A container that holds a list of IDs without RevisionID. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. The datetime on which the object was last modified. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Indicates the current state of the associated object. Identifies the Name of the object in which associated. If the name components are also sent then this must be sent first. Is the title of the person. For example Dr.. Way the person is addressed e.g. Honorable etc? This is the Person's given name or first name. A name added to or substituted for the proper name of the person. This is the person's middle name. This is the person's family name. A woman's family name before she is married. Used of a surname that is replaced by a woman when she marries. Also called birth name. This follows a person’s full name and provides additional information about the person. Post-nominal letters indicate that the individual holds a position, educational degree, accreditation, office or honour. Identifies the position or designation of the pesron with whom associated within the given organization. Examples are Director, Software Engineer, Purchasing Manager etc A text description of the responsibility of the associated entity. The name given to a division of a business specializing in a particular product or service. Information about communication at the summary (channel) level A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Identifies the suppliers or customers that employs the contact. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS.This is done by defining the additional information in XML Schema and referencing the new schema in the xml instance document throught the use of namespaces. Once this is done the additional information defined there can be carried in the BOD XML instance document.The Open Applications Group will make best efforts to quickly consider all proposed submissions.The USERAREA is always the last element in all components, except where the component has been extended inline. Captures the Contact Activity. Idetifies the employee that is assigned to the contact. A Code indicating the sex of the individual in which it is associated. A code indicating the martial status of the individual in which it is associated. Birth date of the person. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The timestamp marking the beginning of a time period during which a related entity. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. The timestamp marking the ending of a time period during which a related entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The sequence number of this address line. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. The name of the person to whom this document would be intended. The name that the associated entity is sent by. Holds the lines that make up the address. The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. The building or house name on the street that identifies the location. The street name of the building or house that identifies the location. The unit of the building or house that identifies the location. The floor of the building or house that identifies the location. The post office box that is used for the location. Id entifies the Dock or the Mail Stop or Lane or any other specific Delivery Point. Qualifies the further division of the City, example a city may have many districts or Boroughs. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. Options are text or discrete. If the discrete type is used it must be preceeded by the text version. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. This is required for language codes other than 'en-us' when the element that includes this attribute is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates the name of the File being referenced. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type of the file type of the attachment. Specifies how big the file is. Is the title of the person. For example Dr.. When this attribute is true the attachment is stored in the EmbeddedSata element. When it is false an external reference is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Channel Code This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type associated with this group of classifications. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Element for the communication of all codes. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Indicates the default language for the associated object. This can be any valid language code. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This indicates which of the CommunicationDetail instances is preferred within the ChannelCode. No two CommunicationDetail elements that have the same ChannelCode may be marked as preferred. One CommunicationDetail element for each ChannelCode may be marked as preferred, but it is not required. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Indicates if the associated object should be used. This is used, for example, with channel codes to indicate which methods of communication may be used for a customer or contact. Indicates that this channel is the prefered method of communicating with the contact. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Date and Time the sales activity took place. Name of the materials requested. (i.e. brochure, materials, etc.) Name of the materials sent. (i.e. brochure, materials, etc.) Indicates Whether an Email was Sent. Example could be: Sent, digit- - number of times sent, Received, Not Sent, Undeliverable, Email address not available Result of Activity Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. Specifies the type of contact. For example: Manager, Assistant, etc.. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. A short subject which describes the task. Indicates the priority or urgency of the associated entity. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Indicates the current state of the associated object. Provides a list of category codes that identify the capabilities and features of the associated object. Whether the task is Private or Not. Defines parent sales task. In Customer support scenarios one can associate Escalation level which could be numbers or textual. Indicates the Planned TimePeriod in which the service order is planned to be performed. Is the TimePeriod in which the work is Scheduled to be performed. Provides the structure to indicate a Date/Time period where the Time is provided with in the Start and Duration or EndDateTime. How much of the task has been completed. Time currently spent on the Task while it is in progress, Planned Effort could be in terms of weeks, days, man months, etc, Actual Effort could be in terms of weeks, days, man months, etc, How often the task repeats ex, Hourly, weekly or Monthy A generic reference that uses the 'type' attribute which contains the noun name of the referenced object. The Attachment represents binary data files that may be included within a BOD. These files replace the paper specifications and drawings attached to a BOD definition to clearly communicate design requirements. This Data Type is optional. Attachment usage is further defined by its position. This attribute contains the Code List ListID for the code that it is associated with. Countries This is required for language codes other than 'en-us' when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Is the primary document id for the document associated. Is the alternate document id for the associated document. Is the identifier of the given Line Component within the document The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. This attribute contains the Code List ListID for the code that it is associated with. Email Result Codes Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Indicates the current state of the associated object. Identifies whether the employer is Supplier or Customer. This attribute contains the Code List ListID for the code that it is associated with. Escalation Levels This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This attribute contains the Code List ListID for the code that it is associated with. Address Format Codes This attribute contains the Code List ListID for the code that it is associated with. Genders This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This attribute contains the Code List ListID for the code that it is associated with. Marital Status This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies where the note is used and is associated to an Infor defined code list, 'NoteType,' that indicates the processes that might use the note. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The timestamp marking the beginning of a time period during which a related entity. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. The timestamp marking the ending of a time period during which a related entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This attribute contains the Code List ListID for the code that it is associated with. Priorities Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Indicates the time period in which the associated component is effective. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties This attribute contains the Code List ListID for the code that it is associated with. Repeating Frequencies This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The timestamp marking the beginning of a time period during which a related entity. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. The timestamp marking the ending of a time period during which a related entity. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. empty type