Provides general information about the ServiceConsumption receipt document that is used to receive a specific quantity of material goods from a supplier. Provides general information about the item inventory being delivered, including the requested and actual quantities. This information usually directly references a line item or Delivery schedule line on a sales order, purchase order or other inventory transfer document. Is the primary document id for the document associated. Is the alternate document id for the associated document. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. The datetime on which the object was last modified. A reference tot he person that took the action that caused this BOD to be published. The date and time when this document was created. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. The Attachment represents binary data files that may be included within a BOD. These files replace the paper specifications and drawings attached to a BOD definition to clearly communicate design requirements. This Data Type is optional. Attachment usage is further defined by its position. Indicates the current state of the associated object. This contains the quantity of units or things shipped. This represents the container(s), not the product shipped. An example of this is "4 truck loads" or "2 wooden crates" Is the storage facility for inventory. Points to the information associated with the CarrierRoute noun. Inidicates the shipping date and time of the line item. The scheduled delivery date provided by the supplier. Is the actual delivery date and time of the line item. The estimated weight of an item or object. This is the net weight at loading time of a container in which the materials are being shipped. The Tare weight is the weight of the packaging when empty (in the case of a pallet the weight of the empty pallet) that when subtracted from the Gross weight results in the Net weight. The net weight is calculated by subtracting the tare weight or the weight of the container from the GrossWeight. The total weight of the entity without reduction of packaging or container. I.e The Gross wieght of a pallet of goods includes the weight of the pallet. Quantifies the volume, or amount of space, that is occupied by an item, container or shipment. Provides the hazardous material codes that are associated with the given instance of the item. ##Not supported. Please use CountryAndPercent element. Represents the identifier of the country of origin of an item, service or shipment Indicates the DistributionCenter that the Seller will ship the items from. Identifies the general type of carrier transportation used to deliver goods. (Examples, Truckload, Parcel, Less than Truckload, Rail, Ocean, Air) This describes any special, physical handling needs that the freight might have. For example, the need for a lift gate Idenitifies the loading dock that the associate entity is to be taken. Identifies the party that the goods or services are being shipped or sent from. Idenitfies the party that serves as the carrier of the goods or services for the transaction. Describes how the freight cost for a shipment of goods should be billed. EXAMPLES: Prepaid, Collect,Third Party, Prepaid and Add, Consignee Billed. Check the associated code list for the values. A generic Party for non-validated or application-validated parties. A work-around for situations where Schema-validation of Parties is not feasible or not desired. Identifies an adjustment that is made up of either a charge or discount that is associated with the item. This indicates the receiving service charge associated with the receiving document either as a whole, or at line level dpending on usage date and time this document becomes effective The date and time that the associated object was received. This is the Party (the person or organization) to receive delivery of a the associated entitys. This can be goods, services, cheques, etc. Several examples of the value of this field include an office number, a complete address, or a person. This identifies a physical or logical point of receipt within a receiving organization Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. This is the receiver number Identifies the engineering change revision that this entity addresses. This can reference any other noun that is relevant to this transaction such as SalesOrder, ProductionOrder, or Transfer The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for langauge codes other than 'en-us' when this field is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Indicates what type of note is being specified and is associated to an Infor defined code list, ''Note Types,'' This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Is the primary document id for the document associated. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Is the identifier of the given Line Component within the document A Facility identifies a location within an entity. The facility may have sub-locators identified using a sequenced identification notation e.g. Warehouse A100 Sub-Location 11, Row R10 would be represented as an array of three Facility elements with values as A100, 11, R10, name attribute as Warehouse, Sub-Location and Row and sequence attribute as 1,2 and 3 respectively. Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. The Name of the noun that is being referenced. The primary ID for the referenced document. The secondary ID for this document. Can be used to track releases against a sales order, or more specific information about an item. The instance of the document identified by the ID and revision. The source of the referenced document. These match to noun names such as AdvanceShipNotice, ProductionOrder, or Transfer. The name of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this product The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates the name of the File being referenced. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type of the file type of the attachment. Specifies how big the file is. Is the title of the person. For example Dr.. When this attribute is true the attachment is stored in the EmbeddedSata element. When it is false an external reference is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ListID for the code that it is associated with. GenericStatus This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. This describes a purpose or orientation toward a goal that serves to guide or motivate. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type of Warehouse Location that is being used. This always refers to a Location BOD. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This is required for langauge codes other than 'en-us' when this field is used. This is required for langauge codes other than 'en-us' when this field is used. The name of the person to whom this document would be intended. Holds the lines that make up the address. The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. The building or house name on the street that identifies the location. The street name of the building or house that identifies the location. The unit of the building or house that identifies the location. The floor of the building or house that identifies the location. The post office box that is used for the location. Qualifies the further division of the City, example a city may have many districts or Boroughs. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The sequence number of this address line. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Master consignment number, also called as master bill of lading (MBOL). A consignment related number defined by the supplier which groups multiple consignments to one master consignment. Note - the MBOL as given by the carrier is specified with TrackingID. This element represents the MBOL number by the shipper (or in a few cases, the customer, with CustomerID) An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The ID of the entity that created the ID. When the schemeName is ""Customer"" or ""Supplier"" then this value is the ID of the customer or supplier. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The ID of the entity that created the ID. When the schemeName is ""Customer"" or ""Supplier"" then this value is the ID of the customer or supplier. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Hazardous material code This attribute contains the Code List ListID for the code that it is associated with. Hazardous Material Codes The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ListID for the code that it is associated with distribution centers. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This attribute contains the Code List ListID for the code that it is associated with. Transportation Methods Person who created the note Date and Time stamp of when the note was created. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. An identifier for an object. The ID has a number of possible attributes to further define how it should be used..For details on ID use, see Party section : http://wiki.infor.com:8080/confluence/display/Message/Common Message Elements. Tax Identification Number of the party - Identifier for a business or individual provided by the government. This maybe a FIIN, Social Security Number, or Drivers License Number to name a few. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The name of the entity that created the ID. This is only used when the ID is defined externally and there is no ID for that agency - like for government agencies. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Identifier of the given location within the scope of the integration. For details on ID use, see Party section : http://wiki.infor.com:8080/confluence/display/Message/Common Message Elements. Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. Used to indicate if a location is not a physical internal warehouse, but rather one used for tracking direct shipments. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. The building or house name on the street that identifies the location. The street name of the building or house that identifies the location. The unit of the building or house that identifies the location. The floor of the building or house that identifies the location. The post office box that is used for the location. The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. The sequence number of an address. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The numeric ranking of this element in a collection of like elements where 1 is the preferred option. Indicates that this element is the prefered element in a collection of like elements. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Channel Code This attribute contains the Code List ListID for the code that it is associated with. Communication Use Codes Holds the lines that make up the address. The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. The building or house name on the street that identifies the location. The street name of the building or house that identifies the location. The unit of the building or house that identifies the location. The floor of the building or house that identifies the location. The post office box that is used for the location. Qualifies the further division of the City, example a city may have many districts or Boroughs. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Contact. Identifies the means of communicating with this contact. Each instance can represent an address, email address, web site or phone number. Identifies the type of contact, such as requester, the buyer, customer service, etc Code that identifies the prefered language of the contact. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Contains the set of possible identifiers for an associated Party. This always references the CarrierPartyMaster Noun. Transportation will expect an ID if the carrier is pre-selected. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. This is intended to be used as an override for contact information that is stored in the ContactMaster. Standard Carrier Alpha Code - a unique two-to-four-letter code used to identify transportation companies. An identifier for an object. The ID has a number of possible attributes to further define how it should be used..For details on ID use, see Party section : http://wiki.infor.com:8080/confluence/display/Message/Common Message Elements. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Tax Identification Number of the party - Identifier for a business or individual provided by the government. This maybe a FIIN, Social Security Number, or Drivers License Number to name a few. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. Identifies the Name of the Location Address for the given location Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. Used to indicate if a location is not a physical internal warehouse, but rather one used for tracking direct shipments. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. The building or house name on the street that identifies the location. The street name of the building or house that identifies the location. The unit of the building or house that identifies the location. The floor of the building or house that identifies the location. The post office box that is used for the location. Vanity city name like La Jolla for San Diego The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. This attribute contains the Code List ListID for the code that it is associated with. Address Format Codes An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Contact. Identifies the means of communicating with this contact. Each instance can represent an address, email address, web site or phone number. Holds preference information for the instance of the object being referenced. Identifies the type of contact, such as requester, the buyer, customer service, etc Code that identifies the prefered language of the contact. This attribute contains the Code List ListID for the code that it is associated with. Freight Terms Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Identifies the Role that the generic party is associated with. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the party - Identifier for a business or individual provided by the government. This maybe a FIIN, Social Security Number, or Drivers License Number to name a few. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. Identifier of the given location within the scope of the integration. For details on ID use, see Party section : http://wiki.infor.com:8080/confluence/display/Message/Common Message Elements. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. Classification of the location in one or more of the groups defined below Used to indicate if a location is not a physical internal warehouse, but rather one used for tracking direct shipments. Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type of Classification of the Location. The code value for the dimension identified in the code list. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This is the name of one of Dimensions that are maintained by the Code Fortress. These can be user defined or provided by Infor. Known dimensions that will be available on all systems and should be mapped to by implementing systems include: Department The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ListID for the code that it is associated with. GenericStatus An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Is the base amount from which the charge/allowance is derived. Is the base quantity from which the charge/allowance is derived. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The monetary value of the object in which the amount is associated Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Allows the sender to indicate how the Charge/Allowance was calculated. Identifies the reason for an activity Identifies the exchange rate between two currencies Identifies the Name of the object in which associated. Indicates the tax for the object associated. The basis amount for each quantity of 1 of the unit of measure. The amount of the adjustment for each quantity of 1 of the unit of measure. A code used to identify the purpose of an adjustment. Could include codes for non-itemized and pre-tax. A code used group charges or allowances together to simplify posting for those systems that cannot or do not support a full range of adjustments. Identifies how the object being referenced is to be calculated. This is the unit of measure code that is assigned to this package. This must be unique within the item/supplier. Specifies the currency rate of the object in which it is associated. Used by pricing to indicate that the calculation is based on the gross weight rather than the net weight. Identifies the Type of distribution charge that is associated with the component. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This is required for langauge codes other than 'en-us' when this field is used. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. Is the multiplier appied to the base amount or the base quantity in order to calculate the amount. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The source Currency Code for the monetary amount to be converted. Specifies the unit base of the source currency for currencies with small denominations. The target Currency Code for the monetary amount to be converted. Specifies the unit base of the target currency for currencies with small denominations. Is the multiplier appied to the base amount or the base quantity in order to calculate the amount. Identifies the date in which the conversion factor was set by the Issueing agency. Points to the source that is associated with the exchange rate. Indicates the time period in which the associated component is effective. This attribute contains the Code List ListID for the code that it is associated with. Currencies This attribute contains the Code List ListID for the code that it is associated with. Currencies The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Defines the tax authority to which taxes must be paid. The determining location is the location to which the asset was delivered. The taxable amount for this tax jurisdiction expressed in the transaction currency. The taxable amount for this tax jurisdiction expressed in the base currency. The taxable amount for this tax jurisdiction expressed in the report currency. The quantity used for calculating the tax in the transaction unit of measure. The quantity used for calculating the tax in the base unit of measure. Allows the sender to indicate how the Charge/Allowance was calculated. Uniquely identifies the exemption along with the agency that defines the excemption. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note This is used to represent the tax amount for this jurisdiction in the currency of the taxing authority. Same as Tax/BaseAmount; either this element or Tax/BaseAmount could be used. The amount of tax payable on this transaction for this jurisdiction expressed in the transaction currency. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Identifies the sequence of how the taxes must be applied. Indicates that tax code of the tax being represented by the given instance of tax. Possible values are: Sales Tax, Use Tax, VAT To further classify type; for example for VAT, the following categories could be applicable - Higher Rate, Lower Rate, Zero rate etc When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Element for the communication of all codes. This attribute contains the Code List ListID for the code that it is associated with. Tax Jurisdiction Codes The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Is the multiplier appied to the base amount or the base quantity in order to calculate the amount. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Exemption Code Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note The amount of this transaction that is exempt from tax by this jurisdiction expressed in the transaction currency. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. This attribute contains the Code List ListID for the code that it is associated with. Adjustment Types This attribute contains the Code List ListID for the code that it is associated with. Adjustment Groups The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This attribute contains the Code List ListID for the code that it is associated with. Calculation Methods This attribute contains the Code List ListID for the code that it is associated with. Rate Types This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Identifier of the given location within the scope of the integration. For details on ID use, see Party section : http://wiki.infor.com:8080/confluence/display/Message/Common Message Elements. Identifies the Name of the Location Directions for the given location Identifies the coordinates of the given location. Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. Classification of the location in one or more of the groups defined below Timezone of the given location true when this location is a valid pick-up location for the web storefront. Used to indicate if a location is not a physical internal warehouse, but rather one used for tracking direct shipments. Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. This is required for langauge codes other than 'en-us' when this field is used. Latitude of the given location Longitude of the given location Is the value and unit of measure in the z-axis in a three dimensional system. Examples of this maybe the Altitude in the case of a map of the world, or the height or shelf in a rack system in the case of a manufacturing or warehouse facility. Unit code is not required for this measure element since it is already expressed in the name of the element. Unit code is not required for this measure element since it is already expressed in the name of the element. Unit code is not required for this measure element since it is already expressed in the name of the element. Valid values are: North or South The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ListID for the code that it is associated with. Latitude Directions Unit code is not required for this measure element since it is already expressed in the name of the element. Unit code is not required for this measure element since it is already expressed in the name of the element. Unit code is not required for this measure element since it is already expressed in the name of the element. Valid values are: East or West This attribute contains the Code List ListID for the code that it is associated with. Longitude Directions The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. The building or house name on the street that identifies the location. The street name of the building or house that identifies the location. The unit of the building or house that identifies the location. The floor of the building or house that identifies the location. The post office box that is used for the location. Vanity city name like La Jolla for San Diego The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is offset from UTC time in decimal hours Daylight savings time start date Includes a break down of the DaylightStartDate (e.g., month, week, day). Daylight savings time end date Includes a break down of the DaylightEndDate (e.g., month, week, day). Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the month (eq., Jan, Feb, Mar, etc..) for the given date. Indentifies the week number (1 - 52) for the given date. Identifies the day (eq., Monday, Tuesday, Wednesday, etc...) for the given date. This attribute contains the Code List ListID for the code that it is associated with. Days of the Week Identifies the month (eq., Jan, Feb, Mar, etc..) for the given date. Indentifies the week number (1 - 52) for the given date. Identifies the day (eq., Monday, Tuesday, Wednesday, etc...) for the given date. Description of the given timezone An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Contact. Identifies the means of communicating with this contact. Each instance can represent an address, email address, web site or phone number. Identifies the type of contact, such as requester, the buyer, customer service, etc Code that identifies the prefered language of the contact. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Email address Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. This describes a purpose or orientation toward a goal that serves to guide or motivate. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the current state of the associated object. Identifies the Type of location that is used for receiving the items. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. The name of the person to whom this document would be intended. Holds the lines that make up the address. The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. The building or house name on the street that identifies the location. The street name of the building or house that identifies the location. The unit of the building or house that identifies the location. The floor of the building or house that identifies the location. The post office box that is used for the location. Qualifies the further division of the City, example a city may have many districts or Boroughs. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. OA OA OA The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. Is the identifier provided by the customer for the item. Is the identifier provided by Manufacturer for the Item. One example may be the model number. Is the identifier provided by the supplier for the item. