Provides header information that pertains to the entire ProductionOrder. Provides Detail information that pertains to the entire ProductionOrder. Is the primary document id for the document associated. Is the alternate document id for the associated document. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. All dates and times will be provided in GMT. A reference tot he person that took the action that caused this BOD to be published. The date and time when this document was created. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Indicates the current state of the associated object. An item has one or more routings. Another item can have a routing with the same routing code Bill Of Resources References ### Not supported :Identifies the Site Location that the associated entity occurs. Indicates the coutry of origins of the item Indicates the destination country of the item(s) Priorty code for this production order. Is the quantity of material or product ordered by the customer.Note that this is for the primary item, and is published by very few applications. The quantities at OutputItem will give a more accurate picture. Cost peg distribution container. The primary goal of cost pegs is to relate costs to projects, project activities, and project elements. However, costs may be distributed without relating them to projects. The required quantity of items; Note that this is for the primary item, and is published by very few applications. The quantities at OutputItem will give a more accurate picture. Is the quantity of material or product due to the customer. Note that this is for the primary item, and is published by very few applications. The quantities at OutputItem will give a more accurate picture. Is the time in which the associated entity is actually in process. TimePeriod indicating the forecasted start and finish datetimes. Is the TimePeriod in which the work is run in regards to machine/tool/or operator task time TimePeriod indicating setup time for resource(s) TimePeriod indicating the teardown of resource(s) Date production order item(s) are to be delivered specifed by manufacturer, scheduling or production The date and time that the production order is to be completed specified by manufacturing, scheduling or production. Indicates the date the goods or services are required by the customer. This is a drop dead date specified by the customer. Is the date and time that the good or services will be available. Production Order Reason code Is the reference number associated with in-plant routing information. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Indcates if this production order is the result of rework to be performed. Planner Person References ShopFloorPlanner Person References By setting the Production Order to Forward scheduling you are essentially adding the Production order to the end of the current schedule. (Schedule next available time by operation) So you are not concerned with the customer’s want date, you schedule forward based upon your shop capacity. The date and time the production order is planned to be due. The date time the customer would like the goods and services to be delivered. Specified by the customer. Planned cost of the given item Contains the total cost; note that this would contain all the cost types that were not specified with the Costing element. ##Not supported; use TotalCost instead.Contains the total cost; note that this would represent the sum of all the cost types that were not specified with the Costing element and the ones that are specified with Costing. ##Not supported; use TotalCost instead. ##Not supported; use TotalCost instead. To specify the total reject quantity details for the production order (for all the operations) Indicator to determine if prior operations should be back flushed. The earliest date/time that production can start. References the SalesOrder noun. Type of Production Order examples would be Assembly Orders , ShopFloor Orders, Re-work, Maintenance Task. This is the ProductionOrder number Identifies the engineering change revision that this entity addresses. This can reference any other noun that is relevant to this transaction such as SalesOrder, ProductionOrder, or Transfer The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Indicates type of note This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Is the primary document id for the document associated. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Is the identifier of the given Line Component within the document A Facility identifies a location within an entity. The facility may have sub-locators identified using a sequenced identification notation e.g. Warehouse A100 Sub-Location 11, Row R10 would be represented as an array of three Facility elements with values as A100, 11, R10, name attribute as Warehouse, Sub-Location and Row and sequence attribute as 1,2 and 3 respectively. Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. The Name of the noun that is being referenced. This can reference any other noun that is relevant to this transaction such as SalesOrder, ProductionOrder, or Transfer Identifies the engineering change revision that this entity addresses. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. Effective date and time of this status Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. Production Order Status This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note This is the Bill Of Resources ID Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Indicates what type of note is being specified and is associated to an Infor defined code list, ''Note Types,'' This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The ID of the location where production will take place. This is the ID if the used in conjunction with the item ID for identifying the ItemLocation objects. Exmaples could be Bin, Line, Workcenter, Building. Identifies the Name of the object in which associated. This describes a purpose or orientation toward a goal that serves to guide or motivate. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the current state of the associated object. The location where production will take place When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. The name of the person to whom this document would be intended. Holds the lines that make up the address. The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. The building or house name on the street that identifies the location. The street name of the building or house that identifies the location. The unit of the building or house that identifies the location. The floor of the building or house that identifies the location. The post office box that is used for the location. Qualifies the further division of the City, example a city may have many districts or Boroughs. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. This attribute contains the Code List ListID for the code that it is associated with. Address Format Codes This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The sequence number of this address line. This is required for langauge codes other than 'en-us' when this element is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ListID for the code that it is associated with. Countries PostalCode The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ListID for the code that it is associated with. Countries Production Order Priorities Unit of measure. Is the identifier of the given Line Component within the document Reference to a ProjectMaster noun Date and time that the associated entity took place . Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The monetary value of the object in which the amount is associated Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. This attribute contains the Code List ID for the codes that are associated with corresponding entity. References the ProjectExtension BOD. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The ID that is associated with an acitivity for the Project. Identifier of the cost pegged Project Element. Identifies the Type of project that is being referenced. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Is the primary document id for the document associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Unit of measure. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The timestamp marking the beginning of a time period during which a related entity. The timestamp marking the ending of a time period during which a related entity. The timestamp marking the beginning of a time period during which a related entity. The timestamp marking the ending of a time period during which a related entity. Start date time of the run End date time of the run The timestamp marking the beginning of a time period during which a related entity. The timestamp marking the ending of a time period during which a related entity. The timestamp marking the beginning of a time period during which a related entity. The timestamp marking the ending of a time period during which a related entity. Production Order Reasons The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Is the identifiers for the Operation Person(s) Name of the operation person Planner Person ID The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. This is required for language codes other than 'en-us' when this field is used. Is the identifiers for the ShopFloorPlanner Person(s) Name of the ShopFloorPlanner person ShopFloorPlanner Person ID The amount of cost for the current operation for the specified cost rate type Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Cost rate type code (machine, burden, labour, contractor, machine, and total) Type of cost to report; planned cost or actual cost Indicates the type of quantity used for costing (planned or actual) For example, when rateCode="Material", the total variance is actual quantity * actual cost versus planned quantity * planned cost. With this new attribute, it is possible to represent actual quantity * planned cost and allows calculation of detailed variances. Planned quantity at planned cost versus actual quantity at planned costs results in a quantity variance. Currency Code The monetary value of the object in which the amount is associated Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Type of cost to report; planned cost or actual cost The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. Quantity that is actually rejected during an inspection process for example. Note that this is for the primary item, and is published by very few applications. The quantities at OutputItem will give a more accurate picture. To specify how the rejected quantity gets distributed according to DispositionType The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the identifier of the given Line Component within the document Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Type of disposition. A value of the extensible code list 'Disposition Types'. Valid values include Rework (Existing Specification), Rework (New Specification), Reclassify, Return to Supplier, Scrap, Use As Is, Repair to Concession, No Fault Found, Awaiting Disposition. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the primary document id for the document associated. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Is the identifier of the given Line Component within the document An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Sequence number for the given production order detail Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Indicates the current state of the associated object. Bill Of Resources References Alternate Bill Of Resources References Is a reference to an associated work-in-process operation. The location of a The PLM system or engineer (we were working with a tomato soup example) creates the bill of resources. This is basically a recipe that identifies the materials used and the steps involved in creating the desired output. A Planner will take that BillOfResources and assign it to a production facility (line) and that will create a ProductionOrder that is open - not yet in production. The production supervisor will review the order and then release it to production. The operator will update the order as they complete steps. Subcontract information associated with the order. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note This is the Bill Of Resources ID Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Sequence number for the given parent bill of resources. This is the operation ID Identifies the engineering change revision that this entity addresses. Contains header information associated with the BOR object. Operations for a given Bill Of Resources Is the primary document id for the document associated. Is the alternate document id for the associated document. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. The date and time when this document was created. This element repeats as needed to provide support for multilingual descriptions. A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Indicates the current state of the associated object. Document reference for referencing BillOfResource/Operation. Indicates this is the primary BillOfResources for the Primary OutputItem date and time this document becomes effective Date and time that this document becomes inactive Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. This is the BillOfResources ID This is the revision ID When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. Is the primary document id for the document associated. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Is the identifier of the given Line Component within the document A Facility identifies a location within an entity. The facility may have sub-locators identified using a sequenced identification notation e.g. Warehouse A100 Sub-Location 11, Row R10 would be represented as an array of three Facility elements with values as A100, 11, R10, name attribute as Warehouse, Sub-Location and Row and sequence attribute as 1,2 and 3 respectively. Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. A BillOfResources will have the statuses of 'Pending', 'Active', or 'Obsolete'. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. ID or sequence of the operation. ID of the next operation. To be filled in on all operations but the last. This element repeats as needed to provide support for multilingual descriptions. A freeform note Common References to DocumentReferences Indicates the current state of the associated object. Item(s) Consumed in order to produce a desired item(s). Note that the lot/serial numbers known during the life cycle of the production order must be part of the BOD. The resulting item from the given Items Consumed and Operation(s). Note that the lot/serial numbers known during the life cycle of the production order must be part of the BOD. Constrained Resource References Identifies the type of container used to place the items that result from the operation. Is a process code used for grouping like operations. Possible examples are: Heat Treat, Dyeing List of codes indicating whether the machine can be setup for the operation early or whether setup must happen at a specific time depending upon conditions. Defines a maximum number of parallel work teams allowed. The fixed number of parts that will be rejected during setup, and teardown of an operation. Actual number of parts rejected during an operation. The part of the sample quantity rejected after testing in the base unit of measure. This is the quantity of a product or item made during a batch production run or the amount of material produced by the operation being defined. An example would be how many cookies are produced by a particular operation. Indicates the number of items that have perished within the operation Indicates the number of items that have perished between operations. This is quantity to be transferred between operations within one lot. This is the time it takes to setup to run the operation. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is the time an operation can wait after being run. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is the time per item to perform the specific operation. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is the time it takes to tear down from running an operation. The time it takes before setup for another operation can be performed. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is a fixed duration of time indicating the time it takes to perform a batch operation. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is the time the job may be in the queue before being able to be run at the work center location. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is the time it takes to move the part from one work center location to another work center location. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is the fixed duration of time where the time it takes to perform the operation is known and fixed prior to the operation being performed. An example of this would be something sent out to be worked, where the duration of the processis known before it actually happens.. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is the percentage to be rejected This is the amount of time to wait before beginning the next operation. