Information that generally describes the maintenance order Is the primary document id for the document associated. Is the alternate document id for the associated document. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. The datetime on which the object was last modified. A reference tot he person that took the action that caused this BOD to be published. The date and time when this document was created. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. The Attachment represents binary data files that may be included within a BOD. These files replace the paper specifications and drawings attached to a BOD definition to clearly communicate design requirements. This Data Type is optional. Attachment usage is further defined by its position. 1-99 with 1 being highest priority and 99 being lowest. For High, Medium and Low; the values should be 1, 50, and 99 Indicates the maintenance order that proceeded this order or from which this maintenance order originated after further investigation or work was performed. Indentifies when the work to be done in this maintenance order was reported Indicates the date by which a response is expected for this maintenance order. Timestamp in which the maintenance order was changed Indicates the timestamp when the machine failed or broke down such that it was no longer useable Indicates the Planned TimePeriod in which the maintenance order is planned to be performed. Given to the customer. Is the TimePeriod in which the work is actually Scheduled to be done. Is the TimePeriod in which the work was actually done. The budgeted amount of performing this activity. High level estimated amount for this maintenance order. Acctual cost accrued for this maintenance order. Estimated and actual duration are available, but are based upon the logic of the system that created the work order. In other words it could be calendar, actual work, and linear work and it is up to these systems to ensure that the measure is consistent across the implementation. See: EstimatedDuration The durartion of time remaining to carry out this maintenance order. Idenitifies a machine. A Facility identifies a location within an entity. The facility may have sub-locators identified using a sequenced identification notation e.g. Warehouse A100 Sub-Location 11, Row R10 would be represented as an array of three Facility elements with values as A100, 11, R10, name attribute as Warehouse, Sub-Location and Row and sequence attribute as 1,2 and 3 respectively. Is an Identifier that describes the Work Package Describes the specific type of preventive maintenance sequence being performed or requested. ID of thew calendar that contains the busy reference for this maintenance order. Indicates whether an operation in a maintenance order have to be performed all at once or can be split into non-contiguous work segments. Indicates the planner of the Maintenance Order. Is the person supervising/managing the maintenance work being performed/requested. Is the person requesting the maintenance work to be performed. Indentifies a project that is associated with the given component Identifies how monetary amounts are distributed across an organization. The position of the Distribution within a Business Object Document provides the context and additional meaning. This Identifies resources that are required to perform the maintenance operation. This is for a high level estimate This Identifies resources that are required to perform the maintenance operation. This is for a high level estimate Identifies the safety related information associated with a machine, location or anyother entity or with performing an activity on any of the above entities. Information on the problem, possible symptoms that may lead to the problem, and cause and remedy for the problem. Causes and /or remedies could be reported against a failure in a multi-level hierarchical reporting. For example, failure analysis could be record as follows; for failure A , causes P and Q are the factors and remedies X, Y and Z are to be taken. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Indicates the current state of the associated object. Identifies the Asset associated with the Line or Detail of a transaction. Reference to the Public Sector Location noun from a non-public sector noun. An item of economic, commercial or exchange value that has a tangible or material existence. Physical assets are the opposite of intangible assets, which have value but are nonphysical such as leases, computer programs or agreements. Physical assets can be inventoried or stored, although they may go through depletion, depreciation, deterioration or shrinkage in the storage process. Indicates if this work is classified as warranty work. Date work is required to start. Date work is required to be completed. roll up of detail estimate This identifies the classifications of this maintenance order. an interval during which a machine is not productive, as during repair, malfunction, maintenance. This is the MaintenanceOrder number Identifies the engineering change revision that this entity addresses. This can reference any other noun that is relevant to this transaction such as SalesOrder, ProductionOrder, or Transfer The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for langauge codes other than 'en-us' when this field is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Indicates what type of note is being specified and is associated to an Infor defined code list, ''Note Types,'' This is required for langauge codes other than 'en-us' when this field is used. Is the primary document id for the document associated. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Is the identifier of the given Line Component within the document A Facility identifies a location within an entity. The facility may have sub-locators identified using a sequenced identification notation e.g. Warehouse A100 Sub-Location 11, Row R10 would be represented as an array of three Facility elements with values as A100, 11, R10, name attribute as Warehouse, Sub-Location and Row and sequence attribute as 1,2 and 3 respectively. Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. The Name of the noun that is being referenced. This can reference any other noun that is relevant to this transaction such as SalesOrder, ProductionOrder, or Transfer Identifies the engineering change revision that this entity addresses. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates the name of the File being referenced. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type of the file type of the attachment. Specifies how big the file is. Is the title of the person. For example Dr.. When this attribute is true the attachment is stored in the EmbeddedSata element. When it is false an external reference is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ListID for the code that it is associated with. Priorities The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The timestamp marking the beginning of a time period during which a related entity. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. The timestamp marking the ending of a time period during which a related entity. The timestamp marking the beginning of a time period during which a related entity. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. The timestamp marking the ending of a time period during which a related entity. The timestamp marking the beginning of a time period during which a related entity. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. The timestamp marking the ending of a time period during which a related entity. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. Identifies the resource ID that is associated with the Machine. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Represents the Properties or Features of the associated entity A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Is the fixed asset code of the machine. Indicates the current state of the associated object. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Indicates what type of note is being specified and is associated to an Infor defined code list, ''Note Types,'' This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ListID for the code that it is associated with. Machine Properties This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type associated with this group of classifications. Element for the communication of all codes. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This attribute contains the Code List ListID for the code that it is associated with. Fixed Asset Codes Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ListID for the code that it is associated with. GenericStatus This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Project ID number Describes this project reference The ID that is associated with an acitivity for the Project. cost pegged Project Element Project type The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Identifies the description types that is associated with the Project. This is required for langauge codes other than 'en-us' when this field is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the financial ledger to be used when updating balances OED: A rate, number or proportion in each hundred. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The monetary value of the object in which the amount is associated Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Is the GLAccount for the associated document and component. Reference to a ProjectMaster noun A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. Is the primary account classification within a chart of accounts. For example reveune, Fixed Asset, Land, Buildings, etc. The name associated with this account. This element will likely not be used by existing ERP systems. Reference to ID of ChartOfAccounts for this account (useful to get social objects and graphs for GL Accounts) This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The name of the AccountingChart An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The ID that is associated with an acitivity for the Project. cost pegged Project Element Identifies the Type of project that is being referenced. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Resource Allocations needed Resource Allocations needed Resource LabourAllocations needed Machine Allocations needed Operation Allocations needed Tool Allocations needed Identifies a source of supply, support, or aid, esp. one that can be readily drawn upon when needed. The incremental cost of the resource. Required quantity of this resource Duration required for this resource Total Cost for this resource Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. The ID assigned to a Resource. This is required for langauge codes other than 'en-us' when this field is used. A freeform note Represents the Properties or Features of the associated resource. This identifies the classifications of the resource. type of resource Property value Description of the property A freeform note Indicates the time period in which the associated component is effective. Sequence number This attribute contains the Code List ListID for the code that it is associated with. Resource Properties Name of the property Property type OA The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The classification codes that identify a single or hierarchical association of classifications. Describes the classification codes that identify a single or hierarchical association of classifications. Resource classification type Classification code code sequence This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Indicatates the cost or price. Amount is the monetary value. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Indicates the per quantity side of the above amount. Unit cost code Is the Unit Cost is effective The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ListID for the code that it is associated with. Unit Cost Codes The timestamp marking the beginning of a time period during which a related entity. The timestamp marking the ending 1of a time period during which a related entity. Unit of measure. