Identifies everything know about an item. Information at the header level applies to all locations unless indicated differently at a given location. Identifies the Item information that is specific to a location. For example a plant or site may keep different information about an item than the corporate office. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Electronic Product CodeLike the Universal Product Code (UPC) or bar code, the Electronic Product Code(EPC) is the fundamental identifier for a physical object in a EPC Network. The EPC identifies the manufacturer, product, version and serial number, and uses an extra set of digits to identify unique items. The EPC Tag Data Standards Specification Version 1.1 defines the encoding of the Electronic Product Code onto the RFID chip, as well as how it is encoded for use in the information systems layer of the EPC Network (for example the RFID Information Server). GTIN describes a family of GS1 (EAN.UCC) global data structures that employ 14 digits and can be encoded into various types of data carriers. Currently, GTIN is used exclusively within bar codes, but it could also be used in other data carriers such as radio frequency identification (RFID). The GTIN is only a term and does not impact any existing standards, nor does it place any additional requirements on scanning hardware. For North American companies, the UPC is an existing form of the GTIN. A reference tot he person that took the action that caused this BOD to be published. Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note description by which each customer or supplier knows this item Classification of the product in one or more of the groups defined below Identifies the specification of an entity. Reference to a ProjectMaster noun Indicates whether the item is hazardous. When set to ""true"", the element ""HazardousMaterial"" might contain the relevant details Complex element that contains information about the hazardous material ratings of the item(s). Valid options are blank or null, Prebuilt, BODKit, or MRO. Most items will be have a blank or a null. Prebuilt is for kits that are already assembled. These items come with a list of components that can be used to decompose the item into its component parts. BODKit is for kits that are built on demand. These items come with a list of components that can be used to assemble the kit. MRO is used for items that are typically used for MRO operations but act in every other way like normal items. Indicates whether the ItemQuantity is a fixed size and does not scale along with the quantity of the BOM or Routing being produced Is the maximum number of items that can be put into a lot for this Item. Is the minimum number of items that can be put into a lot for this Item, duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. These components are ordered in their significance by their order of appearance i.e. as year, month, day, hour, minute, and second. Indicates if the associated quantities are backflushed raqther than being tracked directly. Default is true. Set to false for non-stock products. Indicates if this item is considered scrap. Indicates the state of the item. These values come from ItemStatus code list. The ISO code that defines the base UOM for this product. The ISO code that defines the storage UOM for this product. This UOM, if different from the base UOM must be referenced in the PackagingUnit section of this document. The ISO code that defines the shipping UOM for this product. This UOM, if different from the base UOM must be referenced in the PackagingUnit section of this document. The datetime on which the object was last modified. Identifies the packaging that the company generally references the Item in. ### Not supportedThis identifies a set of related UOM's and their conversions from the Item's UOMIs a UOMGroup Identifier, that identifies a set of related UOM's and their conversions from the Item's UOM provides a list of codes that identifies the capabilities and features of the associated object Identifies the alternate Units of measure that can be used for this item. No listID attribute is required for this code since it uses the same list as the unitCode attribute. Each alternate UOM identified here must have a UOMCodeConversion element to define the conversion factor. This is not intended to be used when there are multiple packages that contain the same item, but when the item can be measured in two separate measures such as eaches and pounds. The UOM here represents the alternate UOM. The the Mulitplier determines the conversion between the parent UOM and the UOM specified here in the allternate UOM. Multiple instances may be used. This is a reference amount and the amount used by PLM for formula optimization. Drawing Attachment allows drawings to be attached to a Noun or Component. A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. The Attachment represents binary data files that may be included within a BOD. These files replace the paper specifications and drawings attached to a BOD definition to clearly communicate design requirements. This Data Type is optional. Attachment usage is further defined by its position. Is the reference to the supplier contract information. Is the reference to the buyer contract information. Qualifies goods for purposes of freight cost calculation. An example would the qualifications used by National Motor Freight Carriers. EXAMPLE: National Motor Freight Carriers (NMFC) Class Code - Based on an evaluation of density, stowability, ease of handling and liability, the commodities are grouped into one of 18 classes. Indicates if the item is a serialized item i.e. unique instances of the item are identified by unique serial numbers. Valid values are true and false. Indicates if the item is a lotted item. Valid values are true and false Indicates if the item is configurable. Is the GLAccount for the associated document and component. The date that document was created within the system of record. Indicates that an ITEM requires special processing to determine the actual net or gross weight during certain inventory operations. Shelf life is the length of time that food, drink, medicine, chemicals, and many other perishable items are given before they are considered unsuitable for sale, use, or consumption. duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. These components are ordered in their significance by their order of appearance i.e. as year, month, day, hour, minute, and second. The best by date is only advisory and refers to the quality of the product These dates are intended to help keep track of the stock in stores. Food that has passed its sell by or display until date, but is still within its use by / best before will still be edible, assuming it has been stored correctly. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. The default warehouse in which the item is stored. Worldwide regulations to limit the use of hazardous chemical substances in electronic equipment preventing environmental pollution To record technical information about the product structure or to carry out cost-price calculations. Indicates if this item is available to be sold. The default is true Indicated that this item can be produced. Indicates that this item may be purchased. Indicates that this item may be stored in a warehouse. Identifies the various packaging configurations that are available for an item. Holds procurement information associated with the item. Container for Item information that may vary by supplier. Item type for plan items. For example, Item or Family. Related to Item Planning Level. When one item is no longer available it can be superceded by another item or a collection of items as in an assembly. specifies the items that can be used for substitution. Identifies everything know about an item. Information at the header level applies to all locations unless indicated differently at a given location. Defines the components that are requred to make an instance of a kit item. To specify BuyerPerson To specify PlannerPerson To specify ShopFloorPlanner person An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. This value in conjunction with the ID and the schemeAgencyID must uniquely identify the item in the enterprise. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. Valid values for an Item are: Customer, Supplier, Duplicate, and NonStock The ID of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this item. This is the Logical ID (LID) of an application instance, or the enterprise ID for a customer, manufacturer, owner or supplier. An owner will be carried as a customer in CustomerPartyMaster. A manufacturer will be carried as a supplier in SupplierPartyMaster. The name of the System, Owner, Customer, Manufacturer or Supplier that uses this ID to reference this product The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for langauge codes other than 'en-us' when this field is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Original author for this note. Creation date and time for this note. Open, or Closed. NoteTypeCode as managed by the Public MDM. This indicates the purpose and printability of the note. More information can be found at: http://wiki.infor.com/confluence/display/Messaging/Common+Message+Elements This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Identifies the type of party: Customer, Supplier, or Manufacturer. ID of Party Accounting entity of Party Type of description. The same as the type on the standard description. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Type of classifications - InventoryCharacteristics should be used to identify the collection of codes used for inventory characteristics. The code value for the dimension identified in the code list. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This is the name of one of Dimensions that are maintained by the Code Fortress. These can be user defined or provided by Infor. Known dimensions that will be available on all systems and should be mapped to by implementing systems include: CostCenter, ItemType – User defined type, ItemCode – GL Interface, ItemClass –, ProductLine -, MROClass - Type of, SICCode –, ABCCode – Usage, VelocityCode, Style, Size, Color, UseCode, UNSPSC, CommodityCode, Market, ItemGroup, ItemPriceGroup, ItemDiscountGroup, ItemRebateGroup, PlanningGroup, BuyingGroup, ToolType, CostMethod, CostPolicy. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The identifier for a specification. This does not point to another noun and does not use the accounting entity, location or lid attributes. Represents the field values, name and type of the information that needs to be communicated. A code used to indicate if this specification is used to define a minimum, maximum, or target value. An indicator used to identify Specifications that are likely not of interest to an ERP system. Identifies the Type of specification that is associated with the Item. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The value associated to the name. For instance if the Name is MaxPH then this would contain the value for the maximum allowable ph value. The description of this specification. A freeform note Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties The name of the specification. This can be a specific test or value that is required for this item. This is one of the currenly used datatypes exclusive of CodeType that are identified on the wiki at: http://wiki.infor.com/confluence/display/Messaging/Data+Types The unit code that is used with the value to further define it when the type is a measure type. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Original author for this note. Creation date and time for this note. Open, or Closed. NoteTypeCode as managed by the Public MDM. This indicates the purpose and printability of the note. More information can be found at: http://wiki.infor.com/confluence/display/Messaging/Common+Message+Elements This is required for langauge codes other than 'en-us' when this field is used. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the Type of project that is being referenced. