Contains the header information associated with the Hierarchy object. The Hierarchy is made up of Nodes which are used for accounting analysis, grouping of codes, and lookups. Points to the accounting entity codes associated with the filter. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates the name of the File being referenced. The date that document was created within the system of record. A free form text description of the object. Identifies the type of the file type of the attachment. Specifies how big the file is. Is the title of the person. For example Dr.. This attribute contains the Code List ID for the codes that it are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The ListID is the DocumentID of the Code that is the Code Type for this list. Defines the context for the Code Type when the code type is for a calendar or chart of accounts. Field on the object being the discriminator The code used for the document name. Indicates that this hierarchy is the enterprise organizational hierarchy. HierarchyStatusCode Is the identifier of the given Line Component within the document Reference to the schedule of consumed items in manufacturing. Is the identifier of the given Line Component within the document This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for language codes other than 'en-us' when the element that includes this attribute is used. This is required for langauge codes other than 'en-us' when this field is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. This is the system ID for this hierarchy Identifies the engineering change revision that this entity addresses. Is the primary document id for the document associated. The date that document was created within the system of record. Is the identifier of the given Line Component within the document References the Operation noun. The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Is the ending timestamp of the event. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that it are associated with corresponding entity. Is the primary document id for the document associated. Is the alternate document id for the associated document. All dates and times will be provided in GMT. The date and time when this document was created. A free form text description of the object. A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified A generic reference that uses the 'type' attribute which contains the noun name of the referenced object. The Attachment represents binary data files that may be included within a BOD. These files replace the paper specifications and drawings attached to a BOD definition to clearly communicate design requirements. This Data Type is optional. Attachment usage is further defined by its position. Indicates the current state of the associated object. Every name must be unique in the enterprise. This name is multilingual Reference to the type of the Code. Default = False. Indicates if all of the codes in the dimension must be assigned to a node on the hierarchy. Default = False. Indicates if this hierarchy is used for security purposes. Default = False. Indicates if this hierarchy is used by the pricing fortress for the creation of price books. Indicates that this hierarchy is the enterprise organizational hierarchy. Default = False. Indicates if this hierarchy is created to facilitate lookups. Indicates the time period in which the associated component is effective. Values must conform to RFC 1766. Represents the Properties or Features of the associated entity When true, this flag indicates that all codes from the hierarchies ‘based on’ code list are assigned to a node in the hierarchy. Every code in the basis code lists will roll up to a node on every layer of the hierarchy. The ‘Unassigned node’ does not count as a node in this case. Any hierarchies used for executive reporting will have this flag set to true. Contains elements to maintain hierarchy layers for a layer based hierarchy. Sets the layer(s) code list, order and if layers are to be fully resolved. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS.This is done by defining the additional information in XML Schema and referencing the new schema in the xml instance document throught the use of namespaces. Once this is done the additional information defined there can be carried in the BOD XML instance document.The Open Applications Group will make best efforts to quickly consider all proposed submissions.The USERAREA is always the last element in all components, except where the component has been extended inline. Identifier that represents a Hierarchy Node. The name associated with a node. For example, if a region hierarchy is made created using multiple territories then the region name is put in this element. It can be repeated so the name can be entered in multiple languages. The ID of the node that is the parent of this node in the hierarchy. Indicates if this node is the root node of the hierarchy. Indicates the default node of the hierarchy. This is the node that leafs are assigned to if they are not specifically assigned to a node via a rule. The rules for assigning leafs to this node. This element may be deprecated as the assignment rules are only relevant to the fortress. When the node is created to represent a code which may not be included in the noun that is being mapped into the hierarchy, this is the code so that other applications can track back the meaningof the hierarchy. Represents the Properties or Features of the associated entity Indicates that the node has been assigned. This will improve the efficiency in locating the node. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This can reference any other noun that is relevant to this transaction such as SalesOrder, ProductionOrder, or Transfer The ID of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this item, in the case where the ID is from another system, this is the LogicalID of that system. The name of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this product The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. Code list's code When true, this flag indicates that all codes from the hierarchies ‘based on’ code list are assigned to a node in the hierarchy. Every code in the basis code lists will roll up to a node on every layer of the hierarchy. The ‘Unassigned node’ does not count as a node in this case. Any hierarchies used for executive reporting will have this flag set to true. This is required for langauge codes other than 'en-us' when this field is used. Identifies the name attribute used by the NameValue element. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that it are associated with corresponding entity. Identifies the name attribute used by the NameValue element. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. name of the property data type of the property - need to define a code list for this attribute. It will also be used for custom nouns. If the value is a quantity, this is the unit code associated with the value. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that it are associated with corresponding entity. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Used For individually selected members Used when members are sleected by a range. Used when members are sleected by a range. Used when members are sleected by wildcard. Represents the Properties or Features of the associated entity Allows an accounting entity code to be associated with a hierarchy rule. Only to be used when the hierarchy rule basis is a code list maintained at AE level. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies where the note is used and is associated to an Infor defined code list, 'Note1Type,' that indicates the processes that might use the note. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies where the note is used and is associated to an Infor defined code list, 'Note2Type,' that indicates the processes that might use the note. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies where the note is used and is associated to an Infor defined code list, 'Note3Type,' that indicates the processes that might use the note. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. This is required for language codes other than 'en-us' when the element that includes this attribute is used. Identifies where the note is used and is associated to an Infor defined code list, 'Note4Type,' that indicates the processes that might use the note. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. This is required for langauge codes other than 'en-us' when this field is used. Identifies where the note is used and is associated to an Infor defined code list, 'NoteType,' that indicates the processes that might use the note. Indicates if the note should be published externally or if it is for internal use only. It may have the values 'Internal' and 'External'. Person who created the note Entry date and time in GMT. Status of a note. This attribute contains the Code List ListID for the code that it is associated with. Noun Names This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. A free form text description of the object. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. References to Items that have been consumed in manufacturing. References to output items in manufacturing. Is the identifier of the given Line Component within the document Reference to the schedule of output items in manufacturing. Is the identifier of the given Line Component within the document When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is the tag and information of the new information to be passed. A free form text description of the object. A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Indicates the time period in which the associated component is effective. This attribute contains the Code List ID for the codes that it are associated with corresponding entity. Is the tag and information of the new information to be passed. A free form text description of the object. A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Indicates the time period in which the associated component is effective. This attribute contains the Code List ListID for the code that it is associated with. Hierarchy Node Properties Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Indicates the time period in which the associated component is effective. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties Is the tag and information of the new information to be passed. A free form text description of the object. A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified Indicates the time period in which the associated component is effective. This attribute contains the Code List ListID for the code that it is associated with. Hierarchy Properties This attribute contains the Code List ListID for the code that it is associated with. Hierarchy Node Source Codes This is required for language codes other than 'en-us' when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Open', 'Closed', 'Pending', or 'Deleted' Indicator that determines if the BOD has been archived. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The ID of the entity that created the ID. When the schemeName is 'Customer' or 'Supplier' then this value is the ID of the customer or supplier. The name of the entity that created the ID when there is no ID for that agency - like for government agencies. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for language codes other than 'en-us' when the element that includes this attribute is used.