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Electronic Product CodeLike the Universal Product Code (UPC) or bar code, the Electronic Product Code(EPC) is the fundamental identifier for a physical object in a EPC Network. The EPC identifies the manufacturer, product, version and serial number, and uses an extra set of digits to identify unique items. The EPC Tag Data Standards Specification Version 1.1 defines the encoding of the Electronic Product Code onto the RFID chip, as well as how it is encoded for use in the information systems layer of the EPC Network (for example the RFID Information Server). GTIN describes a family of GS1 (EAN.UCC) global data structures that employ 14 digits and can be encoded into various types of data carriers. Currently, GTIN is used exclusively within bar codes, but it could also be used in other data carriers such as radio frequency identification (RFID). The GTIN is only a term and does not impact any existing standards, nor does it place any additional requirements on scanning hardware. For North American companies, the UPC is an existing form of the GTIN. Following are the general variants of GTIN GTIN12 (also known as UPC-A) GTIN13 (also known as EAN/UCC 13) GTIN8 (also known as EAN 8) GTIN14 (also known as EAN/UCC14 and ITF14) Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note description by which each customer or supplier knows this item A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Identifies the specification of an entity. Complex element that contains information about the hazardous material ratings of the item(s). Identifies the Packaging information for a given item. Note: The UPC here is the UPC of the packaging for a given item. radio frequency identifier (RFID) Unique serial number assigned to the given item instance by the manufacturer. ## Not Supported. Use ServiceConsumptionItem/SerializedLot instead of this element. This can be used in three ways: specify multiple serial numbers for a given lot, or specify multiple lots without serial numbers, or specify multiple serial numbers without a LotID. Typically, the parent element that uses LotSerial also provides the ability to provide a single lot number and serial number pair, which can be used for the cases where there are no multiple lots or serial numbers involved. Characteristics that are tracked through out the warehouse and reported at the item instance level ##Not supported. Please use CountryAndPercent element. Represents the identifier of the country of origin of an item, service or shipment Country of Origin information including a country code and a percentage.It is a collection with percentages and source and assembly. Many industries use standard country codes for Country of Origin. When there is a need to use custom codes (for example with Automotive), use element 'ComplexCountryOfOriginCode'. For example country of origin UC7M indicates at least 70% U.S. and Canadian content but assembled in Mexico. A code defined for a specific industry that indicates the countries of origin and percents in a single code. For example country of origin UC7M indicates at least 70% U.S. and Canadian content but assembled in Mexico. If standard country of origin codes are used, use the element 'CountryAndPercent' Communicates the need for an import license on a good or service. Valid values are ""false"" for no license required, and ""true"" for license Is the quantity of a material or product ordered by the customer. Cost peg distribution container. The primary goal of cost pegs is to relate costs to projects, project activities, and project elements. However, costs may be distributed without relating them to projects. This is the quantity of product or item that is shipped. The shipped auxiliary quantity on this transaction. e.g. where an item has an auxiliary quantity defined as a weight in KG, this would be the weight in KGs The quantity of item’s, products or resources open to processing on a document header or line. This is the quantity of the item that has not been received or shipped, but remains open. Available in PO, CustomerPO, ASN, ReceiveDelivery, ServiceConsumtion, Shipment, and ShipmentUnit nouns. This is the quantity of product or item that is on back order in the base UOM. Is used to identify who or which organization owns the item or part. The content of this Field is user defined based on a specific Customer or Supplier. The estimated weight of an item or object. This is the net weight at loading time of a container in which the materials are being shipped. Is a reference to a Requisition References the PurchaseOrder noun. References the SalesOrder noun. A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Identifies the lot number and serial number details for a specific quantity of items. This can be used to identify either all the serial numbers within a given lot, or lot numbers and serial numbers independent of each other Is the Lot and Serial numbers for the items contained in the associated component by identifing the number of items and the uniques serial number of those items that belong to a given Lot. Is the identifier of the given Line Component within the document Indicates the current state of the associated object. The receiving service charge amount represents a charge that was added onto the line at receiving time. This can happen when the driver has to unload his truck, or when there is a special charge from the carrier for the line item. This is the quantity that is shown on the Packing Slip when goods are received from a supplier. This information is generally obtained from the supplier's Advance Ship Notice (ASN) or manually entered on receipt. Is the number of items that have been received for the associated entity. The received auxiliary quantity on this transaction. e.g. where an item has a auxiliary quantity defined as a weight in KG, this would be the weight in KGs Is the quantity of items returned to inventory. Or when used in logistics: The the quantity of the item for which the customer refused delivery. This determines the receipt routing of an item or part. Examples of values include: Customer consignment Inspection Vendor consignment Blocked Bonded User defined SYNONYMS Material Status Material Condition Code ## Not supported, use the corresponding AuxiliaryQuantity. This is the actual weight of the ReceivedQuantity for the Item if the NetWeightQuantity cannot be calculated precisely via arithmetic because