Information that applies to the entire quote. The item or product quoted along with quantity, price and other descriptive information. Is the primary document id for the document associated. Is the alternate document id for the associated document. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. The datetime on which the object was last modified. A reference tot he person that took the action that caused this BOD to be published. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Indicates the current state of the associated object. Is the organization that is the end customer of the goods or services being provided in the associated transaction. Contains the set of information about a Supplier Party necessary to execute and administer orders or requests. Identifies the ShipToParty for the document or the line. Identifies the party that the goods or services are being shipped or sent from. Identifies the contact information of the person, organization, department, or group that planned for the timing of the exchange of goods/services that this document is associated at the document or line level. References the Catalog noun. Is an amount not including taxes or charges. In the case of orders, this is typically the Unit Price times the Order Quantity. This is represented in the transaction currency. Indicates the total amount of the object associated. This includes the Price and the total of all the charges, allowances and taxes. This is represented in the transaction currency. Indicates the total amount of the object associated. This includes the Price and the total of all the charges, allowances and taxes. This is represented in the base currency. Indicates the total amount of the object associated. This includes the Price and the total of all the charges, allowances and taxes. This is represented in the report currency. Identifies a given portion of an organization. Identifies the party that the bill or invoice is to be sent. In most cases this is the same as the CustomerParty however there are many cases where the CustomerParty and the BillToParty will be different. Idenitfies the party that serves as the carrier of the goods or services for the transaction. Identifies the party that the payment for the goods or services will come. Identifies if a partial shipment is allowed. Indicates whether the order can be drop shipped or not. Communicates if it is permitted to ship a good or service prior to the date it is due. Valid values are ""false"" for early shipment not allowed, and ""true"" for early shipment allowed. Indicates if a License is required. Specifies whether the associated element is exempt from withholding taxes. When a seller ships something via common to a buyer in accordance with the Uniform Commerical Code and international legal agreements, you must specify a particular "phrase" that states who assumes the risk of shipment, who is responsible for loading and unloading the goods, where ownership or title to the goods passes, who paid or pays the carrirer, etc. Examples of these "phrases" include: - "FOB Origin Prepaid and Add" (Free On Board - no cost for loading, title passes at seller's dock, seller prepaid freight cost and delivery insurance, seller will freight costs to cost of goods) - "FOB Destination" or "FOB Destination Prepaid" (Free On Board - no cost for loading, title passes at buyer's dock, seller prepaid freight cost and delivery insurance) In software applications, this phrase is commonly split into two coded pieces, a "legal terms" risk and responsibility component for use with common carriers (FOB Destination) and some kind of qu alifying component (Prepaid and Add). Identifies the types associated with the PaymentTerm. References the RFQ noun. Indicates the time period in which the associated component is effective. This is used to describe preferences that will be used to evaluate responses to an RFQ. For example, to identify a preference for sharing CAD data in VRML format the ID = VRML, Type = CAD and Value = 1 or Yes Contains the relevant information about the salesperson and the associated commission information. Indentifies information that is being communicated by the associated object. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Identifies the expected delivery date that is associated with the object. Identifies the follow up date that is associated with the object. The lead time needed for a component item to be able to produce the end item on the required date. Hence requirement date of the consumed item is requirement date of the output item MINUS lead time offset. Probability for winning the associated entity. The incremental cost of the resource. The cost of performing this activity. Activity costs are loaded via the LoadProjectAccounting BOD and rolled up to the Project's TotalCost field. A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Points to the Sales Person""s information that is associated with this component. Identifies the party or location that the payment is to be remitted to or sent to. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Identifies where the note is used and is associated to an Infor defined code list, ''NoteType,'' that indicates the processes that might use the note. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Is the primary document id for the document associated. Is the identifier of the given Line Component within the document A Facility identifies a location within an entity. The facility may have sub-locators identified using a sequenced identification notation e.g. Warehouse A100 Sub-Location 11, Row R10 would be represented as an array of three Facility elements with values as A100, 11, R10, name attribute as Warehouse, Sub-Location and Row and sequence attribute as 1,2 and 3 respectively. Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. The location of a thing, as captured by an address (or addresses), GPS Coordinates, and/or in relation to other locations. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. The customer party's account id. Identifies the contact information for the requesting person, organization, department, or group on the associated document or line. Identifies the contact information of the person, organization, department, or group that planned for the timing of the exchange of goods/services that this document is associated at the document or line level. Identifies the contact information for the buying person, organization, department, or group on the associated document or line. Identifies the contact information of the person, organization, department, or group that is to receive the contents communicated by the document or line. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the creditor. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The name of the entity that created the ID. This is only used when the ID is defined externally and there is no ID for that agency - like for government agencies. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Identifier of the given location within the scope of the integration Identifies the Name of the Location Directions for the given location Address for the given location From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. ### Not supported : The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. ### Not supported : The building or house name on the street that identifies the location. ### Not supported : The street name of the building or house that identifies the location. ### Not supported :The unit of the building or house that identifies the location. ### Not supported : The floor of the building or house that identifies the location. ### Not supported : The post office box that is used for the location. Vanity city name like La Jolla for San Diego The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. This attribute contains the Code List ListID for the code that it is associated with. Address Format Codes This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The sequence number of an address. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. The numeric ranking of this element in a collection of like elements where 1 is the preferred option. Indicates that this element is the prefered element in a collection of like elements. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Channel Code This attribute contains the Code List ListID for the code that it is associated with. Communication Use Codes Holds the lines that make up the address. ### Not supported : The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. ### Not supported : The building or house name on the street that identifies the location. ### Not supported : The street name of the building or house that identifies the location. ### Not supported :The unit of the building or house that identifies the location. ### Not supported : The floor of the building or house that identifies the location. ### Not supported : The post office box that is used for the location. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. The sequence number of this address line. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Contact. Identifies the means of communicating with this contact. Each instance can represent an address, email address, web site or phone number. Identifies the type of contact, such as requester, the buyer, customer service, etc Code that identifies the prefered language of the contact. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Code that identifies the prefered language of the contact. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. The name given to a division of a business specializing in a particular product or service. In this case, it is where the Contact works in. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Code that identifies the prefered language of the contact. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Code that identifies the prefered language of the contact. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. The location of a thing, as captured by an address (or addresses), GPS Coordinates, and/or in relation to other locations. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Identifies the sales contact and sales department/organization that is responsible for the sale that the instance is associated. Identifies the contact information of the person, organization, department, or group that is to shipping the contents communicated by the document or line. Identifies the contact information of the person, organization, department, or group that is responsible for customer service. Identifies the Name of the Location Address for the given location Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. ### Not supported : The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. ### Not supported : The building or house name on the street that identifies the location. ### Not supported : The street name of the building or house that identifies the location. ### Not supported :The unit of the building or house that identifies the location. ### Not supported : The floor of the building or house that identifies the location. ### Not supported : The post office box that is used for the location. The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Sales Contact. Methods of establishing communication with the Sales Contact. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Shipping Contact. Mehods of establishing communication with the Shipping Contact. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the CS Contact. Methods of establishsing communication with the CS Contact. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. The location of a thing, as captured by an address (or addresses), GPS Coordinates, and/or in relation to other locations. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Identifier of the given location within the scope of the integration Identifies the Name of the Location Address for the given location From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. The location of a thing, as captured by an address (or addresses), GPS Coordinates, and/or in relation to other locations. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Identifier of the given location within the scope of the integration Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. Used to indicate if a location is not a physical internal warehouse, but rather one used for tracking direct shipments. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Code that identifies the prefered language of the contact. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Is the identifier of the given Line Component within the document An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The Profit Center is an accumulator of revenue information that may be an organizational unit or area of responsibility. A profit center can be used for internal management control. Profit centers can calculate operating profit using the cost-of-sales accounting and/or period accounting methods A G/L entity is the smallest organizational unit for which individual financial statements must be drawn up according to relevant commercial law. It is normally the primary balancing segment of the GL Account structure. Typically, this is the owning entity for the transaction. Synonyms are Business Unit, Fund, G/L Company, Joint Venture, Non-Profit Association Name When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. The location of a thing, as captured by an address (or addresses), GPS Coordinates, and/or in relation to other locations. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Identifies the contact information of the person, organization, department, or group that planned for the timing of the exchange of goods/services that this document is associated at the document or line level. Identifies the contact information for the buying person, organization, department, or group on the associated document or line. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. Used to indicate if a location is not a physical internal warehouse, but rather one used for tracking direct shipments. Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. ### Not supported : The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. ### Not supported : The building or house name on the street that identifies the location. ### Not supported : The street name of the building or house that identifies the location. ### Not supported :The unit of the building or house that identifies the location. ### Not supported : The floor of the building or house that identifies the location. ### Not supported : The post office box that is used for the location. The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ListID for the code that it is associated with. GenericStatus An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Code that identifies the prefered language of the contact. Contains the set of possible identifiers for an associated Party. This always references the CarrierPartyMaster Noun. Transportation will expect an ID if the carrier is pre-selected. Identifies the Name of the object in which associated. The location of a thing, as captured by an address (or addresses), GPS Coordinates, and/or in relation to other locations. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. This is intended to be used as an override for contact information that is stored in the ContactMaster. Indicates the current state of the associated object. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Tax Identification Number of the creditor. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. Identifies the Name of the Location Address for the given location Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. Used to indicate if a location is not a physical internal warehouse, but rather one used for tracking direct shipments. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ListID for the code that it is associated with. GenericStatus Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. The location of a thing, as captured by an address (or addresses), GPS Coordinates, and/or in relation to other locations. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. true when this location is a valid pick-up location for the web storefront. Used to indicate if a location is not a physical internal warehouse, but rather one used for tracking direct shipments. Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The name of the license that is being used. Is a contractual code used to describe the point where delivery occurs (goods ownership is transferred) in a contract of sale. It identifies the rights and obligations of each partner (supplier, carrier and customer) in the transaction and may specify the requirements to assume ownership (i.e. paying for the cost of the goods and/or transportation). The United Nations Trade Facilitation Information Exchange (UN/TraFIX) has established the following codes (INCOTERMS 1990) for use in international trade to Europe, Asia and the Pacific. (See http://www.unece.org/trade/rec/rec05en.htm). These terms may also be found in the United States Uniform Commercial Code (UCC). EXAMPLES EXW - Ex Works ... (named place) FCA - Free Carrier ... (named place) FAS - Free Along Ship ... (named port of shipment) FOB - Free On Board ... (named port of shipment) CFR - Cost and Freight ... (named port of destination) CIF - Cost, Insurance and Freight ... (named port of destination) CPT - Carriage Paid To ... (named place of destination) CIP - Carriage and Insurance Paid to ... (named place of destination) DAF - Delivered At Frontier ... (named place) DES - Delivered Ex Ship ... (named port of destination) DEQ - Delivered Ex Quay (Duty Paid) ... (named port of destination) DDU - Delivered Duty Unpaid ... (named place of destination) DDP - Delivered Duty Paid ... (named place of destination) To specify inco terms text - for cases where the codes are not sufficient. Identifies the place where the transfer of ownership takes place. Describes how the freight cost for a shipment of goods should be billed. EXAMPLES: Prepaid, Collect,Third Party, Prepaid and Add, Consignee Billed This attribute contains the Code List ListID for the code that it is associated with. Incoterms This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the Transfer Location type that is associated with the Transportation Term. This attribute contains the Code List ListID for the code that it is associated with. Freight Terms The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A code used to uniquely a payment term. Identifies the Term conditions for due date. Due date could be specified directly or with a payment date basis code and a duration or with prox terms. Identifies the Discount the time and number of payments and the amount or percentage of the discount from the payment. Identifies the Peanlty what happen when the time and number of payments and the amount or percentage of the penalty to add to the payment. This indicates the dates at which payments are made by one party to another. Identifies the types associated with the PaymentTerm. The sequence attribute is used for the ordering when PaymentTerm@type=''Installment''. Other types of Payment Term do not require any sequence. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. ## Not supported. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions ## Not supported. Date and time this document becomes effective The date and time that the associated object is to be completed. The date and time when the payment terms go into effect. Used in conjunction with NumberOfDays Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Preferred method of defining Prox Terms. This element repeats allowing multiple Prox periods to be defined. Code defining the amount from the document to use as the basis amount. (For example, total or extended) The amount due based on the terms code expressed in the transaction currency. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. ## Not supported. For new integrations or updates, this element should not be used. The element with the same name under Proximo should be used. The number of months beyond the Billing Date in which payment is due. ## Not supported. For new integrations or updates, this element should not be used. The element with the same name under Proximo should be used. The day within the ProxMonth beyond the Billing Date in which payment is due. ## Not supported. For new integrations or updates, this element should not be used. The element with the same name under Proximo should be used. The daywithin the ProxWeek beyond the Billing Date in which payment is due. ### Not supported. The type that is associated with this grouping of terms. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. ### Not supported. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. ### Not supported. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This attribute contains the Code List ListID for the code that it is associated with. Payment Basis The day of the month that is the cut-off for the prox period. For example, assuming that all invoices generated before the 10th of the month are due on the 20th, the ProxCutOff would be 10. The number of months beyond the Billing Date in which payment is due. The day within the ProxMonth beyond the Billing Date in which payment is due. The day within the ProxWeek beyond the Billing Date in which payment is due. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The date and time that the order is to be completed. The date and time when the payment terms go into effect. Used in conjunction with NumberOfDays Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Preferred method of defining Prox Terms. This element repeats allowing multiple Prox periods to be defined. Code defining the amount from the document to use as the basis amount. (For example, total or extended) The amount of discount allowed expressed in the transaction currency. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. This attribute contains the Code List ListID for the code that it is associated with. Payment Basis This attribute contains the Code List ID for the codes that are associated with corresponding entity. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The date and time that the order is to be completed. The date and time when the payment terms go into effect. Used in conjunction with NumberOfDays Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Preferred method of defining Prox Terms. This element repeats allowing multiple Prox periods to be defined. Code defining the amount from the document to use as the basis amount. (For example, total or extended) The penalty amount in the transaction currency. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Identifies the Terms i.e. the time and number of payments and the amount or percentage of the payment. Identifies the Discount the time and number of payments and the amount or percentage of the discount from the payment. Identifies the Peanlty what happen when the time and number of payments and the amount or percentage of the penalty to add to the payment. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. ## Not supported. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions ## Not supported. Date and time this document becomes effective The date and time that the associated object is to be completed. The date and time when the payment terms go into effect. Used in conjunction with NumberOfDays Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Preferred method of defining Prox Terms. This element repeats allowing multiple Prox periods to be defined. Code defining the amount from the document to use as the basis amount. (For example, total or extended) Used to indicate the payment schedule amount. Either the amount or percent could be used to define the schedule amount. The amount due based on the terms code expressed in the transaction currency. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. ## Not supported. For new integrations or updates, this element should not be used. The element with the same name under Proximo should be used. The number of months beyond the Billing Date in which payment is due. ## Not supported. For new integrations or updates, this element should not be used. The element with the same name under Proximo should be used. The day within the ProxMonth beyond the Billing Date in which payment is due. ## Not supported. For new integrations or updates, this element should not be used. The element with the same name under Proximo should be used. The daywithin the ProxWeek beyond the Billing Date in which payment is due. ### Not supported. The type that is associated with this grouping of terms. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Identifies the Release Number in the case of Blanket POs Is the identifier of the given Line Component within the document An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Indicates the type of the object in which assoicated. Identifies a numeric weight value applied to that qualification term (to imply the importance of compliance). Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Qualification Terms This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Holds the IDs associated with the Sale Organization. Contains basic information associated with SalesPerson such as ID and Name. The monetary value of the object in which the amount is associated Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Is the total Amount of the Order. Is the quantity of a material or product ordered by the customer. OED: A rate, number or proportion in each hundred. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Methods of establishing communication with the Sales Person. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the type of the object in which assoicated. Identifies the reason for an activity This attribute contains the Code List ListID for the code that it is associated with. Message Types The monetary value of the object in which the amount is associated Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Indicates the PerQuantity side of this Amount. Typically, this value is 1 with a uom of each, meaning that, e.g., a UnitPrice with the Amount 1.29 would be the price per each or simply $1.29 each. For pricing wire, the UnitPrice Amount might be $7.00 with a PerQuantity of 100 and a uom of LinearFeet, meaning the unit price would be $7 per 100 linear feet. Element for the communication of all codes. An explicit period of time for the bucket. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ListID for the code that it is associated with. Unit Cost Codes The timestamp marking the beginning of a time period during which a related entity. The timestamp marking the ending 1of a time period during which a related entity. The monetary value of the object in which the amount is associated Monetary amount used for consolidation at tenant level. Identifies the exchange rate between two currencies Monetary amount used for consolidation at accounting entity level. The source Currency Code for the monetary amount to be converted. Specifies the unit base of the source currency for currencies with small denominations. The target Currency Code for the monetary amount to be converted. Specifies the unit base of the target currency for currencies with small denominations. Is the multiplier appied to the base amount or the base quantity in order to calculate the amount. Indicates the time period in which the associated component is effective. This attribute contains the Code List ListID for the code that it is associated with. Currencies This attribute contains the Code List ListID for the code that it is associated with. Currencies A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type associated with this group of classifications. Element for the communication of all codes. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. Identifies the Role of the SalesPerson. This attribute contains the Code List ListID for the code that it is associated with. Sales Person Roles Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. The location of a thing, as captured by an address (or addresses), GPS Coordinates, and/or in relation to other locations. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Identifier of the given location within the scope of the integration Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. Classification of the location in one or more of the groups defined below Used to indicate if a location is not a physical internal warehouse, but rather one used for tracking direct shipments. Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type of Classification of the Location. The code value for the dimension identified in the code list. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This is the name of one of Dimensions that are maintained by the Code Fortress. These can be user defined or provided by Infor. Known dimensions that will be available on all systems and should be mapped to by implementing systems include: Department Is the identifier of the given Line Component within the document Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Indicates the current state of the associated object. Identifies the Item associated with the Line or Detail of a transaction. The item provides the details of the generic Item component information. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. quantity of the associated service or item that is addresses by the component in which the quantity is distributed. Indicates if the item is configurable. Unit price of the item for the number of items in the unitCode specified in the PerQuantity elements. In most cases the unitCode of the PerQuantity is the same as the unitCode of the Quantity element above. Is an amount not including taxes or charges. In the case of orders, this is typically the Unit Price times the Order Quantity. This is represented in the transaction currency. Indicates the total amount of the object associated. This includes the Price and the total of all the charges, allowances and taxes. This is represented in the transaction currency. Indicates the total amount of the object associated. This includes the Price and the total of all the charges, allowances and taxes. This is represented in the base currency. Indicates the total amount of the object associated. This includes the Price and the total of all the charges, allowances and taxes. This is represented in the report currency. This indicates the date the order line is canceled if not shipped. This indicates the date the order line is canceled if not delivered. This indicates the earliest possible date at which a shipment can be made for the line item. This indicates the earliest possible date at which a delivery can be made for the line item Indicates the date in which the buyer/customer requests the order to be shipped. Indicates the date in which the buyer/customer requests the order to be delivered. When an “earliest�? date/time is given, it is the latest date/time the customer wants the order delivered. This indicate whether another item can be used if the original item is not available. Identifies the ShipToParty for the document or the line. Identifies if a partial shipment is allowed. Indicates whether the order can be drop shipped or not. Communicates if it is permitted to ship a good or service prior to the date it is due. Valid values are ""false"" for early shipment not allowed, and ""true"" for early shipment allowed. Indicates if a License is required. When a