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. This is the amount of time to wait before beginning this operation. Duration represents a duration of time. The value space of duration is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in 5.5.3.2 of [ISO 8610], respectively. THese components are ordered in their signifigance by their order of appearance i.e. year, month, day, hour, minute and second. Identifies the Site Location that the associated entity occurs. Indicates that time can be saved by running this operation multiple times. Indicates whether the operation should be tracted. Represents the different Charges that may be applied to the associated document. Step(s) of the given operation Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Effictivity percentage Yield Percentage Skills required to perform this operation Identifies points in the process that is associated with certain actions. Indicates the quantity of items scraped References to tools needed to perform this step. Operation Person References Equipment References ### Not supported. Use ""WorkCenterReference"" instead of this element. This identifies an area consisting of one or more resources where production takes place. It is used to identify a specific Work Center on a Shop Floor or other manufacturing facility Specifies the related work center The number of times this operation is to be repeated Is the location that the associated entity receives raw material from. In the case of an Operation is the location that the Operation receives it's raw materials. In order to produce the specified widget the corresponding raw materials must be available at the given location. Indicates that the associated entity terminates the given process. Indicates various costs for the current item. @type defines whether the costs are planned or actual, and @rateCode specifies the type of cost. Note that for total cost, another element TotalCostAmount must be used. Contains the total cost; note that this would contain all the cost types that were not specified with the Costing element. ##Not supported; use TotalCost instead. Contains the total cost; note that this would represent the sum of all the cost types that were not specified with the Costing element and the ones that are specified with Costing. ##Not supported; use TotalCost instead. ##Not supported; use TotalCost instead. Is the time in which the associated entity is actually in process. TimePeriod indicating the forecasted start and finish datetimes. Is the TimePeriod in which the work is run in regards to machine/tool/or operator task time TimePeriod indicating setup time for resource(s) TimePeriod indicating the teardown of resource(s) Indicates the time period in which the associated component is effective. Indicates the existence of operation in a routing.Outside the effectivity dates the operation is not part of the routing. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for langauge codes other than 'en-us' when this field is used. Is the primary document id for the document associated. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Is the identifier of the given Line Component within the document A Facility identifies a location within an entity. The facility may have sub-locators identified using a sequenced identification notation e.g. Warehouse A100 Sub-Location 11, Row R10 would be represented as an array of three Facility elements with values as A100, 11, R10, name attribute as Warehouse, Sub-Location and Row and sequence attribute as 1,2 and 3 respectively. Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. This is the operation ID Identifies the engineering change revision that this entity addresses. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. Planned, Firm, Released, Active, Stopped, Cancelled, Completed, History, Closed. Planned (default) - BillOfResources has been incorporated into the ProductionOrder. The scheduling and resources are being worked out. Firm - scheduled and demand for the material have been confirmed. Released - release to the production line. Active - productionline is currently working on the material. Stopped - exception halt. Cancelled - don't need to make anymore. History - all is done .. no changes can be made..and reports can now be generated. Closed - terminal state date and time this document becomes effective Identifies the reason for an activity ### Not supported : An explicit period of time for the bucket. Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. ProductionOrderStatus The timestamp marking the beginning of a time period during which a related entity. The timestamp marking the ending 1of a time period during which a related entity. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Electronic Product CodeLike the Universal Product Code (UPC) or bar code, the Electronic Product Code(EPC) is the fundamental identifier for a physical object in a EPC Network. The EPC identifies the manufacturer, product, version and serial number, and uses an extra set of digits to identify unique items. The EPC Tag Data Standards Specification Version 1.1 defines the encoding of the Electronic Product Code onto the RFID chip, as well as how it is encoded for use in the information systems layer of the EPC Network (for example the RFID Information Server). GTIN describes a family of GS1 (EAN.UCC) global data structures that employ 14 digits and can be encoded into various types of data carriers. Currently, GTIN is used exclusively within bar codes, but it could also be used in other data carriers such as radio frequency identification (RFID). The GTIN is only a term and does not impact any existing standards, nor does it place any additional requirements on scanning hardware. For North American companies, the UPC is an existing form of the GTIN. Following are the general variants of GTIN GTIN12 (also known as UPC-A) GTIN13 (also known as EAN/UCC 13) GTIN8 (also known as EAN 8) GTIN14 (also known as EAN/UCC14 and ITF14) Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note description by which each customer or supplier knows this item A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Identifies the specification of an entity. Complex element that contains information about the hazardous material ratings of the item(s). Identifies the Packaging information for a given item. Note: The UPC here is the UPC of the packaging for a given item. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Is the Lot and Serial numbers for the items contained in the associated component by identifing the number of items and the uniques serial number of those items that belong to a given Lot. consumed item line number. A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Indicates the current state of the associated object. Indicates the type of Item being consumed. Name given to the item Indicates the Quantity of the input item Indicates wether the ItemQuantity is a fixed size and does not scale. Contains originating information associated with the consumed item. Indicator to determine if prior operations should be back flushed. Indicates various costs for the current item. @type defines whether the costs are planned or actual, and @rateCode specifies the type of cost. Note that for total cost, another element TotalCostAmount must be used. Contains the total cost; note that this would contain all the cost types that were not specified with the Costing element. ##Not supported; use TotalCost instead.Contains the total cost; note that this would represent the sum of all the cost types that were not specified with the Costing element and the ones that are specified with Costing. ##Not supported; use TotalCost instead. ##Not supported; use TotalCost instead. Percentage of yield Factor used to determine amount of scrap based on the amount/quantity of input item Amount of input item to be scrapped Number of inventory items that have been shipped Indicates the time period in which the associated component is effective. Schedule for input items for operations. Specify when input items are required. Alternate ItemConsumed to produce same output item. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Indicates whether the related object is to be tracked Indicates if the related item(s) are used by default for the given operation The lead time needed for a component item to be able to produce the end item on the required date. Hence requirement date of the consumed item is requirement date of the output item MINUS lead time offset.. The quantity of a component or material that is theoretically required to make a certain quantity of a product. This quantity is referred to as the net quantity because in practice you may need more than this quantity to make up for certain losses of the material or the product. Net quantity is defaulted from bom as published in BillOfResources/Operations/ConsumedItem/Quantity An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. Valid values for the Item are Customer, Supplier, Manufacturer, SKU, and Duplicate. The ID of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this item, in the case where the ID is from another system, this is the LogicalID of that system. The name of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this product The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. GTIN is one of the multiple GS1 ID keys used for items. When no schemeName is specified, the receiving application must try to identify the type of GTIN from the ID itself (like how it used to be when only a single GTIN could be specified in earlier versions). There could be multiple GTINs available in some cases; if there is a need to publish all these, then this attribute must be used. Valid values are GTIN-8 GTIN-12 GTIN-13 GTIN-14 An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Indicates type of note This is required for langauge codes other than 'en-us' when this field is used. Identifies the type of party: Customer, Supplier, or Manufacturer. ID of Party Accounting entity of Party This is required for language codes other than ""en-us"" when the element that includes this attribute is used. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Suggested Values are COMMODITY, FREIGHT, PRODUCTLINE Element for the communication of all codes. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The identifier for a specification. This does not point to another noun and does not use the accounting entity, location or lid attributes. Represents the Properties or Features of the associated entity A code used to indicate if this specification is used to define a minimum, maximum, or target value. An indicator used to identify Specifications that are likely not of interest to an ERP system. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties EngineeringReference' or 'DrawingNumber' Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. An identifier for an hazardous material. This is an ID provided by an external agency. Used to identify a Medical First Aid Guide (MFAG) for hazardous substance. Technical name means a recognized chemical name or microbiological name currently used in scientific and technical handbooks, journals, and texts. Generic descriptions are authorized for use as technical names provided they readily identify the general chemical group, or microbiological group. Examples of acceptable generic chemical descriptions are organic phosphate compounds, petroleum aliphatic hydrocarbons and tertiary amines. For proficiency testing only, generic microbiological descriptions such as bacteria, mycobacteria, fungus, and viral samples may be used. Trade names may not be used as technical names. The placard endorsement that is to be shown on shipping papers for hazardous materials. Can also be used for the number of the orange placard (lower part) require on transport. The placard notation that is to be shown on shipping papers for hazardous materials. Can also be used for the number of the orange placard (upper part) require on transport. Specifies the level of marine pollution for this hazardous substance. IMDG Code A code identifying the Inhalation Toxicity Hazard Zone for the hazardous substance, this is generally identfied by a government agency in the United States this is provided by the US Department of Transportation. FlashpointTemperature is related to hazadous substances or goods, indicates the temperature at which the associated substance of goods become flammable, explossive or toxic.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Material Safety Data Sheet Quantity that must be spilled to consider it critical The percentage of the active ingredient in the final product CAS number is a numeric designation given to a specific chemical compound by the Chemical Abstract Service. Code of Federal Regulations packaging code - Title 49 Part 173. (Examples: I, II or III) When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for langauge codes other than 'en-us' when this field is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ListID for the code that it is associated with. Hazardous Materials - Marine Pollution Levels The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This attribute contains the Code List ListID for the code that it is associated with. Toxicity Zones The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Required when the flashpoint is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The sheet number for the sheet that describes the hazard of this material and the proper method of treatment. Last date this document was published. Link to an on-line version of the MSDS document The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the type of packaging - outer, inner etc. Provides the dimensions of the associated component. Identifies the code that is associated with the package level that the UPC is designated to. Is the number of instances of the item in the unit of measure contained with in the package. Is the maximum number of instances of an item in the unit of measure that maybe contained within the package. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Indicates the width of an object Indicates the length of an object Indicates the Height of an object Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Indicates the type of dimension that is associated with the Packaging. Required when this measure is used Required when this measure is used Required when this measure is used This attribute contains the Code List ListID for the code that it is associated with. UPC Packing Levels The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Required when this measure is used The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Identifies the quantity of an item. The quantity of the item in the Base UOM. Identifies the Lot that a given Item Instance belongs to. Indicates whether an item is active, incative, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Unique serial number assigned to the given instance by the manufacturer. Description of the given lot. Notes pertaining to the given lot of items. Any, Same, Specific This element is only used when this lot is a sublot, it has a ParentLotId. Date when the item was manufactured Date when the item will expire. When this is not mentioned, it implies that there is no expiry date. Required when this measure is used The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Holds ID information associated with the Item's Lots. Indicates the time period in which the associated component is effective. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The auxiliary quantity related to the primary quantity on this transaction.e.g. where an item has an auxiliary quantity defined as a weight in KG, this would be the weight in KGs Unique serial number assigned to the given item instance by the manufacturer. radio frequency identifier (RFID) A freeform note Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete ##Not supported. Please use CountryAndPercent element. Represents the identifier of the country of origin of an item, service or shipment Country of Origin information including a country code and a percentage.It is a collection with percentages and source and assembly. Many industries use standard country codes for Country of Origin. When there is a need to use custom codes (for example with Automotive), use element 'ComplexCountryOfOriginCode'. For example country of origin UC7M indicates at least 70% U.S. and Canadian content but assembled in Mexico. A code defined for a specific industry that indicates the countries of origin and percents in a single code. For example country of origin UC7M indicates at least 70% U.S. and Canadian content but assembled in Mexico. If standard country of origin codes are used, use the element 'CountryAndPercent' Characteristics that are tracked through out the warehouse and reported at the item instance level An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. These co Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. Required when this measure is used The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Element for the communication of all codes. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions This attribute contains the Code List ListID for the code that it is associated with. Disposition Codes The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This attribute contains the Code List ListID for the code that it is associated with. Countries Country in which the Address exists. The list of values is specified in ISO 3166-2. The percentage of the item that comes from the specific country This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Indicates the type of inventory characteristic specified (eg. pack date time, size etc.) Used when the type depicts a characteristic of string data type Used when the characteristic is a date time value This attribute contains the Code List ID for the codes that are associated with corresponding entity. Disposition Code Free form text that describes the object and repeats as needed to provide support for multilingual descriptions When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the primary document id for the document associated. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Is the identifier of the given Line Component within the document A Facility identifies a location within an entity. The facility may have sub-locators identified using a sequenced identification notation e.g. Warehouse A100 Sub-Location 11, Row R10 would be represented as an array of three Facility elements with values as A100, 11, R10, name attribute as Warehouse, Sub-Location and Row and sequence attribute as 1,2 and 3 respectively. Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. This is the the ID if this instance is a non-item consumable Identifies the engineering change revision that this entity addresses. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ListID for the code that it is associated with. Item Status Item Types This is required for langauge codes other than 'en-us' when this field is used. Required when this measure is used. Is the identifier of the given Line Component within the document Reference to a ProjectMaster noun Date and time that the associated entity took place . Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The monetary value of the object in which the amount is associated Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Used to aggregate cost data for reporting Indicates a reference to project extension Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The ID that is associated with an acitivity for the Project. cost pegged Project Element Identifies the Type of project that is being referenced. Identifier of the cost pegged Project Element. Indicates the destination country of the item(s) OED: A rate, number or proportion in each hundred. This is the amount of time consumed or used. Duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. The amount of cost for the current operation for the specified cost rate type Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. percent of the total cost of the operation to be applied to the specified cost rate type amount of cost represented by quantity of a resources used (ie number of kilowatt hours used) Cost rate type code (machine, burden, labour, contractor, etc..) Type of cost to report; planned cost or actual cost Indicates the type of quantity used for costing (planned or actual) For example, when rateCode="Material", the total variance is actual quantity * actual cost versus planned quantity * planned cost. With this new attribute, it is possible to represent actual quantity * planned cost and allows calculation of detailed variances. Planned quantity at planned cost versus actual quantity at planned costs results in a quantity variance. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. input item Schedule Line number Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note The document reference is used to associate the Requisition line to the other documents so that the proper accounting entried can be determined. While most information can be inferred from the associated documents the ideal interface should include the master data that is referenced by the associated documents so that the system that builds the actual accounting entries isn't required to read as many documents. This is required if the line exists. If this is set to 0 on an existing line then this has the effect of deleting the line. Indicates the date in which the buyer/customer requests the order to be delivered. When an “earliest�? date/time is given, it is the latest date/time the customer wants the order delivered. Is the number of deliveries for the quantity on Schedule. Is the amount of time over the intended taget time or date that is allowed. Duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. These components are ordered in their significance by their order of appearance i.e. as year, month, day, hour, minute, and second. Number of inventory items that have been shipped Is the primary document id for the document associated. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Is the identifier of the given Line Component within the document A Facility identifies a location within an entity. The facility may have sub-locators identified using a sequenced identification notation e.g. Warehouse A100 Sub-Location 11, Row R10 would be represented as an array of three Facility elements with values as A100, 11, R10, name attribute as Warehouse, Sub-Location and Row and sequence attribute as 1,2 and 3 respectively. Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. The Name of the noun that is being referenced. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. This can reference any other noun that is relevant to this transaction such as SalesOrder, ProductionOrder, or Transfer The name of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this product The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required to define every quantity. Use only ISO Units of Measure. Identifies reason for the current state of the specified output item schedule The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the current state of the associated object. Is the identifier of the given Line Component within the document An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. This is the ItemConsumed ID Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The ID of the location where this item is stored. This is the ID if the used in conjunction with the item ID for identifying the ItemLocation objects. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Identifies the Name of the Location Address for the given location Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. Used to indicate if a location is not a physical internal warehouse, but rather one used for tracking direct shipments. Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. The building or house name on the street that identifies the location. The street name of the building or house that identifies the location. The unit of the building or house that identifies the location. The floor of the building or house that identifies the location. The post office box that is used for the location. Vanity city name like La Jolla for San Diego The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. The sequence number of an address. This is required for langauge codes other than 'en-us' when this element is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The numeric ranking of this element in a collection of like elements where 1 is the preferred option. Indicates that this element is the prefered element in a collection of like elements. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ListID for the code that it is associated with. GenericStatus The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Electronic Product CodeLike the Universal Product Code (UPC) or bar code, the Electronic Product Code(EPC) is the fundamental identifier for a physical object in a EPC Network. The EPC identifies the manufacturer, product, version and serial number, and uses an extra set of digits to identify unique items. The EPC Tag Data Standards Specification Version 1.1 defines the encoding of the Electronic Product Code onto the RFID chip, as well as how it is encoded for use in the information systems layer of the EPC Network (for example the RFID Information Server). GTIN describes a family of GS1 (EAN.UCC) global data structures that employ 14 digits and can be encoded into various types of data carriers. Currently, GTIN is used exclusively within bar codes, but it could also be used in other data carriers such as radio frequency identification (RFID). The GTIN is only a term and does not impact any existing standards, nor does it place any additional requirements on scanning hardware. For North American companies, the UPC is an existing form of the GTIN. Following are the general variants of GTIN GTIN12 (also known as UPC-A) GTIN13 (also known as EAN/UCC 13) GTIN8 (also known as EAN 8) GTIN14 (also known as EAN/UCC14 and ITF14) Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note description by which each customer or supplier knows this item A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Identifies the specification of an entity. Complex element that contains information about the hazardous material ratings of the item(s). Identifies the Packaging information for a given item. Note: The UPC here is the UPC of the packaging for a given item. Unique serial number assigned to the given item instance by the manufacturer. Is the Lot and Serial numbers for the items contained in the associated component by identifing the number of items and the uniques serial number of those items that belong to a given Lot. Indicates the type of Item Data ie. Primary Indicates the time period in which this item is effective. Is the time in which the associated item