properties or Features of the associated entity A code used to indicate if this specification is used to define a minimum, maximum, or target value. An indicator used to identify Specifications that are likely not of interest to an ERP system. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Master data operations will have the statuses of 'Pending', 'Active', or 'Obsolete'. date and time this document becomes effective Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. A BillOfResources will have the statuses of 'Pending', 'Active', or 'Obsolete'. date and time this document becomes effective Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. Sequence number of this step. This element repeats as needed to provide support for multilingual descriptions. A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Common References to DocumentReferences Indicates the type of step Identifies the sequence in which the step is to occur with in a given operation, step or business process. Represents the different Charges that may be applied to the associated document. References to tools needed to perform this step. Instructions pertaining to the step Constrained Resource References Operation Person References Equipment References This attribute contains the Code List ListID for the code that it is associated with. Currencies This is required for language codes other than 'en-us' when the element that includes this attribute is used. The code for the currency associated with an amount. Element for the communication of all codes. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Defines the tax authority to which taxes must be paid. The determining location is the location to which the asset was delivered. The taxable amount for this tax jurisdiction expressed in the transaction currency Free form text that describes the object and repeats as needed to provide support for multilingual descriptions This is used to represent the tax amount for this jurisdiction in the currency of the taxing authority. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Identifies the sequence of how the taxes must be applied. This is required for langauge codes other than 'en-us' when this field is used. The timestamp marking the beginning of a time period during which a related entity. The timestamp marking the ending 1of a time period during which a related entity. The ID assigned to an associated Resource. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Unit of measure This attribute contains the Code List ListID for the code that it is associated with. Step Types Item Types The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ListID for the code that it is associated with. UPC Packing Levels Required when this measure is used The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute.