A project contract header groups a set of contract lines that represent mutually independent, contractual agreements with the same external party. The project contract line contains detailed information for price, shipping, payment and billing terms. Each individual contract line can be related to a project. The contract lines of a single project contract represent mutually independent, contractual agreements. Is the primary document id for the document associated. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. The datetime on which the object was last modified. A reference tot he person that took the action that caused this BOD to be published. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Indicates the current state of the associated object. Points to the Contract Initiator's information. Points to the Contract Manager's information. The phase the contract is in. Valid values from the user-definable code list 'Phase Codes'. A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Points to the Program Manager's information. The program code for the contract. Valid values from the user-definable code list 'Project Programs'. The reference text to be printed on external documents, such as acknowledgements, for example, the name of a contact person or a customer reference number. Is the organization that is the end customer of the goods or services being provided in the associated transaction. Contains the set of information about a Supplier Party necessary to execute and administer orders or requests. Points to the Sales Person""s information that is associated with this component. Code which defines the contracting type; a value from the extensible code list 'Project Contract Execution Types'. Valid values include: Main Contracting, Subcontracting. Code which defines the contract type; a value from the extensible code list 'Project Contract Types'. Valid values include: Fixed Price, Cost Reimbursement, Time and Materials. The date when the contract (line) is awarded. The date when the validity period of the contract starts. The date when the validity period of the contract ends. currency rate type The total amount of the contract. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. The total invoiced amount related to this component. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. The maximum amount that is funded for the contract. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Code which defines the contract acceptance point; a value from the extensible code list 'Project Contract Acceptance Points'. Valid values include: Source Acceptance, Destination Acceptance, Source and Destination Acceptance, Not Applicable. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Indicates what type of note is being specified and is associated to an Infor defined code list, ''Note Types,'' This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Is the primary document id for the document associated. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Is the identifier of the given Line Component within the document A Facility identifies a location within an entity. The facility may have sub-locators identified using a sequenced identification notation e.g. Warehouse A100 Sub-Location 11, Row R10 would be represented as an array of three Facility elements with values as A100, 11, R10, name attribute as Warehouse, Sub-Location and Row and sequence attribute as 1,2 and 3 respectively. Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type associated with this group of classifications. Element for the communication of all codes. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Identifies the contact information for the buying person, organization, department, or group on the associated document or line. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifier for Standard Carrier Alpha Code . The identification of the identification scheme The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Identifier of the given location within the scope of the integration Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. The building or house name on the street that identifies the location. The street name of the building or house that identifies the location. The unit of the building or house that identifies the location. The floor of the building or house that identifies the location. The post office box that is used for the location. The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The sequence number of an address. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Channel Code This attribute contains the Code List ListID for the code that it is associated with. Communication Use Codes Holds the lines that make up the address. The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. The building or house name on the street that identifies the location. The street name of the building or house that identifies the location. The unit of the building or house that identifies the location. The floor of the building or house that identifies the location. The post office box that is used for the location. Qualifies the further division of the City, example a city may have many districts or Boroughs. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. The sequence number of this address line. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The numeric ranking of this element in a collection of like elements where 1 is the preferred option. Indicates that this element is the prefered element in a collection of like elements. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Contact. Identifies the type of contact, such as requester, the buyer, customer service, etc Code that identifies the prefered language of the contact. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Code that identifies the prefered language of the contact. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Identifier of the given location within the scope of the integration Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. Identifies the Role of the SalesPerson. This attribute contains the Code List ListID for the code that it is associated with. Sales Person Roles This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Is the primary document id for the document associated. A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Is the identifier of the given Line Component within the document Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Indicates the current state of the associated object. Points to the Contract Line Initiator's information. Points to the Contract Line Manager's information. The phase the contract line is in. Valid values from the user-definable code list 'Phase Codes'. A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. The date and time on which the contract line was last modified. The data and time when the contract line was created. Reference to a ProjectMaster noun Name value pair to contain information provided by and returned to a trading partner. Is the organization that is the end customer of the goods or services being provided in the associated transaction. Contains the set of information about a Supplier Party necessary to execute and administer orders or requests. Points to the Sales Person""s information that is associated with this component. Code which defines the contracting type; a value from the extensible code list 'Project Contract Execution Types'. Valid values include: Main Contracting, Subcontracting. Code which defines the contract type; a value from the extensible code list 'Project Contract Types'. Valid values include: Fixed Price, Cost Reimbursement, Time and Materials. The date when the contract (line) is awarded. The date when the validity period of the contract line starts. The date when the validity period of the contract line ends. Default currency rate type used for the translation of contract line related amounts. The total amount of the contract line. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Monetary amount used for consolidation at contract level. The total invoiced amount related to this component. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Monetary amount used for consolidation at contract level. The maximum amount that is funded for the contract line. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Monetary amount used for consolidation at contract level The date requested by the customer for delivering the contract. The amount that defines the sales potential for this component. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. The agreed limit for which the costs are covered by the contract. Is only applicable to contracts of the type Cost Reimbursement and Time and Materials. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. The percentage added to the material costs to reach a sales amount. The percentage added to the labor costs to reach a sales amount. The percentage added to the equipment costs to reach a sales amount. The percentage added to the subcontracting costs to reach a sales amount. The percentage added to the sundry costs to reach a sales amount. Code which defines the contract acceptance point; a value from the extensible code list 'Project Contract Acceptance Points'. Valid values include: Source Acceptance, Destination Acceptance, Source and Destination Acceptance, Not Applicable. Identifies the ShipToParty for the document or the line. Identifies the party that the goods or services are being shipped or sent from. Identifies the party that the bill or invoice is to be sent. In most cases this is the same as the CustomerParty however there are many cases where the CustomerParty and the BillToParty will be different. The billing type for this component; a value from the extensible code list 'Billing Types'. Valid values include: Cost Plus, Unit Rate, Installment, Progress Invoice, Delivery Based. The percentage calculated as a discount on the invoice amount of the contract line. A way to categorize invoices by their delivery method. User-defined value of the code list 'Invoice Delivery Methods'. A code that allows one to identify the kind of sale made and the kind of receivable. User-defined value of the code list 'Sales Types'. Indicates whether or not the reference text must be printed on external documents. Default False. The reference text to be printed on external documents, such as acknowledgements, for example, the name of a contact person or a customer reference number. The installment type for the project contract line; a value from the exensible code list 'Installment Types'. Valid values include: Amount, Percent, Points. The total number of points that one can distribute to the installments of the contract line. Only applies when the installment type is Points. The last date and time (part of) the contract line was billed. The method used to define how holdback is defined for the contract line. Holdback is a percentage amount that the customer withholds from the contract amount. This serves as a guarantee that all activities are performed, and that contractual obligations are met. A value from the exensible code list 'Holdback Types'. Valid values include: All Invoices, Based on Progress, No Holdback. The holdback amount expressed as a percentage. The holdback percentage makes sense only if the holdback type is All Invoices or Based on Progress. The progress threshold percentage for the contract line. The progress threshold percentage is only applicable if the holdback type is All Invoices or Based on Progress. Identifies the party or location that the payment is to be sent from. Complex element that contains information about the financial institution handling a transaction. Identifies the types associated with the PaymentTerm. Is the payment method code for the associate entity. Date and time that the associated entity took place . Points to the person who last modified the contract line. Identifies the reason for changing the contract line. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the Type of project that is being referenced. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Element that contains name value pairs. It also includes a data type, unit of measure code, and currencyID Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. The code for the currency associated with an amount; in this case the project contract currency. The code for the currency associated with an amount; in this case the project contract currency. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Identifier of the given location within the scope of the integration Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. System, or not used The ID of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this item, in the case where the ID is from another system, this is the LogicalID of that system. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Identifier of the given location within the scope of the integration Identifies the Name of the Location Address for the given location Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. Used to indicate if a location is not a physical internal warehouse, but rather one used for tracking direct shipments. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Identifies the contact information of the person, organization, department, or group that planned for the timing of the exchange of goods/services that this document is associated at the document or line level. Identifies the contact information for the buying person, organization, department, or group on the associated document or line. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the party - Identifier for a business or individual provided by the government. This maybe a FIIN, Social Security Number, or Drivers License Number to name a few. Identifier for business provided by Dun and Bradstreet. The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The name of the entity that created the ID. This is only used when the ID is defined externally and there is no ID for that agency - like for government agencies. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Code that identifies the prefered language of the contact. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Code that identifies the prefered language of the contact. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Specifies bank branch and bank account details for the party Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. The clearinghouse member ID Holds information associated with branch locations. Provides bank account details. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the financial institution. Identifier for business provided by Dun and Bradstreet. The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. National Bank ID is the ID assigned by a central bank, a bank supervisory body or a Bankers Association in a country to all its licensed member banks or financial institutions. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Identifies the Name of the Location Address for the given location From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The name of the entity that created the ID. This is only used when the ID is defined externally and there is no ID for that agency - like for government agencies. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Tax Identification Number of the party - Identifier for a business or individual provided by the government. This maybe a FIIN, Social Security Number, or Drivers License Number to name a few. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. National Bank ID is the ID assigned by a central bank, a bank supervisory body or a Bankers Association in a country to all its licensed member banks or financial institutions. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Identifies the Name of the Location Address for the given location From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. The building or house name on the street that identifies the location. The street name of the building or house that identifies the location. The unit of the building or house that identifies the location. The floor of the building or house that identifies the location. The post office box that is used for the location. The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Basic Bank Account Number International Bank Account Number UNION PROPERTY INVESTORS, INC. Holds the account ids associted with this Financial Party instance. Specifies the currency code of the object in which it is associated. Identifies the Name of the object in which associated. used to identify the account as savings, checking or other type of financial account. Holds preference information for the instance of the object being referenced. Indicates the current state of the associated object. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. This attribute contains the Code List ListID for the code that it is associated with. Currencies This attribute contains the Code List ID for the codes that are associated with corresponding entity. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ListID for the code that it is associated with. GenericStatus Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. The clearinghouse member ID Provides bank account details. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. National Bank ID is the ID assigned by a central bank, a bank supervisory body or a Bankers Association in a country to all its licensed member banks or financial institutions. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Basic Bank Account Number International Bank Account Number UNION PROPERTY INVESTORS, INC. Holds the account ids associted with this Financial Party instance. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. A container that holds a list of IDs without RevisionID. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A code used to uniquely a payment term. Identifies the types associated with the PaymentTerm. The sequence attribute is used for the ordering when PaymentTerm@type=''Installment''. Other types of Payment Term do not require any sequence. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This attribute contains the Code List ListID for the code that it is associated with. Payment Methods The ID of the accounting entity that is associated with this ID Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Indicates what type of note is being specified and is associated to an Infor defined code list, ''Note Types,'' This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it.