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. Identifies the Item associated with the Line or Detail of a transaction. The item provides the details of the generic Item component information. The incremental cost of the resource. Required quantity of this resource Duration required for this resource Total Cost for this resource Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Electronic Product CodeLike the Universal Product Code (UPC) or bar code, the Electronic Product Code(EPC) is the fundamental identifier for a physical object in a EPC Network. The EPC identifies the manufacturer, product, version and serial number, and uses an extra set of digits to identify unique items. The EPC Tag Data Standards Specification Version 1.1 defines the encoding of the Electronic Product Code onto the RFID chip, as well as how it is encoded for use in the information systems layer of the EPC Network (for example the RFID Information Server). GTIN describes a family of GS1 (EAN.UCC) global data structures that employ 14 digits and can be encoded into various types of data carriers. Currently, GTIN is used exclusively within bar codes, but it could also be used in other data carriers such as radio frequency identification (RFID). The GTIN is only a term and does not impact any existing standards, nor does it place any additional requirements on scanning hardware. For North American companies, the UPC is an existing form of the GTIN. Following are the general variants of GTIN GTIN12 (also known as UPC-A) GTIN13 (also known as EAN/UCC 13) GTIN8 (also known as EAN 8) GTIN14 (also known as EAN/UCC14 and ITF14) Identifies if the Item is a Service. Describes the associated item. description by which each customer or supplier knows this item This identifies the classification of an entity. An entity may be classified into mulitple groups for different reasons. Examples of Classification include Commodity Codes, Freight Classifications, Product Line classifications and so on. Suggested Values are COMMODITY, FREIGHT, PRODUCTLINE. Identifies the specification of an entity. radio frequency identifier (RFID) Unique serial number assigned to the given item instance by the manufacturer. Is the Lot and Serial numbers for the items contained in the associated component by identifing the number of items and the uniques serial number of those items that belong to a given Lot. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. Valid values for the Item are Customer, Supplier, Manufacturer, SKU, and Duplicate. The ID of the entity that created the ID. When the schemeName is ""Customer"" or ""Supplier"" then this value is the ID of the customer or supplier. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. GTIN is one of the multiple GS1 ID keys used for items. When no schemeName is specified, the receiving application must try to identify the type of GTIN from the ID itself (like how it used to be when only a single GTIN could be specified in earlier versions). There could be multiple GTINs available in some cases; if there is a need to publish all these, then this attribute must be used. Valid values are GTIN-8 GTIN-12 GTIN-13 GTIN-14 Identifies the type of party: Customer, Supplier, or Manufacturer. ID of Party Accounting entity of Party This is required for language codes other than ""en-us"" when the element that includes this attribute is used. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Suggested Values are COMMODITY, FREIGHT, PRODUCTLINE The identifier for a specification. This does not point to another noun and does not use the accounting entity, location or lid attributes. Represents the Properties or Features of the associated entity A code used to indicate if this specification is used to define a minimum, maximum, or target value. An indicator used to identify Specifications that are likely not of interest to an ERP system. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties EngineeringReference' or 'DrawingNumber' Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is used to describe the quantity of an item. The quantity of the item in the Base UOM. Identifies the Lot that a given Item Instance belongs to. Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Unique serial number assigned to the given item instance by the manufacturer. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Any, Same, Specific Quantity of items required to fill the lot. Date when the item was manufactured Date when the item will expire. When this is not mentioned, it implies that there is no expiry date. Required when this measure is used The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Holds ID information associated with the Item's Lots. Indicates the time period in which the associated component is effective. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The auxiliary quantity related to the primary quantity on this transaction.e.g. where an item has an auxiliary quantity defined as a weight in KG, this would be the weight in KGs Unique serial number assigned to the given item instance by the manufacturer. radio frequency identifier (RFID) Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete ##Not supported. Please use CountryAndPercent element. Represents the identifier of the country of origin of an item, service or shipment Country of Origin information including a country code and a percentage.It is a collection with percentages and source and assembly. Many industries use standard country codes for Country of Origin. When there is a need to use custom codes (for example with Automotive), use element 'ComplexCountryOfOriginCode'. For example country of origin UC7M indicates at least 70% U.S. and Canadian content but assembled in Mexico. A code defined for a specific industry that indicates the countries of origin and percents in a single code. For example country of origin UC7M indicates at least 70% U.S. and Canadian content but assembled in Mexico. If standard country of origin codes are used, use the element 'CountryAndPercent' Characteristics that are tracked through out the warehouse and reported at the item instance level An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. These co Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. Required when this measure is used The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ListID for the code that it is associated with. Countries Country in which the Address exists. The list of values is specified in ISO 3166-2. The percentage of the item that comes from the specific country This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Indicates the type of inventory characteristic specified (eg. pack date time, size etc.) Used when the type depicts a characteristic of string data type Used when the characteristic is a date time value This attribute contains the Code List ID for the codes that are associated with corresponding entity. Element for the communication of all codes. