A container that holds a list of IDs without RevisionID. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. The datetime on which the object was last modified. A reference tot he person that took the action that caused this BOD to be published. The date and time when this document was created. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Defines the items that is associated with the inventory hold. Is the storage facility for inventory. The datetime of occurence of the transaction Inventory Hold Codes - this is the set of hold codes that define the hold status of the inventory quantity This is the quantity that is moving between the from hold code collection to the from hold code collection. The held auxiliary quantity on this transaction. e.g. where an item has an auxiliary quantity defined as a weight in KG, this would be the weight in KGs The sequence number assigned to the last time this item was counted and reported on the bus. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Indicates the current state of the associated object. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Valid value is: System when this attribute exists The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Indicates what type of note is being specified and is associated to an Infor defined code list, ''Note Types,'' This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Electronic Product CodeLike the Universal Product Code (UPC) or bar code, the Electronic Product Code(EPC) is the fundamental identifier for a physical object in a EPC Network. The EPC identifies the manufacturer, product, version and serial number, and uses an extra set of digits to identify unique items. The EPC Tag Data Standards Specification Version 1.1 defines the encoding of the Electronic Product Code onto the RFID chip, as well as how it is encoded for use in the information systems layer of the EPC Network (for example the RFID Information Server). GTIN describes a family of GS1 (EAN.UCC) global data structures that employ 14 digits and can be encoded into various types of data carriers. Currently, GTIN is used exclusively within bar codes, but it could also be used in other data carriers such as radio frequency identification (RFID). The GTIN is only a term and does not impact any existing standards, nor does it place any additional requirements on scanning hardware. For North American companies, the UPC is an existing form of the GTIN. Following are the general variants of GTIN GTIN12 (also known as UPC-A) GTIN13 (also known as EAN/UCC 13) GTIN8 (also known as EAN 8) GTIN14 (also known as EAN/UCC14 and ITF14) Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note description by which each customer or supplier knows this item Identifies the specification of an entity. radio frequency identifier (RFID) Unique serial number assigned to the given item instance Is the Lot and Serial numbers for the items contained in the associated component by identifing the number of items and the uniques serial number of those items that belong to a given Lot. The set of hold codes that define the hold status of the inventory quantity prior to this change. Characteristics that are tracked through out the warehouse and reported at the item instance level An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. See ItemMaster noun for a list of options. The ID of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this item, in the case where the ID is from another system, this is the LogicalID of that system. The name of the entity that created the ID. This is only used when the ID is defined externally and there is no ID for that agency - like for government agencies. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. GTIN is one of the multiple GS1 ID keys used for items. When no schemeName is specified, the receiving application must try to identify the type of GTIN from the ID itself (like how it used to be when only a single GTIN could be specified in earlier versions). There could be multiple GTINs available in some cases; if there is a need to publish all these, then this attribute must be used. Valid values are GTIN-8 GTIN-12 GTIN-13 GTIN-14 This is required for langauge codes other than 'en-us' when this field is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Indicates what type of note is being specified and is associated to an Infor defined code list, ''Note Types,'' This is required for langauge codes other than 'en-us' when this field is used. Identifies the type of party: Customer, Supplier, or Manufacturer. ID of Party Accounting entity of Party This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The identifier for a specification. This does not point to another noun and does not use the accounting entity, location or lid attributes. Represents the Properties or Features of the associated entity A code used to indicate if this specification is used to define a minimum, maximum, or target value. An indicator used to identify Specifications that are likely not of interest to an ERP system. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties EngineeringReference' or 'DrawingNumber' Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Identifies the quantity of an item. The quantity of the item in the Base UOM. Identifies the Lot that a given Item Instance belongs to. Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Unique serial number assigned to the given item instance by the manufacturer. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Any, Same, Specific Date when the item was manufactured Date when the item will expire. When this is not mentioned, it implies that there is no expiry date. Required when this measure is used The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Holds ID information associated with the Item's Lots. Indicates the time period in which the associated component is effective. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The auxiliary quantity related to the primary quantity on this transaction.e.g. where an item has an auxiliary quantity defined as a weight in KG, this would be the weight in KGs Unique serial number assigned to the given item instance by the manufacturer. radio frequency identifier (RFID) A freeform note Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete ##Not supported. Please use CountryAndPercent element. Represents the identifier of the country of origin of an item, service or shipment Country of Origin information including a country code and a percentage.It is a collection with percentages and source and assembly. Many industries use standard country codes for Country of Origin. When there is a need to use custom codes (for example with Automotive), use element 'ComplexCountryOfOriginCode'. For example country of origin UC7M indicates at least 70% U.S. and Canadian content but assembled in Mexico. A code defined for a specific industry that indicates the countries of origin and percents in a single code. For example country of origin UC7M indicates at least 70% U.S. and Canadian content but assembled in Mexico. If standard country of origin codes are used, use the element 'CountryAndPercent' Characteristics that are tracked through out the warehouse and reported at the item instance level An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. These co Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. Required when this measure is used The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ListID for the code that it is associated with. Countries Country in which the Address exists. The list of values is specified in ISO 3166-2. The percentage of the item that comes from the specific country This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Element for the communication of all codes. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions This attribute contains the Code List ListID for the code that it is associated with. Disposition Codes The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Element for the communication of all codes. This attribute contains the Code List ListID for the code that it is associated with. Hold Reason Codes The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Indicates the type of inventory characteristic specified (eg. pack date time, size etc.) Used when the type depicts a characteristic of string data type Used when the characteristic is a date time value This attribute contains the Code List ID for the codes that are associated with corresponding entity. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Element for the communication of all codes. Hold Reason Codes The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Required when this measure is used The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Indicates what type of note is being specified and is associated to an Infor defined code list, ''Note Types,'' This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it.