is actually in process. Indicates wether the ItemQuantity is a fixed size and does not scale along with the quantity of the ItemConsumed being produced. Is the maximum number of items that can be put into a lot for this item. Is the minimum number of items that can be put into a lot for this item. Is the duration of time that is required to add to a manufacturing process to forecast availability of this item. This is the percentage of the total quantity on the Bill of Material that is required to be available before the manufacturing process can begin. Indicator to determine if prior operations should be back flushed. Indicates whether the related object is to be tracked. Indicates if an item is a scrapped item. output item line number. default=100 - divide required qty by factor Used to indicate if the item is to be put back into the process This is the quantity of a product or item made during a batch production run or the amount of material produced by the Operation being defined. An example would be how many cookies produced by a particular Operation.. Quantity Produced Indicates the quantity of the given item in transit Represents the portion of the quantity received from this ProductionOrder that has made it into inventory - as opposed to still being in transit Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Is the quantity of a material or product ordered by the customer. The number currently due or scheduled to be completed. Number of inventory items that have been shipped Rejection quantity and reason Indicates various costs for the current item. @type defines whether the costs are planned or actual, and @rateCode specifies the type of cost. Note that for total cost, another element TotalCostAmount must be used. Contains the total cost; note that this would contain all the cost types that were not specified with the Costing element. ##Not supported; use TotalCost instead.Contains the total cost; note that this would represent the sum of all the cost types that were not specified with the Costing element and the ones that are specified with Costing. ##Not supported; use TotalCost instead. ##Not supported; use TotalCost instead. Percentage of cost allocated Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Schedule of when output items are to be released to the warehouse. The quantity of a component or material that is theoretically required to make a certain quantity of a product. This quantity is referred to as the net quantity because in practice you may need more than this quantity to make up for certain losses of the material or the product. Net quantity is defaulted from bom as published in BillOfResources/Operations/ConsumedItem/Quantity The number of the specified unit of this item that are expected to be accepted as output from this operation. The number of the base unit of measure for this item that are expected to be accepted as output from this operation. The number of this unit of this item that are expected to be rejected when output from this operation. The number in the base unit of measure for this item that are expected to be rejected when output from this operation. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Suggested Values are COMMODITY, FREIGHT, PRODUCTLINE Element for the communication of all codes. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This is the name of one of Dimensions that are maintained by the PublicMDM. These can be user defined or provided by Infor, OAGIS, etc… The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Identifies the quantity of an item. The quantity of the item in the Base UOM. Identifies the Lot that a given Item Instance belongs to. Indicates whether an item is active, incative, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Unique serial number assigned to the given instance by the manufacturer. Description of the given lot. Notes pertaining to the given lot of items. Any, Same, Specific This element is only used when this lot is a sublot, it has a ParentLotId. Date when the item was manufactured Date when the item will expire. When this is not mentioned, it implies that there is no expiry date. Item Types The timestamp marking the beginning of a time period during which a related entity. duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. These co The timestamp marking the ending of a time period during which a related entity. Required when this measure is used The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Required when this measure is used The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Required for this unit of measure. Is the identifier of the given Line Component within the document Reference to a ProjectMaster noun Date and time that the associated entity took place . Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The monetary value of the object in which the amount is associated Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Indicates a reference to project extension Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The ID that is associated with an acitivity for the Project. cost pegged Project Element Identifies the Type of project that is being referenced. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Required for this unit of measure. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Required for this unit of measure. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Quantity of a given item rejected. To specify how the rejected quantity gets distributed according to DispositionType Reject code that applies to the given quantity of an item rejected. Required for this unit of measure. Is the identifier of the given Line Component within the document Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Type of disposition. A value of the extensible code list 'Disposition Types'. Valid values include Rework (Existing Specification), Rework (New Specification), Reclassify, Return to Supplier, Scrap, Use As Is, Repair to Concession, No Fault Found, Awaiting Disposition. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. RejectReason The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. output item Schedule Line number Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note The document reference is used to associate the Requisition line to the other documents so that the proper accounting entried can be determined. While most information can be inferred from the associated documents the ideal interface should include the master data that is referenced by the associated documents so that the system that builds the actual accounting entries isn't required to read as many documents. This is required if the line exists. If this is set to 0 on an existing line then this has the effect of deleting the line. Indicates the date in which the buyer/customer requests the order to be delivered. When an “earliest�? date/time is given, it is the latest date/time the customer wants the order delivered. Is the number of deliveries for the quantity on Schedule. Is the amount of time over the intended taget time or date that is allowed. Duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. These components are ordered in their significance by their order of appearance i.e. as year, month, day, hour, minute, and second. Number of inventory items that have been shipped The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the identifiers of the given constrained resource Type of Resource ie welder, mechanic, machine operator, etc. The number of resource required of the specified resource type Identifies the Name of the object in which associated. ConstrainedResourcetID When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. ResourceCode Unit of measure This attribute contains the Code List ListID for the code that it is associated with. Container Types The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This attribute contains the Code List ListID for the code that it is associated with. Process Codes The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Indicates whether the machine can be setup for the operation early or wheter setup must happen at a specific time depending upon conditions. MachineSetupDependency Unit of measure The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Unit of measure The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Unit of measure The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Unit of measure The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Unit of measure The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The ID of the location where this item is stored. This is the ID if the used in conjunction with the item ID for identifying the ItemLocation objects. Identifies the Name of the object in which associated. This describes a purpose or orientation toward a goal that serves to guide or motivate. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the current state of the associated object. Identifies the Type that is associated with the Site. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The Chargeable amount for this requisition. The quantity of the Chargeable item. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The Charge amount in the transaction currency Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Allows the sender to indicate how the Charge/Allowance was calculated. Charge code Identifies the exchange rate between two currencies An explicit period of time for the bucket. Identifies the Name of the object in which associated. Indicates the tax for the object associated. The basis amount for each quantity of 1 of the unit of measure. The amount of the adjustment for each quantity of 1 of the unit of measure. A code used to identify the purpose of an adjustment. Could include codes for non-itemized and pre-tax. A code used group charges or allowances together to simplify posting for those systems that cannot or do not support a full range of adjustments. Identifies how the object being referenced is to be calculated. This is the unit of measure code that is assigned to this package. This must be unique within the item/supplier. Specifies the currency rate of the object in which it is associated. Used by pricing to indicate that the calculation is based on the gross weight rather than the net weight. Identifies the type of charge that the given instance of Charge/Allowance. sequence in which charge occurred. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the multiplier appied to the base amount or the base quantity in order to calculate the amount. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions ChargeReason The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The source Currency Code for the monetary amount to be converted. Specifies the unit base of the source currency for currencies with small denominations. The target Currency Code for the monetary amount to be converted. Specifies the unit base of the target currency for currencies with small denominations. Is the multiplier appied to the base amount or the base quantity in order to calculate the amount. Indicates the time period in which the associated component is effective. This attribute contains the Code List ListID for the code that it is associated with. Currencies This attribute contains the Code List ListID for the code that it is associated with. Currencies An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Defines the tax authority to which taxes must be paid. The determining location is the location to which the asset was delivered. The taxable amount for this tax jurisdiction expressed in the transaction currency. The taxable amount for this tax jurisdiction expressed in the base currency. The taxable amount for this tax jurisdiction expressed in the report currency. The quantity used for calculating the tax in the transaction unit of measure. The quantity used for calculating the tax in the base unit of measure. Allows the sender to indicate how the Charge/Allowance was calculated. Uniquely identifies the exemption along with the agency that defines the excemption. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note This is used to represent the tax amount for this jurisdiction in the currency of the taxing authority. Same as Tax/BaseAmount; either this element or Tax/BaseAmount could be used. The amount of tax payable on this transaction for this jurisdiction expressed in the transaction currency. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Identifies the sequence of how the taxes must be applied. Indicates that tax code of the tax being represented by the given instance of tax. Possible values are: Sales Tax, Use Tax, VAT To further classify type; for example for VAT, the following categories could be applicable - Higher Rate, Lower Rate, Zero rate etc Element for the communication of all codes. This attribute contains the Code List ListID for the code that it is associated with. Tax Jurisdiction Codes The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Exemption Code Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note The amount of this transaction that is exempt from tax by this jurisdiction expressed in the transaction currency. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. This attribute contains the Code List ListID for the code that it is associated with. Adjustment Types This attribute contains the Code List ListID for the code that it is associated with. Adjustment Groups The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This attribute contains the Code List ListID for the code that it is associated with. Calculation Methods This attribute contains the Code List ListID for the code that it is associated with. Rate Types This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Sequence number of this step. This element repeats as needed to provide support for multilingual descriptions. A freeform note Common References to DocumentReferences Indicates the type of step Identifies the sequence in which the step is to occur with in a given operation, step or business process. To specify consumed items for assembly orders. 1. Assembly has only materials per step and not at operation level. 2. Costing is not at step level: assembly uses either order based or line station based costing. 3. Assembly does not allow byproducts, assembly orders always have quantity 1 which is either completed or still in progress (no rejects) Represents the different Charges that may be applied to the associated document. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. References to tools needed to perform this step. Instructions pertaining to the step Constrained Resource References Operation Person References Equipment References StepType The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. SequenceCode The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. GTIN describes a family of GS1 (EAN.UCC) global data structures that employ 14 digits and can be encoded into various types of data carriers. Currently, GTIN is used exclusively within bar codes, but it could also be used in other data carriers such as radio frequency identification (RFID). The GTIN is only a term and does not impact any existing standards, nor does it place any additional requirements on scanning hardware. For North American companies, the UPC is an existing form of the GTIN. Following are the general variants of GTIN GTIN12 (also known as UPC-A) GTIN13 (also known as EAN/UCC 13) GTIN8 (also known as EAN 8) GTIN14 (also known as EAN/UCC14 and ITF14) Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Is the identifier of the given Line Component within the document Identifies the Name of the object in which associated. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Indicates whether the consumed quantity is a fixed size and does not scale along with the ordered quantity Contains the total cost; note that this would contain all the cost types that were not specified with the Costing element. This is the quantity of product or item that is shipped. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. Valid values for the Item are Customer, Supplier, Manufacturer, SKU, and Duplicate. The ID of the entity that created the ID. When the schemeName is ""Customer"" or ""Supplier"" then this value is the ID of the customer or supplier. The name of the entity that created the ID. This is only used when the ID is defined externally and there is no ID for that agency - like for government agencies. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type associated with this group of classifications. Identifier of the given location within the scope of the integration Identifies the Name of the Location From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. This is required for langauge codes other than 'en-us' when this element is used. Type of instructions Code identifying skill required Name of the skill required. Number of crew members required for this skill Indicator to determine if this is the primary skill required Skill Effectivity percentage Unit of measure The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The ID assigned to an associated Resource. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. This attribute contains the Code List ListID for the code that it is associated with. Resource Codes Is the identifiers for the Operation Person(s) Type of Resource ie welder, mechanic, machine operator, etc. Number of Operation Persons need based on the ResourceType code Identifies the Name of the object in which associated. Operation Person Resource ID Is the identifiers of the given equipment resource Type of Resource ie welder, mechanic, machine operator, etc. Number of pieces of equipment needed of the resource type code requested. Identifies the Name of the object in which associated. EquipmentID The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The location ID associated with this in queue location. The name of the in queue location. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the current state of the associated object. Is the location that the associated entity receives raw materials from. In the case of an Operation is the location that the Operation receives it's raw materials. In order to produce the specific widget the corresponding raw materials must be available at the given location. Required if not 'en-us' This is the amount of time consumed or used. Duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. The amount of cost for the current operation for the specified cost rate type Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. percent of the total cost of the operation to be applied to the specified cost rate type amount of cost represented by quantity of a resources used (ie number of kilowatt hours used) Cost rate type code (material, burden, labor, contractor, machine, and total) Type of cost to report; planned cost or actual cost Indicates the type of quantity used for costing (planned or actual) For example, when rateCode="Material", the total variance is actual quantity * actual cost versus planned quantity * planned cost. With this new attribute, it is possible to represent actual quantity * planned cost and allows calculation of detailed variances. Planned quantity at planned cost versus actual quantity at planned costs results in a quantity variance. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. Contains the set of information about a Supplier Party necessary to execute and administer orders or requests. Items provided by the subcontractor. Items accompanying the order. Operations to be performed. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Maintains the locations or sites (offices, warehouses, plants) within the enterprise. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Identifies the sales contact and sales department/organization that is responsible for the sale that the instance is associated. Identifies the contact information of the person, organization, department, or group that is to shipping the contents communicated by the document or line. Identifies the contact information of the person, organization, department, or group that is responsible for customer service. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the party - Identifier for a business or individual provided by the government. This maybe a FIIN, Social Security Number, or Drivers License Number to name a few. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The name of the entity that created the ID. This is only used when the ID is defined externally and there is no ID for that agency - like for government agencies. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. The building or house name on the street that identifies the location. The street name of the building or house that identifies the location. The unit of the building or house that identifies the location. The floor of the building or house that identifies the location. The post office box that is used for the location. The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. The sequence number of an address. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Channel Code This attribute contains the Code List ListID for the code that it is associated with. Communication Use Codes Holds the lines that make up the address. The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. The building or house name on the street that identifies the location. The street name of the building or house that identifies the location. The unit of the building or house that identifies the location. The floor of the building or house that identifies the location. The post office box that is used for the location. Qualifies the further division of the City, example a city may have many districts or Boroughs. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. The sequence number of this address line. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Sales Contact. Methods of establishing communication with the Sales Contact. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Shipping Contact. Mehods of establishing communication with the Shipping Contact. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the CS Contact. Methods of establishsing communication with the CS Contact. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. GTIN describes a family of GS1 (EAN.UCC) global data structures that employ 14 digits and can be encoded into various types of data carriers. Currently, GTIN is used exclusively within bar codes, but it could also be used in other data carriers such as radio frequency identification (RFID). The GTIN is only a term and does not impact any existing standards, nor does it place any additional requirements on scanning hardware. For North American companies, the UPC is an existing form of the GTIN. Following are the general variants of GTIN GTIN12 (also known as UPC-A) GTIN13 (also known as EAN/UCC 13) GTIN8 (also known as EAN 8) GTIN14 (also known as EAN/UCC14 and ITF14) Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. GTIN describes a family of GS1 (EAN.UCC) global data structures that employ 14 digits and can be encoded into various types of data carriers. Currently, GTIN is used exclusively within bar codes, but it could also be used in other data carriers such as radio frequency identification (RFID). The GTIN is only a term and does not impact any existing standards, nor does it place any additional requirements on scanning hardware. For North American companies, the UPC is an existing form of the GTIN. Following are the general variants of GTIN GTIN12 (also known as UPC-A) GTIN13 (also known as EAN/UCC 13) GTIN8 (also known as EAN 8) GTIN14 (also known as EAN/UCC14 and ITF14) Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Is the Lot and Serial numbers for the items contained in the associated component by identifing the number of items and the uniques serial number of those items that belong to a given Lot. Identifies the quantity of the items accompanying the order. Identifies the quantity of an item. The quantity of the item in the Base UOM. Identifies the Lot that a given Item Instance belongs to. Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Unique serial number assigned to the given item instance by the manufacturer. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Identifies the method used for selecting the lot for an item. Standard values are ‘Any’, ‘Same’, or ‘Specific’ This element is only used when this lot is a sublot, it has a ParentLotId. Date when the item was manufactured Date when the item will expire. When this is not mentioned, it implies that there is no expiry date. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Holds ID information associated with the Item's Lots. Indicates the time period in which the associated component is effective. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The auxiliary quantity related to the primary quantity on this transaction.e.g. where an item has an auxiliary quantity defined as a weight in KG, this would be the weight in KGs Unique serial number assigned to the given item instance by the manufacturer. radio frequency identifier (RFID) A freeform note Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete ##Not supported. Please use CountryAndPercent element. Represents the identifier of the country of origin of an item, service or shipment Country of Origin information including a country code and a percentage.It is a collection with percentages and source and assembly. Many industries use standard country codes for Country of Origin. When there is a need to use custom codes (for example with Automotive), use element 'ComplexCountryOfOriginCode'. For example country of origin UC7M indicates at least 70% U.S. and Canadian content but assembled in Mexico. A code defined for a specific industry that indicates the countries of origin and percents in a single code. For example country of origin UC7M indicates at least 70% U.S. and Canadian content but assembled in Mexico. If standard country of origin codes are used, use the element 'CountryAndPercent' Characteristics that are tracked through out the warehouse and reported at the item instance level Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Used to classify the operation being performed. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of where it is used in the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Indicates what type of note is being specified and is associated to an Infor defined code list, ''Note Types,'' This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it.