the goods do not have a consistent per unit weight. This quantity is generally used with the CatchWeightConversion Factor. ## Not supported, use the corresponding AuxiliaryQuantity ## Not supported, use the corresponding AuxiliaryQuantity .The catch weight conversion factor is a stock keeping conversion factor for inventory goods. This is a special conversion factor for when the units of measure can not be converted using arithmetic. This conversion factor is used with the CatchWeightQuantity. Examples of the use of this factor include: Number of Chickens to a Box Number of units of a chemical in a barrel Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. This value in conjunction with the ID must uniquely identify the item in the enterprise. when no schemeName exists this is the default scheme for the enterprise and the value of the ID and Version must uniquely identiy an item throughout the enterprise. This can be set to SKU for a common ID for this product within a limited scope, OwnerSKU for the SKU used by the owner of the item in a 3PL environment, or it can be one of "Customer", "Supplier" or "Manufacturer" for those common cross references. The OAGIS standard has elements for CustomerItemID, ManufacturerItemID, and SupplierItemID that are not used at Infor as they are redundant to this top level element and because their cardinality rules don't match our use cases. The ID of the Owner, Customer, Manufacturer or Supplier that uses this ID to reference this item The name of the Owner, Customer, Manufacturer or Supplier that uses this ID to reference this product The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. GTIN is one of the multiple GS1 ID keys used for items. When no schemeName is specified, the receiving application must try to identify the type of GTIN from the ID itself (like how it used to be when only a single GTIN could be specified in earlier versions). There could be multiple GTINs available in some cases; if there is a need to publish all these, then this attribute must be used. Valid values are GTIN-8 GTIN-12 GTIN-13 GTIN-14 Identifies the type of party: Customer, Supplier, or Manufacturer. ID of Party Accounting entity of Party This is required for language codes other than ""en-us"" when the element that includes this attribute is used. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type associated with this group of classifications. Element for the communication of all codes. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The identifier for a specification. This does not point to another noun and does not use the accounting entity, location or lid attributes. Represents the Properties or Features of the associated entity A code used to indicate if this specification is used to define a minimum, maximum, or target value. An indicator used to identify Specifications that are likely not of interest to an ERP system. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. An identifier for an hazardous material. This is an ID provided by an external agency. Used to identify a Medical First Aid Guide (MFAG) for hazardous substance. Technical name means a recognized chemical name or microbiological name currently used in scientific and technical handbooks, journals, and texts. Generic descriptions are authorized for use as technical names provided they readily identify the general chemical group, or microbiological group. Examples of acceptable generic chemical descriptions are organic phosphate compounds, petroleum aliphatic hydrocarbons and tertiary amines. For proficiency testing only, generic microbiological descriptions such as bacteria, mycobacteria, fungus, and viral samples may be used. Trade names may not be used as technical names. The placard endorsement that is to be shown on shipping papers for hazardous materials. Can also be used for the number of the orange placard (lower part) require on transport. The placard notation that is to be shown on shipping papers for hazardous materials. Can also be used for the number of the orange placard (upper part) require on transport. Specifies the level of marine pollution for this hazardous substance. IMDG Code A code identifying the Inhalation Toxicity Hazard Zone for the hazardous substance, this is generally identfied by a government agency in the United States this is provided by the US Department of Transportation. Temperature of the associated hazardous material. FlashpointTemperature is related to hazadous substances or goods, indicates the temperature at which the associated substance of goods become flammable, explossive or toxic.. The primary entry route by which the Hazardous Material gains access to the human body. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Material Safety Data Sheet Quantity that must be spilled to consider it critical The percentage of the active ingredient in the final product CAS number is a numeric designation given to a specific chemical compound by the Chemical Abstract Service. Code of Federal Regulations packaging code - Title 49 Part 173. (Examples: I, II or III) When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for langauge codes other than 'en-us' when this field is used. This is required for langauge codes other than 'en-us' when this field is used. This is required for langauge codes other than 'en-us' when this field is used. This attribute contains the Code List ListID for the code that it is associated with. Hazardous Materials - Marine Pollution Levels The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This attribute contains the Code List ListID for the code that it is associated with. Toxicity Zones The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The sheet number for the sheet that describes the hazard of this material and the proper method of treatment. Last date this document was published. Link to an on-line version of the MSDS document The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the type of packaging - outer, inner etc. Provides the dimensions of the associated component. Identifies the code that is associated with the package level that the UPC is designated to. Is the number of instances of the item in the unit of measure contained with in the package. Is the maximum number of instances of an item in the unit of measure that maybe contained within the package. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Indicates the width of an object Indicates the length of an object Indicates the Height of an object Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Indicates the type of dimension that is associated with the Packaging. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ListID for the code that it is associated with. UPC Packing Levels The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Holds the Lot IDs associated with the LotSerial. Unique serial number assigned to the given item instance by the manufacturer. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Indicates the type of inventory characteristic specified (eg. pack date time, size etc.) Used when the type depicts a characteristic of string data type Used when the characteristic is a date time value This attribute contains the Code List ID for the codes that are associated with corresponding entity. Country in which the Address exists. The list of values is specified in ISO 3166-2. The percentage of the item that comes from the specific country This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the identifier of the given Line Component within the document Reference to a ProjectMaster noun Date and time that the associated entity took place . Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The monetary value of the object in which the amount is associated Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. This attribute contains the Code List ID for the codes that are associated with corresponding entity. References the ProjectExtension BOD. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The ID that is associated with an acitivity for the Project. Identifier of the cost pegged Project Element. Identifies the Type of project that is being referenced. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Is the primary document id for the document associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ListID for the code that it is associated with. Ownership Codes The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Is the primary document id for the document associated. Is the identifier of the given Line Component within the document An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Is the primary document id for the document associated. Identifies the Release Number in the case of Blanket POs Is the identifier of the given Line Component within the document Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Indicates the number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is the primary document id for the document associated. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Identifies the Release Number in the case of Blanket POs Is the identifier of the given Line Component within the document Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is the primary document id for the document associated. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Is the identifier of the given Line Component within the document A Facility identifies a location within an entity. The facility may have sub-locators identified using a sequenced identification notation e.g. Warehouse A100 Sub-Location 11, Row R10 would be represented as an array of three Facility elements with values as A100, 11, R10, name attribute as Warehouse, Sub-Location and Row and sequence attribute as 1,2 and 3 respectively. Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. Indicates the current state of the associated object. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ListID for the code that it is associated with. ItemStatus Identifies the quantity of an item. The quantity of the item in the Base UOM. Identifies the Lot that a given Item Instance belongs to. Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Unique serial number assigned to the given item instance by the manufacturer. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Identifies the method used for selecting the lot for an item. Standard values are ‘Any’, ‘Same’, or ‘Specific’ This element is only used when this lot is a sublot, it has a ParentLotId. Date when the item was manufactured Date when the item will expire. When this is not mentioned, it implies that there is no expiry date. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Holds ID information associated with the Item's Lots. Indicates the time period in which the associated component is effective. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The auxiliary quantity related to the primary quantity on this transaction.e.g. where an item has an auxiliary quantity defined as a weight in KG, this would be the weight in KGs Unique serial number assigned to the given item instance by the manufacturer. radio frequency identifier (RFID) A freeform note Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete ##Not supported. Please use CountryAndPercent element. Represents the identifier of the country of origin of an item, service or shipment Country of Origin information including a country code and a percentage.It is a collection with percentages and source and assembly. Many industries use standard country codes for Country of Origin. When there is a need to use custom codes (for example with Automotive), use element 'ComplexCountryOfOriginCode'. For example country of origin UC7M indicates at least 70% U.S. and Canadian content but assembled in Mexico. A code defined for a specific industry that indicates the countries of origin and percents in a single code. For example country of origin UC7M indicates at least 70% U.S. and Canadian content but assembled in Mexico. If standard country of origin codes are used, use the element 'CountryAndPercent' Characteristics that are tracked through out the warehouse and reported at the item instance level An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Element for the communication of all codes. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions This attribute contains the Code List ListID for the code that it is associated with. Disposition Codes The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Available or OnHold date and time this document becomes effective The actual hold code Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ListID for the code that it is associated with. GenericStatus The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Indicates what type of note is being specified and is associated to an Infor defined code list, ''Note Types,'' This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it.