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions This attribute contains the Code List ListID for the code that it is associated with. Disposition Codes The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Identifies the the Labour needed for the given work order. The incremental cost of the resource. Required quantity of this resource Duration required for this resource Total Cost for this resource Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. The Resource ID assigned associated to this Labour instance. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Represents the Properties or Features of the associated Labour. This identifies the classifications of the Labour. Is the position or designation of the employee within the given organization. Examples are Director, Software Engineer, Purchasing Manager, etc. A group simular or equivilant to job descriptions A text description of the employees responsibilities Provides a list of category codes that identify the capabilities of the employee. Qualifications of the employee Provides a list of skills that a employee has. Property value Description of the property A freeform note Indicates the time period in which the associated component is effective. Sequence number This attribute contains the Code List ListID for the code that it is associated with. Labour Properties The classification codes that identify a single or hierarchical association of classifications. Describes the classification codes that identify a single or hierarchical association of classifications. Labour classification type This is required for language codes other than 'en-us' when this field is used. This attribute contains the Code List ListID for the code that it is associated with. Job Codes This is required for language codes other than 'en-us' when this field is used. Element for the communication of all codes. This attribute contains the Code List ListID for the code that it is associated with. Labour Category Codes Qualification Code Date and time of qualification Description of the employee's qualification Note pertaining to qualification of the employee This attribute contains the Code List ListID for the code that it is associated with. Qualifications Type of description This is required for language codes other than 'en-us' when this field is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Author of the note Date and time of the note Status of the note Type of note This is required for language codes other than 'en-us' when this field is used. Code to help indentify skill Name describing the skill Inidicates the competency level Last date and time the employee used this skill Training date and times the employee has had training ffor a given skill Indicates the time period in which the associated component is effective. This attribute contains the Code List ListID for the code that it is associated with. Skills This attribute contains the Code List ListID for the code that it is associated with. Competencies The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. CHOICE: Choose Duration Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. end of CHOICE Unit of measure. Idenitifies a machine. The incremental cost of the Machine. Required quantity of this Machine Duration required for this Machine Total Cost for this Machine Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Identifies the resource ID that is associated with the Machine. This is required for langauge codes other than 'en-us' when this field is used. A freeform note Represents the Properties or Features of the associated Machine. This identifies the classifications of the Machine. Is the fixed asset code of the machine. Current status of the employee Property value Description of the property A freeform note Indicates the time period in which the associated component is effective. Sequence number This attribute contains the Code List ListID for the code that it is associated with. Machine Properties The classification codes that identify a single or hierarchical association of classifications. Describes the classification codes that identify a single or hierarchical association of classifications. Machine classification type Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. Effective date and time of the specified status Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ListID for the code that it is associated with. GenericStatus References the Operation noun. The incremental cost of the Machine. Required quantity of this Machine Duration required for this Machine Total Cost for this Machine Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Is the alternate document id for the associated document. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the step of the operation being reported. Indicates the type of step that the operations reference is. References to Items that have been consumed in manufacturing. References to output items in manufacturing. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Is the identifier of the given Line Component within the document Reference to the schedule of consumed items in manufacturing. Is the identifier of the given Line Component within the document Is the identifier of the given Line Component within the document Reference to the schedule of output items in manufacturing. Is the identifier of the given Line Component within the document Holds information associated with the allocation of a tool. The incremental cost of the Machine. Required quantity of this Machine Duration required for this Machine Total Cost for this Machine Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. The ID assigned to an associated Resource. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Represents the Properties or Features of the associated Tool. This identifies the classifications of the Tool. Property value Description of the property A freeform note Indicates the time period in which the associated component is effective. Sequence number This attribute contains the Code List ListID for the code that it is associated with. Tool Properties The classification codes that identify a single or hierarchical association of classifications. Describes the classification codes that identify a single or hierarchical association of classifications. Tool classification type Contains Actual information associated with the Actual Resources. Contains Inventory information associated with Actual Resources. Contains Labour information associated with Actual Resources. Contains Machine information associated with Actual Resources. Contains Operation information associated with Actual Resources. Contains Tool information associated with Actual Resources. Identifies a source of supply, support, or aid, esp. one that can be readily drawn upon when needed. The incremental cost of the resource. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The total cost of this project, as either an entered amount (no activity costing) or calculated as the sum of the activity costs. This field is updated by the LoadProjectAccounting BOD. The actual date when the cost is incurred Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. The ID assigned to a Resource. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note The monetary value of the object in which the amount is associated Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Indicates the PerQuantity side of this Amount. Typically, this value is 1 with a uom of each, meaning that, e.g., a UnitPrice with the Amount 1.29 would be the price per each or simply $1.29 each. For pricing wire, the UnitPrice Amount might be $7.00 with a PerQuantity of 100 and a uom of LinearFeet, meaning the unit price would be $7 per 100 linear feet. Element for the communication of all codes. The code for the currency associated with an amount. Identifies the Item associated with the Line or Detail of a transaction. The item provides the details of the generic Item component information. The incremental cost of the resource. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The total cost of this project, as either an entered amount (no activity costing) or calculated as the sum of the activity costs. This field is updated by the LoadProjectAccounting BOD. The actual date when the cost is incurred Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Electronic Product CodeLike the Universal Product Code (UPC) or bar code, the Electronic Product Code(EPC) is the fundamental identifier for a physical object in a EPC Network. The EPC identifies the manufacturer, product, version and serial number, and uses an extra set of digits to identify unique items. The EPC Tag Data Standards Specification Version 1.1 defines the encoding of the Electronic Product Code onto the RFID chip, as well as how it is encoded for use in the information systems layer of the EPC Network (for example the RFID Information Server). GTIN describes a family of GS1 (EAN.UCC) global data structures that employ 14 digits and can be encoded into various types of data carriers. Currently, GTIN is used exclusively within bar codes, but it could also be used in other data carriers such as radio frequency identification (RFID). The GTIN is only a term and does not impact any existing standards, nor does it place any additional requirements on scanning hardware. For North American companies, the UPC is an existing form of the GTIN. Following are the general variants of GTIN GTIN12 (also known as UPC-A) GTIN13 (also known as EAN/UCC 13) GTIN8 (also known as EAN 8) GTIN14 (also known as EAN/UCC14 and ITF14) Identifies if the Item is a Service. Describes the associated item. description by which each customer or supplier knows this item This identifies the classification of an entity. An entity may be classified into mulitple groups for different reasons. Examples of Classification include Commodity Codes, Freight Classifications, Product Line classifications and so on. Suggested Values are COMMODITY, FREIGHT, PRODUCTLINE. Identifies the specification of an entity. radio frequency identifier (RFID) Unique serial number assigned to the given item instance by the manufacturer. Is the Lot and Serial numbers for the items contained in the associated component by identifing the number of items and the uniques serial number of those items that belong to a given Lot. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. Valid values for the Item are Customer, Supplier, Manufacturer, SKU, and Duplicate. The ID of the entity that created the ID. When the schemeName is ""Customer"" or ""Supplier"" then this value is the ID of the customer or supplier. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The identifier for a specification. This does not point to another noun and does not use the accounting entity, location or lid attributes. Represents the Properties or Features of the associated entity A code used to indicate if this specification is used to define a minimum, maximum, or target value. An indicator used to identify Specifications that are likely not of interest to an ERP system. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. Is used to describe the quantity of an item. The quantity of the item in the Base UOM. Identifies the Lot that a given Item Instance belongs to. Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Unique serial number assigned to the given item instance by the manufacturer. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Identifies the method used for selecting the lot for an item. Standard values are ‘Any’, ‘Same’, or ‘Specific’ Quantity of items required to fill the lot. Date when the item was manufactured Date when the item will expire. When this is not mentioned, it implies that there is no expiry date. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Holds ID information associated with the Item's Lots. Indicates the time period in which the associated component is effective. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The auxiliary quantity related to the primary quantity on this transaction.e.g. where an item has an auxiliary quantity defined as a weight in KG, this would be the weight in KGs Unique serial number assigned to the given item instance by the manufacturer. radio frequency identifier (RFID) Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete ##Not supported. Please use CountryAndPercent element. Represents the identifier of the country of origin of an item, service or shipment Country of Origin information including a country code and a percentage.It is a collection with percentages and source and assembly. Many industries use standard country codes for Country of Origin. When there is a need to use custom codes (for example with Automotive), use element 'ComplexCountryOfOriginCode'. For example country of origin UC7M indicates at least 70% U.S. and Canadian content but assembled in Mexico. A code defined for a specific industry that indicates the countries of origin and percents in a single code. For example country of origin UC7M indicates at least 70% U.S. and Canadian content but assembled in Mexico. If standard country of origin codes are used, use the element 'CountryAndPercent' Characteristics that are tracked through out the warehouse and reported at the item instance level The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. Contains Labour information associated with LabourActual. The incremental cost of the resource. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The total cost of this project, as either an entered amount (no activity costing) or calculated as the sum of the activity costs. This field is updated by the LoadProjectAccounting BOD. The actual date when the cost is incurred Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Total amount of break time used by all Labour involved with the associated entity. In cases where BreakTimeDuratation occurs along with BreakTimePeriod. BreakTimeDuration is being depricated in favor of BreakTimePeriod. actual duration spent for doing the work. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. The Resource ID assigned associated to this Labour instance. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Provides the information on the skills of the associated component. Element for the communication of all codes. Identifies the Name of the object in which associated. Inidicates the competency level Idenitifies a machine. The incremental cost of the resource. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The total cost of this project, as either an entered amount (no activity costing) or calculated as the sum of the activity costs. This field is updated by the LoadProjectAccounting BOD. The actual date when the cost is incurred Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Total time that the associated entity or entities was down during the associated task or operation. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Identifies the resource ID that is associated with the Machine. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Represents the Properties or Features of the associated entity A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Is the fixed asset code of the machine. Indicates the current state of the associated object. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. References the Operation noun. The incremental cost of the resource. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The total cost of this project, as either an entered amount (no activity costing) or calculated as the sum of the activity costs. This field is updated by the LoadProjectAccounting BOD. The actual date when the cost is incurred Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Is the alternate document id for the associated document. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. References to Items that have been consumed in manufacturing. References to output items in manufacturing. Anything used as a means of accomplishing a task or purpose The incremental cost of the resource. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The total cost of this project, as either an entered amount (no activity costing) or calculated as the sum of the activity costs. This field is updated by the LoadProjectAccounting BOD. The actual date when the cost is incurred Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Total time that the associated entity or entities was down during the associated task or operation. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. The duration value the tool is actually used The ID assigned to an associated Resource. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Identifies a Hazard associated with a machine, location or any other entity and / or with performing an activity on any of the above entities. Hazard ID This is a grouping of the hazard id into different types. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Identifies the precautions to be taken to deal with the specific hazard. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. This attribute contains the Code List ListID for the code that it is associated with. Safety Hazard Types This identifies the precaution This is a grouping of the hazard id into different types. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note This attribute contains the Code List ListID for the code that it is associated with. Safety Hazard Precaution Types This identifies the problem that is reported on an asset, equipment, facility, or location This identifies the problem. This is a grouping of the Problem id into different types. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Idenfities a sign or indication of something that is associated with a problem. This identifies the causes that are associated with a cause. This identifies the remedies that are associated with a problem. This attribute contains the Code List ListID for the code that it is associated with. Failure Problem Types An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. This identifies the cause. This is a grouping of the cause id into different types. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note This attribute contains the Code List ListID for the code that it is associated with. Failure Problem Cause Types This identifies the remedy. This is a grouping of the remedy id into different types. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note This attribute contains the Code List ListID for the code that it is associated with. Failure Problem Remedy Types Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity. Use both ReasonCode(for ustatus code) and Reason(for description). Use both ReasonCode(for ustatus code) and Reason(for description). Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ListID for the code that it is associated with. Maintenance Order Status This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The ID assigned to an associated Resource. This is required for langauge codes other than 'en-us' when this field is used. A freeform note Represents the Properties or Features of the associated Machine. This identifies the classifications of the Machine. Is the fixed asset code of the machine. Current status of the employee Asset tag ID for this asset. Unique serial number assigned to the given asset by the manufacturer. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Property value Description of the property A freeform note Indicates the time period in which the associated component is effective. Sequence number This attribute contains the Code List ListID for the code that it is associated with. Physical Asset Properties Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. Effective date and time of the specified status Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The classification codes that identify a single or hierarchical association of classifications. Describes the classification codes that identify a single or hierarchical association of classifications. Department - which department is receiving the benefit of the work being done, CostCenter, MainenanceOrderClass, ServiceType "Contract, Warranty, NoCoverage, Internal, Capital", WorkType "PM, Breakdown, Calibration, Inspection, Standing", Criticality "User defined (or per RBHP metric). Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. The incremental cost of the resource. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note MaintenanceOrder Line number Describes the classification codes that identify a single or hierarchical association of classifications. A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. The Attachment represents binary data files that may be included within a BOD. These files replace the paper specifications and drawings attached to a BOD definition to clearly communicate design requirements. This Data Type is optional. Attachment usage is further defined by its position. Is the identifier of a specific operation. Possible examples of use are in the Manufacturing Routing or the Maintenance Order. or WorkINProcessOperation. See: EstimatedDuration The durartion of time remaining to carry out this maintenance order. Estimated and actual duration are available, but are based upon the logic of the system that created the work order. In other words it could be calendar, actual work, and linear work and it is up to these systems to ensure that the measure is consistent across the implementation. Flag to indicate that this line.activity is locked to defer an activity to a later date. Date and time this maintenance order line was competed. Includes information regarding the meter reading (eg., MeterID, Recorded Measure, Date/Time of the reading, etc..) Identifies the safety related information associated with a machine, location or anyother entity or with performing an activity on any of the above entities. Information on the problem, possible symptoms that may lead to the problem, and cause and remedy for the problem. Causes and /or remedies could be reported against a failure in a multi-level hierarchical reporting. For example, failure analysis could be record as follows; for failure A , causes P and Q are the factors and remedies X, Y and Z are to be taken. Identifies how monetary amounts are distributed across an organization. The position of the Distribution within a Business Object Document provides the context and additional meaning. This Identifies resources that are required to perform the maintenance operation. This is for a high level estimate This Identifies resources that are required to perform the maintenance operation. This is for a high level estimate Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Date time this maintenance order line is scheduled to take place. Estimated date and time this maintenance order line is to be completed. Actual date and time the work on this maintenace order line to place. Indicates if this work is classified as warranty work. Skill code for signoff on this maintenance order line. Refence to person responsible for sign off of this maintenance order line operation. Date and time when sign off was complete. Number of inventory items that have been shipped Qualifications of the maintenance order line Is the primary document id for the document associated. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Is the identifier of the given Line Component within the document A Facility identifies a location within an entity. The facility may have sub-locators identified using a sequenced identification notation e.g. Warehouse A100 Sub-Location 11, Row R10 would be represented as an array of three Facility elements with values as A100, 11, R10, name attribute as Warehouse, Sub-Location and Row and sequence attribute as 1,2 and 3 respectively. Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. The Name of the noun that is being referenced. This can reference any other noun that is relevant to this transaction such as SalesOrder, ProductionOrder, or Transfer Identifies the engineering change revision that this entity addresses. This can reference any other noun that is relevant to this transaction such as SalesOrder, ProductionOrder, or Transfer The name of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this product The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The OperationID/ID references the Operation noun which we aren’t currently publishing. Identifies the engineering change revision that this entity addresses. This is the identifier of the maintenance operation. This can reference any other noun that is relevant to this transaction such as SalesOrder, ProductionOrder, or Transfer Identifies the meter that was measured. Identifies the value recorded for the meter at a specific point of time Is the timestamp in which the measurement was recorded Identifies the person that carried out the measurement. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Identifies a Hazard associated with a machine, location or any other entity and / or with performing an activity on any of the above entities. Hazard ID This is a grouping of the hazard id into different types. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Identifies the precautions to be taken to deal with the specific hazard. This identifies the problem that is reported on an asset, equipment, facility, or location An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. This is a grouping of the Problem id into different types. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Idenfities a sign or indication of something that is associated with a problem. This identifies the causes that are associated with a cause. This identifies the remedies that are associated with a problem. Resource Allocations needed Resource Allocations needed Resource LabourAllocations needed Machine Allocations needed Operation Allocations needed Tool Allocations needed Identifies the Item associated with the Line or Detail of a transaction. The item provides the details of the generic Item component information. The incremental cost of the resource. Required quantity of this resource Duration required for this resource Total Cost for this resource Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Electronic Product CodeLike the Universal Product Code (UPC) or bar code, the Electronic Product Code(EPC) is the fundamental identifier for a physical object in a EPC Network. The EPC identifies the manufacturer, product, version and serial number, and uses an extra set of digits to identify unique items. The EPC Tag Data Standards Specification Version 1.1 defines the encoding of the Electronic Product Code onto the RFID chip, as well as how it is encoded for use in the information systems layer of the EPC Network (for example the RFID Information Server). GTIN describes a family of GS1 (EAN.UCC) global data structures that employ 14 digits and can be encoded into various types of data carriers. Currently, GTIN is used exclusively within bar codes, but it could also be used in other data carriers such as radio frequency identification (RFID). The GTIN is only a term and does not impact any existing standards, nor does it place any additional requirements on scanning hardware. For North American companies, the UPC is an existing form of the GTIN. Following are the general variants of GTIN GTIN12 (also known as UPC-A) GTIN13 (also known as EAN/UCC 13) GTIN8 (also known as EAN 8) GTIN14 (also known as EAN/UCC14 and ITF14) Identifies if the Item is a Service. Describes the associated item. description by which each customer or supplier knows this item This identifies the classification of an entity. An entity may be classified into mulitple groups for different reasons. Examples of Classification include Commodity Codes, Freight Classifications, Product Line classifications and so on. Suggested Values are COMMODITY, FREIGHT, PRODUCTLINE. Identifies the specification of an entity. radio frequency identifier (RFID) Unique serial number assigned to the given item instance by the manufacturer. Is the Lot and Serial numbers for the items contained in the associated component by identifing the number of items and the uniques serial number of those items that belong to a given Lot. Contains Actual information associated with the Actual Resources. Contains Inventory information associated with Actual Resources. Contains Labour information associated with Actual Resources. Contains Machine information associated with Actual Resources. Contains Operation information associated with Actual Resources. Contains Tool information associated with Actual Resources. Identifies the Item associated with the Line or Detail of a transaction. The item provides the details of the generic Item component information. The incremental cost of the resource. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The total cost of this project, as either an entered amount (no activity costing) or calculated as the sum of the activity costs. This field is updated by the LoadProjectAccounting BOD. The actual date when the cost is incurred Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note The required quantity of items The period of time the resource is required. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that are associated with corresponding entity. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. Id of person(s) resposible for signoff The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Qualification Code Description of the qualification A freeform note Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Indicates what type of note is being specified and is associated to an Infor defined code list, ''Note Types,'' This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it.