Header for timesheet; specifies times reported for a given period of time. Line information - Time details for a specific date. Is the primary document id for the document associated. Is the alternate document id for the associated document. The datetime on which the object was last modified. A reference tot he person that took the action that caused this BOD to be published. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Indicates the current state of the associated object. Details about the period for which the time sheet is for Employee information Reference to a Person Noun ScheduleType is a code or identifier that describes the specific schedule and can be used in a variety of contexts. ScheduleType refers to the specific schedule for the employee or worker. Location where work is assigned or reported to be performed. Pay codes related to billable rates, maintained in the ERP. Total duration for the time sheet. Generally, the duration will be mentioned in hours/minutes. This is the sum of regular hours and sum of all the actual type overtime hours. Example - 4.5 hours must be mentioned as PT4H30M Non overtime hours for the time sheet period Specifies the details of different types of overtime and the corresponding duration (hours) Specifies the total time off duration for the period The data and time (optional) when this object was created. Is the date on which the document is submitted. Is the date in which the document is approved. Identifies the cost center involved. A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Indicates what type of note is being specified and is associated to an Infor defined code list, ''Note Types,'' This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Is the primary document id for the document associated. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Is the identifier of the given Line Component within the document A Facility identifies a location within an entity. The facility may have sub-locators identified using a sequenced identification notation e.g. Warehouse A100 Sub-Location 11, Row R10 would be represented as an array of three Facility elements with values as A100, 11, R10, name attribute as Warehouse, Sub-Location and Row and sequence attribute as 1,2 and 3 respectively. Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The timestamp marking the beginning of a time period during which a related entity. The timestamp marking the ending of a time period during which a related entity. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Is the title of the person. For example Dr.. Way the person is addressed e.g. Honorable etc? This is the Person""s given name or first name. A name added to or substituted for the proper name of the person. This is the person""s middle name. This is the person""s family name. A woman""s family name before she is married. Used of a surname that is replaced by a woman when she marries. Also called birth name. This follows a person’s full name and provides additional information about the person. Post-nominal letters indicate that the individual holds a position, educational degree, accreditation, office or honour. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A code indicating the sex of the individual (Male, Female, Unknown, Other, NotSpecified) A code indicating the martial status of the individual in which it is associated. Is the date and time that an individual was born. Is the date and time that an individual died. Languages used by the employee. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Identifies the position or designation of the pesron with whom associated within the given organization. Examples are Director, Software Engineer, Purchasing Manager etc A group simular or equivilant to job descriptions A text description of the responsibility of the associated entity. Provides a list of category codes that identify the capabilities and features of the associated object. Represents the response to selection criteria that will be used to evaluate the Party. It may also represent capabilities the party offers which are not requested. Examples include quality certifications (ISO-9000), CAD data compatibility (Pro/E), manufacturing operations (JIT), company size, and performance ratings. Provides the information on the skills of the associated component. Indicates the current state of the associated object. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ListID for the code that it is associated with. Genders This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ListID for the code that it is associated with. Marital Status This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. ## Not supported. This attribute contains the Code List ListID for the code that it is associated with. ## Not supported. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. Holds the lines that make up the address. The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. The building or house name on the street that identifies the location. The street name of the building or house that identifies the location. The unit of the building or house that identifies the location. The floor of the building or house that identifies the location. The post office box that is used for the location. Qualifies the further division of the City, example a city may have many districts or Boroughs. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. This attribute contains the Code List ListID for the code that it is associated with. Address Format Codes The sequence number of this address line. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Channel Code This attribute contains the Code List ListID for the code that it is associated with. Communication Use Codes Holds the lines that make up the address. The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. The building or house name on the street that identifies the location. The street name of the building or house that identifies the location. The unit of the building or house that identifies the location. The floor of the building or house that identifies the location. The post office box that is used for the location. Qualifies the further division of the City, example a city may have many districts or Boroughs. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. The numeric ranking of this element in a collection of like elements where 1 is the preferred option. Indicates that this element is the prefered element in a collection of like elements. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ListID for the code that it is associated with. Job Codes This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Element for the communication of all codes. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Identifies the Name of the object in which associated. Inidicates the competency level This attribute contains the Code List ListID for the code that it is associated with. Competencies The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ListID for the code that it is associated with. GenericStatus A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. This attribute contains the Code List ListID for the code that it is associated with. Schedule Types This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions This attribute contains the Code List ID for the codes that are associated with corresponding entity. Specifies various categories of overtime - general, double time, triple time etc. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Specifies the type of overtime (Planned/Pre-approved, Actual, External) Specifies various categories of overtime - general, double time, triple time etc. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type associated with this group of classifications. Element for the communication of all codes. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Is the identifier of the given Line Component within the document Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Indicates the current state of the associated object. Date for which the time sheet line is being entered. Start work time for the day (first in time for the line date) End work time for the day (final out time for line date) Details of time logged on various tasks for a line date Non overtime hours for the time sheet line Specifies the details of different types of overtime and the corresponding duration (hours) Specifies the total time off duration for the period Specifies the various in and out times on the line date - requirement in some countries for legal reporting Identifies the cost center involved. A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Reference to a ProjectMaster noun Location where work is assigned or reported to be performed. Identifies the cost center involved. Specifies the actual task in the project for which the hours are logged Indicates whether the current task is billable or not Specific pay code for the task. Specifies the billable rate details; used in the absence of a TaskPayRateCode The role of the task for which the current pay rate (code) is applicable. E.g. Project Manager, Consultant, Support. Generally used for reporting purposes. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The type of hours that are being entered - regular, double time, travel time etc. Depending on the type, the sum of these would be available at TimesheetLine/RegularDuration or TimesheetLine/OverTime (with appropriate category) or TimesheetLine/TimeOffDuration Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Approved hours - is this the sum of regular hours and overtime and time off? Reference to the information identifying the person who has the role of approver. A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The ID that is associated with an acitivity for the Project. cost pegged Project Element Identifies the Type of project that is being referenced. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The monetary value of the object in which the amount is associated Indicates the PerDuration side of this Amount. Typically, this value is 1 hour (PT1H), meaning that, e.g., a TaskPayRate with the Amount 50.5 USD would be the rate per hour or simply $50.5 per hour. For complex rates, the PayRate Amount might be $500.00 with a PerDuration of P1D, meaning the task pay rate would be $500 per day. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. In time on line date Out time Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Indicates what type of note is being specified and is associated to an Infor defined code list, ''Note Types,'' This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it.