seller ships something via common to a buyer in accordance with the Uniform Commerical Code and international legal agreements, you must specify a particular "phrase" that states who assumes the risk of shipment, who is responsible for loading and unloading the goods, where ownership or title to the goods passes, who paid or pays the carrirer, etc. Examples of these "phrases" include: - "FOB Origin Prepaid and Add" (Free On Board - no cost for loading, title passes at seller's dock, seller prepaid freight cost and delivery insurance, seller will freight costs to cost of goods) - "FOB Destination" or "FOB Destination Prepaid" (Free On Board - no cost for loading, title passes at buyer's dock, seller prepaid freight cost and delivery insurance) In software applications, this phrase is commonly split into two coded pieces, a "legal terms" risk and responsibility component for use with common carriers (FOB Destination) and some kind of qu alifying component (Prepaid and Add). Identifies the types associated with the PaymentTerm. References the RFQ noun. Indicates the time period in which the associated component is effective. Indicates the date in which the associated object was promised to be shipped from the supplier. This field allows either the date only or both date and time to be provided. Default is date only. Indicates the date in which the associated was promised to be delivered to the customer or consumer. This field allows either the date only or both date and time to be provided. Default is date only. Indicated the flexibility in the required delivery date that is allowed by the requestor Contains the relevant information about the salesperson and the associated commission information. Indentifies information that is being communicated by the associated object. The Component Subline represents any additional information concerning the product on the Line. The Subline can be used to describe a specific configuration of the ordered item. Indicates the schedule for the delivery of this line item. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. References the Opportunity noun. Probability for winning the associated entity. The incremental cost of the resource. Flag that indicates that the item has a fixed price. Flag that indicates that the item is expensable. Number of inventory items that have been allocated for other uses as such are no longer availble. Unless the allocation is overriden. The unit quantity factor is a simple field with a numeric value that enables a conversion rate to the unit quantity of a line item Contains the set of information about a Supplier Party necessary to execute and administer orders or requests. Identifies the party that the goods or services are being shipped or sent from. Identifies the party or location that the payment is to be remitted to or sent to. The entity that is responsible for Buying the document or element in which it is associacted. References the PurchaseOrder noun. Represents the different Charges that may be applied to the associated document. A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. This offers the customer a special price if their order quantity meets the specified amount. Base Currency Amount Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Electronic Product CodeLike the Universal Product Code (UPC) or bar code, the Electronic Product Code(EPC) is the fundamental identifier for a physical object in a EPC Network. The EPC identifies the manufacturer, product, version and serial number, and uses an extra set of digits to identify unique items. The EPC Tag Data Standards Specification Version 1.1 defines the encoding of the Electronic Product Code onto the RFID chip, as well as how it is encoded for use in the information systems layer of the EPC Network (for example the RFID Information Server). GTIN describes a family of GS1 (EAN.UCC) global data structures that employ 14 digits and can be encoded into various types of data carriers. Currently, GTIN is used exclusively within bar codes, but it could also be used in other data carriers such as radio frequency identification (RFID). The GTIN is only a term and does not impact any existing standards, nor does it place any additional requirements on scanning hardware. For North American companies, the UPC is an existing form of the GTIN. Identifies if the Item is a Service. Describes the associated item. description by which each customer or supplier knows this item This identifies the classification of an entity. An entity may be classified into mulitple groups for different reasons. Examples of Classification include Commodity Codes, Freight Classifications, Product Line classifications and so on. Suggested Values are COMMODITY, FREIGHT, PRODUCTLINE. Identifies the specification of an entity. radio frequency identifier (RFID) Unique serial number assigned to the given item instance by the manufacturer. Is the Lot and Serial numbers for the items contained in the associated component by identifing the number of items and the uniques serial number of those items that belong to a given Lot. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. Valid values for the Item are Customer, Supplier, Manufacturer, SKU, and Duplicate. The ID of the entity that created the ID. When the schemeName is ""Customer"" or ""Supplier"" then this value is the ID of the customer or supplier. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Identifies the type of party: Customer, Supplier, or Manufacturer. ID of Party Accounting entity of Party This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The identifier for a specification. This does not point to another noun and does not use the accounting entity, location or lid attributes. Represents the Properties or Features of the associated entity A code used to indicate if this specification is used to define a minimum, maximum, or target value. An indicator used to identify Specifications that are likely not of interest to an ERP system. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is used to describe the quantity of an item. The quantity of the item in the Base UOM. Identifies the Lot that a given Item Instance belongs to. Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Unique serial number assigned to the given item instance by the manufacturer. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Identifies the method used for selecting the lot for an item. Standard values are ‘Any’, ‘Same’, or ‘Specific’ Quantity of items required to fill the lot. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Holds ID information associated with the Item's Lots. Indicates the time period in which the associated component is effective. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Unique serial number assigned to the given item instance by the manufacturer. radio frequency identifier (RFID) Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Represents the identifier of the country of origin of an item, service or shipment Country of Origin information including a country code and a percentage. A code defined for a specific industry that indicates the countries of origin and amounts in a single code. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ListID for the code that it is associated with. Countries Country in which the Address exists. The list of values is specified in ISO 3166-2. The percentage of the item that comes from the specific country This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Element for the communication of all codes. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions This attribute contains the Code List ListID for the code that it is associated with. Disposition Codes When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the Line Number of the given Line Coponent within the document. LineNumbers are assigned by the sending system. References the project associated with the cost peg. quantity distribution associated with respect to date and time Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The unit-of-measure (UOM) code associated with a quantity. The monetary value of the object in which the amount is associated Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Used to aggregate cost data for reporting References the project associated with the cost peg. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifier of the cost pegged Project Activity. cost pegged Project Element Identifies the Type of project that is being referenced. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Identifier of the cost pegged Project Element. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Is the primary document id for the document associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The monetary value of the object in which the amount is associated Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Indicates the PerQuantity side of this Amount. Typically, this value is 1 with a uom of each, meaning that, e.g., a UnitPrice with the Amount 1.29 would be the price per each or simply $1.29 each. For pricing wire, the UnitPrice Amount might be $7.00 with a PerQuantity of 100 and a uom of LinearFeet, meaning the unit price would be $7 per 100 linear feet. Element for the communication of all codes. This attribute contains the Code List ListID for the code that it is associated with. Unit Price Codes Is a contractual code used to describe the point where delivery occurs (goods ownership is transferred) in a contract of sale. It identifies the rights and obligations of each partner (supplier, carrier and customer) in the transaction and may specify the requirements to assume ownership (i.e. paying for the cost of the goods and/or transportation). The United Nations Trade Facilitation Information Exchange (UN/TraFIX) has established the following codes (INCOTERMS 1990) for use in international trade to Europe, Asia and the Pacific. (See http://www.unece.org/trade/rec/rec05en.htm). These terms may also be found in the United States Uniform Commercial Code (UCC). EXAMPLES EXW - Ex Works ... (named place) FCA - Free Carrier ... (named place) FAS - Free Along Ship ... (named port of shipment) FOB - Free On Board ... (named port of shipment) CFR - Cost and Freight ... (named port of destination) CIF - Cost, Insurance and Freight ... (named port of destination) CPT - Carriage Paid To ... (named place of destination) CIP - Carriage and Insurance Paid to ... (named place of destination) DAF - Delivered At Frontier ... (named place) DES - Delivered Ex Ship ... (named port of destination) DEQ - Delivered Ex Quay (Duty Paid) ... (named port of destination) DDU - Delivered Duty Unpaid ... (named place of destination) DDP - Delivered Duty Paid ... (named place of destination) To specify inco terms text - for cases where the codes are not sufficient. Identifies the place where the transfer of ownership takes place. Describes how the freight cost for a shipment of goods should be billed. EXAMPLES: Prepaid, Collect,Third Party, Prepaid and Add, Consignee Billed An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the Transfer Location type that is associated with the Transportation Term. The name of the person to whom this document would be intended. Holds the lines that make up the address. ### Not supported : The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. ### Not supported : The building or house name on the street that identifies the location. ### Not supported : The street name of the building or house that identifies the location. ### Not supported :The unit of the building or house that identifies the location. ### Not supported : The floor of the building or house that identifies the location. ### Not supported : The post office box that is used for the location. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Identifies the Release Number in the case of Blanket POs Is the identifier of the given Line Component within the document Is the amount of time under the intended target time or date that is allowed. Is the amount of time over the intended target time or date that is allowed. Is the identifier of the given Line Component within the document Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Is the identifier of the given Line Component within the document Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. The location of a thing, as captured by an address (or addresses), GPS Coordinates, and/or in relation to other locations. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Contacts are the point of communication with the given party. In the case of an organization it may be the requestioner, the buyer, customer service, etc. Identifies the contact information for the requesting person, organization, department, or group on the associated document or line. Identifies the contact information of the person, organization, department, or group that planned for the timing of the exchange of goods/services that this document is associated at the document or line level. Identifies the contact information for the buying person, organization, department, or group on the associated document or line. Identifies the contact information of the person, organization, department, or group that is to receive the contents communicated by the document or line. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the creditor. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. Identifier of the given location within the scope of the integration The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. Classification of the location in one or more of the groups defined below true when this location is a valid pick-up location for the web storefront. Used to indicate if a location is not a physical internal warehouse, but rather one used for tracking direct shipments. Status to determine if a location is Pending, Active, Unavailable or Inactive. Pending is not available yet. Active is available. Unavailable is temporarily unavailable. Inactive is no longer available. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Is the primary document id for the document associated. Identifies the Release Number in the case of Blanket POs Is the identifier of the given Line Component within the document Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Is the base amount from which the charge/allowance is derived. The quantity upon which the charge is calculated. This is only used when the charge is based upon a quantity. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The monetary value of the object in which the amount is associated Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Allows the sender to indicate how the Charge/Allowance was calculated. Identifies the reason for an activity Identifies the exchange rate between two currencies An explicit period of time for the bucket. Identifies the Name of the object in which associated. Indicates the tax for the object associated. The basis amount for each quantity of 1 of the unit of measure. The amount of the adjustment for each quantity of 1 of the unit of measure. A code used to identify the purpose of an adjustment. Could include codes for non-itemized and pre-tax. A code used group charges or allowances together to simplify posting for those systems that cannot or do not support a full range of adjustments. Identifies how the object being referenced is to be calculated. This is the unit of measure code that is assigned to this package. This must be unique within the item/supplier. Specifies the currency rate of the object in which it is associated. Used by pricing to indicate that the calculation is based on the gross weight rather than the net weight. Identifies the type of charge that the given instance of Charge/Allowance. sequence in which charge occurred. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the multiplier appied to the base amount or the base quantity in order to calculate the amount. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions This attribute contains the Code List ListID for the code that it is associated with. Reasons for Charge An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Defines the tax authority to which taxes must be paid. The determining location is the location to which the asset was delivered. The taxable amount for this tax jurisdiction expressed in the transaction currency. The taxable amount for this tax jurisdiction expressed in the base currency. The taxable amount for this tax jurisdiction expressed in the report currency. The quantity used for calculating the tax in the transaction unit of measure. The quantity used for calculating the tax in the base unit of measure. Allows the sender to indicate how the Charge/Allowance was calculated. Uniquely identifies the exemption along with the agency that defines the excemption. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions This is used to represent the tax amount for this jurisdiction in the currency of the taxing authority. The amount of tax payable on this transaction for this jurisdiction expressed in the transaction currency. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Identifies the sequence of how the taxes must be applied. Indicates that tax code of the tax being represented by the given instance of tax. Possible values are: Sales Tax, Use Tax, VAT Element for the communication of all codes. This attribute contains the Code List ListID for the code that it is associated with. Tax Jurisdiction Codes An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Exemption Code Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note The amount of this transaction that is exempt from tax by this jurisdiction expressed in the transaction currency. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. This attribute contains the Code List ListID for the code that it is associated with. Adjustment Types This attribute contains the Code List ListID for the code that it is associated with. Adjustment Groups This attribute contains the Code List ListID for the code that it is associated with. Calculation Methods This attribute contains the Code List ListID for the code that it is associated with. Rate Types This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The customer's actual requested amount of the item to be shipped. Unit price of the item for the number of items in the unitCode specified in the PerQuantity elements. In most cases the unitCode of the PerQuantity is the same as the unitCode of the Quantity element above. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Amount for a specific type in the base or book currency. The type is identified by the type code and can include Total, Extended and other amount types. ExtendedAmount, TotalAmount Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Identifies where the note is used and is associated to an Infor defined code list, ''NoteType,'' that indicates the processes that might use the note. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it.