The Remittance Advice Header contains information that applies to the entire remittance advice. This Component is required. To be entered. At least one occurrence of this Component is required for each occurrence of the Remittance Advice. Holds the lines that make up the address. The Number of the building or house on the street that identifies where to deliver mail. For example, Building 300 on Standards Parkway The building or house name on the street that identifies where to deliver mail Identifies the Dock or the Mail Stop or Lane or any other specific Delivery Point. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. Indicates the current state of the associated object. The name of the person or organization that the associated entity is intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The Number of the building or house on the street that identifies where to deliver mail. For example, Building 300 on Standards Parkway The building or house name on the street that identifies where to deliver mail Identifies a Post Office Box number The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Indicates the current state of the associated object. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The Number of the building or house on the street that identifies where to deliver mail. For example, Building 300 on Standards Parkway The building or house name on the street that identifies where to deliver mail Identifies the Dock or the Mail Stop or Lane or any other specific Delivery Point. The city must be provided for an address. The code for the State, Province, County or other subdivision of a country. CountryCode Postal Code of the Address. Indicates the current state of the associated object. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The name of the person or organization that the associated entity is intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The Number of the building or house on the street that identifies where to deliver mail. For example, Building 300 on Standards Parkway The building or house name on the street that identifies where to deliver mail Identifies the Dock or the Mail Stop or Lane or any other specific Delivery Point. The city must be provided for an address. The code for the State, Province, County or other subdivision of a country. CountryCode Postal Code of the Address. Indicates the current state of the associated object. Holds preference information for the instance of the object being referenced. Holds the lines that make up the address. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. Indicates the current state of the associated object. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The name of the person or organization that the associated entity is intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The Number of the building or house on the street that identifies where to deliver mail. For example, Building 300 on Standards Parkway The building or house name on the street that identifies where to deliver mail Identifies the Dock or the Mail Stop or Lane or any other specific Delivery Point. The city must be provided for an address. The code for the State, Province, County or other subdivision of a country. CountryCode Postal Code of the Address. Indicates the current state of the associated object. Holds preference information for the instance of the object being referenced. Holds the lines that make up the address. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. Indicates the current state of the associated object. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The sequence number of this address line. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The sequence number of an address. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The sequence number of an address. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The sequence number of an address. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The sequence number of this address line. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The sequence number of an address. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The sequence number of this address line. This is required for language codes other than 'en-us' when the element that includes this attribute is used. required when more than one address line is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The name of the person or organization that the associated entity is intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The Number of the building or house on the street that identifies where to deliver mail. For example, Building 300 on Standards Parkway The building or house name on the street that identifies where to deliver mail Identifies the Dock or the Mail Stop or Lane or any other specific Delivery Point. The city must be provided for an address. The code for the State, Province, County or other subdivision of a country. CountryCode Postal Code of the Address. Indicates the current state of the associated object. Holds preference information for the instance of the object being referenced. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This attribute contains the Code List ListID for the code that it is associated with. Communication Channel Codes A collection of codes with a sequence added to the codes for ordering. A free form text description of the object. Identifies the type of Classification of the Location. A collection of codes with a sequence added to the codes for ordering. A free form text description of the object. Identifies the type of Classification of the Location. A collection of codes with a sequence added to the codes for ordering. A free form text description of the object. Identifies the type of Classification of the Location. This attribute contains the Code List ID for the codes that it are associated with corresponding entity. This attribute contains the Code List ID for the codes that it are associated with corresponding entity. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that it are associated with corresponding entity. This attribute contains the Code List ListID for the code that it is associated with. RemittanceAdviceStatus This attribute contains the Code List ID for the codes that it are associated with corresponding entity. This attribute contains the Code List ID for the codes that it are associated with corresponding entity. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that it are associated with corresponding entity. This attribute contains the Code List ID for the codes that it are associated with corresponding entity. This attribute contains the Code List ID for the codes that it are associated with corresponding entity. This attribute contains the Code List ListID for the code that it is associated with. GenericStatus This attribute contains the Code List ID for the codes that it are associated with corresponding entity. This attribute contains the Code List ID for the codes that it are associated with corresponding entity. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that it are associated with corresponding entity. The code value for the dimension identified in the code list. The code value for the dimension identified in the code list. The code value for the dimension identified in the code list. RemittanceAdviceStatus The country dialing code for a communication number. The area dialing code for a communication number. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. The area dialing code for a communication number. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. The area dialing code for a communication number. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. The area dialing code for a communication number. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. The area dialing code for a communication number. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Contact. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Code that identifies the prefered language of the contact. Identifies the type of contact, such as requestioner, the buyer, customer service, etc Name of the Contact. Job Title of the Contact. Describes the responsibilities of the Contact. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Code that identifies the prefered language of the contact. Identifies the type of contact, such as requestioner, the buyer, customer service, etc Name of the Contact. Job Title of the Contact. Describes the responsibilities of the Contact. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Code that identifies the prefered language of the contact. Identifies the type of contact, such as requestioner, the buyer, customer service, etc Name of the Contact. Job Title of the Contact. Describes the responsibilities of the Contact. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Code that identifies the prefered language of the contact. Identifies the type of contact, such as requestioner, the buyer, customer service, etc Name of the Contact. Job Title of the Contact. Describes the responsibilities of the Contact. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Code that identifies the prefered language of the contact. Identifies the type of contact, such as requestioner, the buyer, customer service, etc This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that it are associated with corresponding entity. This attribute contains the Code List ListID for the code that it is associated with. Currencies This attribute contains the Code List ID for the codes that it are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for langauge codes other than 'en-us' when this element is used. This is the ID of the noun identified below. This is to support codes that represent anopther noun in the system as an abstact access method. Identifies the engineering change revision that this entity addresses. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Is the primary document id for the document associated. The date that document was created within the system of record. Is the identifier of the given Line Component within the document Name of the noun that is being referenced The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Basic Bank Account Number International Bank Account Number UNION PROPERTY INVESTORS, INC. From Public MDM dimension currecyCode Identifies the Name of the object in which associated. Indicates the current state of the associated object. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Although the schema supports multiple accounts only one should be used at this time. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Supplier or Customer The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. System, or not used The ID of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this item, in the case where the ID is from another system, this is the LogicalID of that system. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Any Noun name The name of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this Code The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. Supplier or Customer The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. System, or not used The ID of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this item, in the case where the ID is from another system, this is the LogicalID of that system. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. Supplier or Customer The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies the Name of the Location Address for the given location A free form text description of the object. A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Identifies the Name of the Location Address for the given location From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Identifier of the given location within the scope of the integration. For details on ID use, see Party section : http://wiki.infor.com:8080/confluence/display/Message/Common Message Elements. Identifies the Name of the Location Address for the given location A free form text description of the object. A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Classification of the location in one or more of the groups defined below From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Identifier of the given location within the scope of the integration. For details on ID use, see Party section : http://wiki.infor.com:8080/confluence/display/Message/Common Message Elements. Identifies the Name of the Location Address for the given location A free form text description of the object. A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Classification of the location in one or more of the groups defined below From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Identifier of the given location within the scope of the integration. For details on ID use, see Party section : http://wiki.infor.com:8080/confluence/display/Message/Common Message Elements. Identifies the Name of the Location Address for the given location A free form text description of the object. A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Classification of the location in one or more of the groups defined below From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. This is required for langauge codes other than 'en-us' when this field is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies the name attribute used by the NameValue element. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies where the note is used and is associated to an Infor defined code list, 'Note1Type,' that indicates the processes that might use the note. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies where the note is used and is associated to an Infor defined code list, 'Note2Type,' that indicates the processes that might use the note. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies where the note is used and is associated to an Infor defined code list, 'Note3Type,' that indicates the processes that might use the note. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies where the note is used and is associated to an Infor defined code list, 'Note4Type,' that indicates the processes that might use the note. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies where the note is used and is associated to an Infor defined code list, 'Note5Type,' that indicates the processes that might use the note. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. This is required for langauge codes other than 'en-us' when this element is used. Note type code from Public MDM. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. An identifier for an object. The ID has a number of possible attributes to further define how it should be used..For details on ID use, see Party section : http://wiki.infor.com:8080/confluence/display/Message/Common Message Elements. The ID of the customer or supplier that initiated the transaction. This is typically the customer, but there are situations where the supplier can initiate a payment transaction. For details on ID use, see Party section : http://wiki.infor.com:8080/confluence/display/Message/Common Message Elements. Tax Identification Number of the creditor. Dun and Bradstreet Commercial And Government Entity Department of Defense Activity Address Code Bank Identifier Code The ID of the Payee or supplier that initiated the transaction. This is typically the Payee, but there are situations where the supplier can initiate a payment transaction. For details on ID use, see Party section : http://wiki.infor.com:8080/confluence/display/Message/Common Message Elements. Tax Identification Number of the creditor. Dun and Bradstreet Commercial And Government Entity Department of Defense Activity Address Code Bank Identifier Code The ID of the customer or supplier that initiated the transaction. This is typically the customer, but there are situations where the supplier can initiate a payment transaction. For details on ID use, see Party section : http://wiki.infor.com:8080/confluence/display/Message/Common Message Elements. Tax Identification Number of the creditor. Dun and Bradstreet Commercial And Government Entity Department of Defense Activity Address Code Bank Identifier Code The ID of the customer or supplier that initiated the transaction. This is typically the customer, but there are situations where the supplier can initiate a payment transaction. For details on ID use, see Party section : http://wiki.infor.com:8080/confluence/display/Message/Common Message Elements. Tax Identification Number of the creditor. Dun and Bradstreet Commercial And Government Entity Department of Defense Activity Address Code Bank Identifier Code Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Party Role Code The code for the currency associated with an amount. This attribute contains the Code List ListID for the code that it is associated with. Payment Methods This attribute contains the Code List ID for the codes that it are associated with corresponding entity. This is required for language codes other than 'en-us' when the element that includes this attribute is used. The numeric ranking of this element in a collection of like elements where 1 is the preferred option. Indicates that this element is the prefered element in a collection of like elements. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Indicates the time period in which the associated component is effective. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Open, Partially Received, Fully Received, Credited, Closed, Canceled, On-Hold date and time this document becomes effective Indicator that determines if the BOD has been archived. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. Indicator that determines if the BOD has been archived. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Indicator that determines if the BOD has been archived. Open', 'Closed', 'Pending' or 'Deleted'. The status codes will have different meaning depending upon the direction of the document, inbound or outbound. date and time this document becomes effective Indicator that determines if the BOD has been archived. Is the primary document id for the document associated. The date that document was created within the system of record. A free form text description of the object. A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Indicates the current state of the associated object. date and time this document becomes effective Party initiating the payment to the forwarding or first agent. This can be the debtor (in a credit transfer), the creditor (in a direct debit) or a party that initiates the payment on behalf of the debtor or creditor. Identifies the party that the bill or invoice is to be sent. In most cases this is the same as the CustomerParty however there are many cases where the CustomerParty and the BillToParty will be different. Complex element that contains information about the financial institution handling a transaction. Identifies the party or location that the payment is to be remitted to or sent to. Generic Party … Cash \, Cheque \, CreditCard \, DebitCard \, ElectronicFundsTransfer \, ProcurementCard \, BankDraft \, PurchaseOrder \, CreditTransfer Indicates the total amount of the object associated. This includes the Price and the total of all the charges, allowances and taxes. Unique and unambiguous identification of a transaction, as assigned by any of the parties on the initiating side, which will be passed on throughout the entire end-to-end chain. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS.This is done by defining the additional information in XML Schema and referencing the new schema in the xml instance document throught the use of namespaces. Once this is done the additional information defined there can be carried in the BOD XML instance document.The Open Applications Group will make best efforts to quickly consider all proposed submissions.The USERAREA is always the last element in all components, ex cept where the component has been extended inline. Line number A free form text description of the object. A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified This is used to reference the RequireProduct BODs for this line. Indicates the current state of the associated object. Amount of payment Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS.This is done by defining the additional information in XML Schema and referencing the new schema in the xml instance document throught the use of namespaces. Once this is done the additional information defined there can be carried in the BOD XML instance document.The Open Applications Group will make best efforts to quickly consider all proposed submissions.The USERAREA is always the last element in all components, ex cept where the component has been extended inline. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The code for the currency associated with an amount. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ListID for the code that it is associated with. CommunicationUseCode