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an hazardous material. This is an ID provided by an external agency. Used to identify a Medical First Aid Guide (MFAG) for hazardous substance. Technical name means a recognized chemical name or microbiological name currently used in scientific and technical handbooks, journals, and texts. Generic descriptions are authorized for use as technical names provided they readily identify the general chemical group, or microbiological group. Examples of acceptable generic chemical descriptions are organic phosphate compounds, petroleum aliphatic hydrocarbons and tertiary amines. For proficiency testing only, generic microbiological descriptions such as bacteria, mycobacteria, fungus, and viral samples may be used. Trade names may not be used as technical names. The placard endorsement that is to be shown on shipping papers for hazardous materials. Can also be used for the number of the orange placard (lower part) require on transport. The placard notation that is to be shown on shipping papers for hazardous materials. Can also be used for the number of the orange placard (upper part) require on transport. Specifies the level of marine pollution for this hazardous substance. IMDG Code A code identifying the Inhalation Toxicity Hazard Zone for the hazardous substance, this is generally identfied by a government agency in the United States this is provided by the US Department of Transportation. FlashpointTemperature is related to hazadous substances or goods, indicates the temperature at which the associated substance of goods become flammable, explossive or toxic. This can be repeated so that the description of the haxardous nature of this material can be written in multiple languages. Material Sagfety Data Sheet The quantity of this item that must be spilled to consider the spill hazardous. The percentage of the active ingredient in the final product The Chemical Abstracts Service assigns these numbers to every chemical that has been described in literature. Code of Federal Regulations packaging code - Title 49 Part 173. (Examples: I, II or III) When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for langauge codes other than 'en-us' when this field is used. This is required for langauge codes other than 'en-us' when this field is used. This is required for langauge codes other than 'en-us' when this field is used. This attribute contains the Code List ListID for the code that it is associated with. Hazardous Materials - Marine Pollution Levels This attribute contains the Code List ListID for the code that it is associated with. Toxicity Zones The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This is required for langauge codes other than 'en-us' when this field is used. The sheet number for the sheet that describes the hazard of this material and the proper method of treatment. Last date this document was published. Link to an on-line version of the MSDS document The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ListID for the code that it is associated with. Item Types The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Element for the communication of all codes. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions date and time this document becomes effective Identifies the reason for an activity Text description for reason for status code. This can be repeated so the reason can be represented in multiple languages. An explicit period of time for the bucket. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Used to indicate that the BOD has been archived. This attribute contains the Code List ID for the codes that it are associated with corresponding entity. ItemStatus This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that it are associated with corresponding entity. Item Status Reason This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The timestamp marking the beginning of a time period during which a related entity. The timestamp marking the ending 1of a time period during which a related entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note packaging code for the standard package type Provides the dimensions of the associated component. The UPC code that specifies this item in this pack. Is the number of instances of the item in the base unit of measure contained within the unit package. The BaseUOM must be defined if this element is used. Is the maximum number of instances of an item in the unit of measure that maybe contained within the package. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ListID for the code that it is associated with. Unit Packaging Types Indicates the width of an object Indicates the length of an object Indicates the Height of an object Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type of dimensions being used. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ListID for the code that it is associated with. UPC Packing Levels The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Provides the unit of measure and packaging details that is being converted from. Number of packages of the FromUOMPackage that are multiplied by the rate to create 1 of the ToUOMPackage. ConversionFactor The UOM here represents the alternate UOM. The the Mulitplier determines the conversion between the parent UOM and the UOM specified here in the allternate UOM. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note The BaseUOMCode or other applicable UOM code attached to a standard UOM or to one of the packages defined in the PackageUnit. Identifies the packaging that the company generally references the Item in. This attribute contains the Code List ListID for the code that it is associated with. UOM Codes An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. One of the alternate UOM codes. Indicates the value per quantity of the item. Represents the value of the item to the owning organization. Is the methodology by which the value of an item is determined. Values are:Standard, Replacement or Budget. Indicates the time period in which the associated component is effective. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note The reference cost of the item, this could be base cost or some other fixed cost amount. Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. default is 1 EA if this element is missing The code for the currency associated with an amount. The code for the currency associated with an amount. The code for the currency associated with an amount. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ListID for the code that it is associated with. Costing Methods The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. llows a reference to an ISBN. File name for embedded data. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note File type for the embedded data. The schema says the cardinality is 0 to many, but we are only allowing a single instance inside Infor. The size of the file in bytes, or kilobytes An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Identifies where the note is used and is associated to an Infor defined code list, ''NoteType,'' that indicates the processes that might use the note. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. FileType The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the primary document id for the document associated. Is the identifier of the given Line Component within the document A Facility identifies a location within an entity. The facility may have sub-locators identified using a sequenced identification notation e.g. Warehouse A100 Sub-Location 11, Row R10 would be represented as an array of three Facility elements with values as A100, 11, R10, name attribute as Warehouse, Sub-Location and Row and sequence attribute as 1,2 and 3 respectively. Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates the name of the File being referenced. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A free form note. The lang attribute identifies the language that the note is in. The author identifies the author of the note. The enrtyDate indicates the date the note was entered or last modified. Identifies the type of the file type of the attachment. Specifies how big the file is. Is the title of the person. For example Dr.. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the release of the contract The line number of the given line component within the document Is the schedule line number of a particular item of interest for the DocumentReference. Is the SublineNumber of a particular item of interest for the given DocumentReference An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The ID of the location that is associated with this ID when applicable. . Used with the global ID- no schemeNameAttribute. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the release of the contract The line number of the given line component within the document Is the schedule line number of a particular item of interest for the DocumentReference. Is the SublineNumber of a particular item of interest for the given DocumentReference A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Element for the communication of all codes. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This is the name of one of Dimensions that are maintained by the PublicMDM. These can be user defined or provided by Infor, OAGIS, etc%E2?%A6; Freight Classes An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Person who created the note This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Is the primary account classification within a chart of accounts. For example reveune, Fixed Asset, Land, Buildings, etc. The name associated with this account. This element will likely not be used by existing ERP systems. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The name of the AccountingChart An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the current state of the associated object. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. A unique identifier for a package configuration Contains the set of information about a Supplier Party necessary to execute and administer orders or requests. Is the organization that is the end customer of the goods or services being provided in the associated transaction. Identifies the Name of the object in which associated. Unit of measure code assigned to this configuration. When combined with the SupplierParty/ID this must be unique for each item. The ID of the HandlingGroup, the collection of packages that can be used to ship this item. The string that is translated into a barcode to uniquely identify this item. It is recommended, but not required that this string contain only numeric values as they are supported by more scaning devices and barcode styles. Holds information regarding the package that is the inner pack of the associated package. Quantity for the Base UOM. This is the reference to the source. This can be a reference to a Location (with a plant or warehouse type) of the type specified by the Procurement Method, or a Supplier. Provides the dimensions of the associated component. The Tare weight is the weight of the packaging when empty (in the case of a pallet the weight of the empty pallet) that when subtracted from the Gross weight results in the Net weight. The net weight is calculated by subtracting the tare weight or the weight of the container from the GrossWeight. The total weight of the entity without reduction of packaging or container. I.e The Gross wieght of a pallet of goods includes the weight of the pallet. Quantifies the volume, or amount of space, that is occupied by an item, container or shipment. Identifies the code that is associated with the package level that the UPC is designated to. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the creditor. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. System The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The name of the entity that created the ID. This is only used when the ID is defined externally and there is no ID for that agency - like for government agencies. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Channel Code This attribute contains the Code List ListID for the code that it is associated with. Communication Use Codes Holds the lines that make up the address. ### Not supported : The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. ### Not supported : The building or house name on the street that identifies the location. ### Not supported : The street name of the building or house that identifies the location. ### Not supported :The unit of the building or house that identifies the location. ### Not supported : The floor of the building or house that identifies the location. ### Not supported : The post office box that is used for the location. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. The sequence number of this address line. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. The numeric ranking of this element in a collection of like elements where 1 is the preferred option. Indicates that this element is the prefered element in a collection of like elements. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the creditor. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The ID of the package configuration that is used to build up this configuration. If the inner pack is the baseUOM then this element is not used. The number of the inner pack items that are used to make this configuration. The unit code associated to the inner pack. The number of the inner packs that go in a layer on the pallet. The number of layers that can be used when building a pallet of these package configurations. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Valid values are: Manufacture, Purchase, Transfer This is the reference to the source. This can be a reference to a Location (with a plant or warehouse type) of the type specified by the Procurement Method, or a Supplier. True if this supply source has been approved. False if it is only in planning. Used for determining the sequence in which the sources are used. The percentage of this item to be procured from this source. When true the associated procurement parameters define the default procurement method. E.g. economic order quantity, fixed order quantity, min/max, etc. Indicates the time period in which the associated component is effective. The quantity by which an order quantity can be increased. The quantity that may be ordered when the quantity for an order is fixed. The quantity that may be ordered when the quantity for an order is fixed. The smallest quantity that may be ordered of this item. The smallest quantity of this item that may be ordered as stated in the base UOM for this item. The maximum quantity of this item that may be ordered. The maximum quantity of this item that may be ordered as stated in the base UOM for this item. This is the code for the planning method used for this item for a location. This will use the dimension PlanningMethod. The list of valid planning methods will be made available in the documentaiton. There should be the ability to turn off codes that are not available for the implemented package The quantity of this item at which the purchasing system should include this item in a purchase plan for the purposes of making a planned buy The quantity of this item at which the purchasing system should include this item on an emergency order. The quantity at which the item should be placed on a an order when using a Min/Max order method. The quantity the order should put the stock level at when using the Min/Max order method. (Order quantity = Max Quantity - Stock Level) The amount of stock that should remain in inventory at the lowest point of the planning cycle to cover variances is usage and supplier lead time. The number of days that should be covered for normal usage by the safety stock. Economic Order Quantity. This determines the optimum order quantity based on a set cost of production, demand rate and other variables. The lead time needed for a component item to be able to produce the end item on the required date. Hence requirement date of the consumed item is requirement date of the output item MINUS lead time offset. This is the “average�? time between successive sets of orders (in this case I am assuming purchase orders) Transport lead time duration Lead time required to allow time for inspection of the items prior to their availability The horizon period for planning or ordering purposes. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Contains the set of information about a Supplier Party necessary to execute and administer orders or requests. Is the storage facility for inventory. ### Not supported. Use WorkCenterReference instead of this element. Used to identify a location where production occurs. Specifies the related work center Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. The location of a thing, as captured by an address (or addresses), GPS Coordinates, and/or in relation to other locations. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Identifies the sales contact and sales department/organization that is responsible for the sale that the instance is associated. Identifies the contact information of the person, organization, department, or group that is to shipping the contents communicated by the document or line. Identifies the contact information of the person, organization, department, or group that is responsible for customer service. Identifies the Name of the Location Address for the given location Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. ### Not supported : The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. ### Not supported : The building or house name on the street that identifies the location. ### Not supported : The street name of the building or house that identifies the location. ### Not supported :The unit of the building or house that identifies the location. ### Not supported : The floor of the building or house that identifies the location. ### Not supported : The post office box that is used for the location. The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The sequence number of an address. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Sales Contact. Methods of establishing communication with the Sales Contact. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the Shipping Contact. Mehods of establishing communication with the Shipping Contact. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Name of the CS Contact. Methods of establishsing communication with the CS Contact. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type of Warehouse Location that is being used. This always refers to a Location BOD. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Used to identify the type of location where the production will occur. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ListID for the code that it is associated with. Planning Methods The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. the duration of time for looking ahead in terms of planning for procurement only It refers to the time UOM for the horizon duration like weeks, months, years etc. Contains the set of information about a Supplier Party necessary to execute and administer orders or requests. Number for the Engineering Drawing Country of Origin information including a country code and a percentage. A code defined for a specific industry that indicates the countries of origin and amounts in a single code. Profile of the shipping schedule Tolerance in terms of Quality plus percent (overages allowed) Tolerance in terms of Quality minus percent (underages allowed) Tolerance is the number of days past the expected receipt date that receiving is allowed Tolerance is the number of days prior to the expected receipt date that receiving is allowed Tolerance in terms of Price plus percent Make of the Item Make of the Model Inspect on Receipt Indicator Receipt of the required Indicator Safety Lead Time Purchase lead time for adjustment duration Review of lead time duration Ship via code preapproved item code OEM Product Number specific gravity of the item Alternate item Code used to define the profile of this item for planning purposes. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifier for Standard Carrier Alpha Code . Country in which the Address exists. The list of values is specified in ISO 3166-2. The percentage of the item that comes from the specific country This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note description by which each customer or supplier knows this item Identifies the type of party: Customer, Supplier, or Manufacturer. ID of Party Accounting entity of Party This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Related to Item Planning Level The level in the planning item hierarchy at which the planning runs. Represented as integers starting from 1. Highest level in the hierarchy has level 1. Time period during which the item’s supply plan is frozen, including a unit code for time. For example 2 days. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Identifies the component (or item) that is used to replace the associated item at a given effective date. The date this supercession took effect. Used to prevent circular supercessions. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Used to define a component as an engineering product. Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note description by which each customer or supplier knows this item Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Identifies if a partial shipment is allowed. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. Valid values for the Item are Customer, Supplier, Manufacturer, SKU, and Duplicate. The ID of the entity that created the ID. When the schemeName is ""Customer"" or ""Supplier"" then this value is the ID of the customer or supplier. The name of the entity that created the ID. This is only used when the ID is defined externally and there is no ID for that agency - like for government agencies. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is the primary document id for the document associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Holds information associated with the component that is involved in the substitution. Identifies the date/time that the substitution is effective. Identifies the date/time that the substitution ends. The priority level that is associated with the substitution. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Used to define a component as an engineering product. Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note description by which each customer or supplier knows this item Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Identifies if a partial shipment is allowed. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. Valid values for the Item are Customer, Supplier, Manufacturer, SKU, and Duplicate. The ID of the entity that created the ID. When the schemeName is ""Customer"" or ""Supplier"" then this value is the ID of the customer or supplier. The name of the entity that created the ID. This is only used when the ID is defined externally and there is no ID for that agency - like for government agencies. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note description by which each customer or supplier knows this item An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. Valid values for the Item are Customer, Supplier, Manufacturer, SKU, and Duplicate. The ID of the entity that created the ID. When the schemeName is ""Customer"" or ""Supplier"" then this value is the ID of the customer or supplier. The name of the entity that created the ID. This is only used when the ID is defined externally and there is no ID for that agency - like for government agencies. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Used to define a component as an engineering product. Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note description by which each customer or supplier knows this item The quantity of this component that is requred to make a single instance of the kit item. Identifies if a partial shipment is allowed. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Identifies if the Item is a Service. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note description by which each customer or supplier knows this item A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Identifies the specification of an entity. Indicates whether the ItemQuantity is a fixed size and does not scale along with the quantity of the BOM or Routing being produced Is the maximum number of items that can be put into a lot for this Item. Is the minimum number of items that can be put into a lot for this Item, Is used with the MinimumLotSize and MaximumLotSize. It contains the multiplier between the minimum and maximum manufactured lot quantities. For example, if the maximum lot quantity is 10,000 and the minimum lot quantity is 1000, the lot size multiplier could be 1000. This means the Item may be manufactured in lot sizes starting at 1000 and going up to 10,000 by 1000 increments.For example, 1000, 2000, 3000, etc. A lot of 4500, would not be allowed under these constraints. The lead time needed for a component item to be able to produce the end item on the required date. Hence requirement date of the consumed item is requirement date of the output item MINUS lead time offset. Indicates the state of the item. These values come from ItemStatus code list. Identifies the packaging that the company generally references the Item in. provides a list of codes that identifies the capabilities and features of the associated object Multiple instances may be used. This is a reference amount and the amount used by PLM for formula optimization. A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. The Attachment represents binary data files that may be included within a BOD. These files replace the paper specifications and drawings attached to a BOD definition to clearly communicate design requirements. This Data Type is optional. Attachment usage is further defined by its position. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Shelf life is the length of time that food, drink, medicine, chemicals, and many other perishable items are given before they are considered unsuitable for sale, use, or consumption. duration represents a duration of time. The ·value space· of duration is a six-dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second components defined in § 5.5.3.2 of [ISO 8601], respectively. These components are ordered in their significance by their order of appearance i.e. as year, month, day, hour, minute, and second. Is the storage facility for inventory. The default warehouse in which the item is stored. Worldwide regulations to limit the use of hazardous chemical substances in electronic equipment preventing environmental pollution. To record technical information about the product structure or to carry out cost-price calculations. Used to indicate if an item is sellable. Indicated that this item can be produced. Indicates that this item may be purchased. Indicates that this item may be stored in a warehouse. Holds procurement information associated with the item. Container for Item information that may vary by supplier. In some scenarios, negative stock can be allowed during planning. This flag indicates if negative stock is allowed for this location during planning. Cost of having this item in stock for a period time. For example 5 EUR per month Time interval between the arrival of the item to a location and the availability of that item in stock Time interval between taking the item from stock and departure of that item from the warehouse (shipment). If only one vendor for a raw material and one warehouse in same city while another warehouse on another continent, the lead time to each warehouse will be very different. Identifies the contact information for the buying person, organization, department, or group on the associated document or line. Identifies the contact information of the person, organization, department, or group that planned for the timing of the exchange of goods/services that this document is associated at the document or line level. The data and time (optional) when this object was created. Reference to a Person Noun Is the Lot and Serial numbers for the items contained in the associated component by identifing the number of items and the uniques serial number of those items that belong to a given Lot. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Identifies the type associated with this group of classifications. Element for the communication of all codes. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The identifier for a specification. This does not point to another noun and does not use the accounting entity, location or lid attributes. Represents the Properties or Features of the associated entity A code used to indicate if this specification is used to define a minimum, maximum, or target value. An indicator used to identify Specifications that are likely not of interest to an ERP system. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Element for the communication of all codes. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions date and time this document becomes effective Identifies the reason for an activity Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Is the methodology by which the value of an item is determined. Values are:Standard, Replacement or Budget. Indicates the time period in which the associated component is effective. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note The monetary value of the object in which the amount is associated Monetary amount used for consolidation at accounting entity level. Monetary amount used for consolidation at tenant level. Indicates the PerQuantity side of this Amount. Typically, this value is 1 with a uom of each, meaning that, e.g., a UnitPrice with the Amount 1.29 would be the price per each or simply $1.29 each. For pricing wire, the UnitPrice Amount might be $7.00 with a PerQuantity of 100 and a uom of LinearFeet, meaning the unit price would be $7 per 100 linear feet. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the current state of the associated object. True if this supply source has been approved. False if it is only in planning. Used for determining the sequence in which the sources are used. The percentage of this item to be procured from this source. When true the associated procurement parameters define the default procurement method. E.g. economic order quantity, fixed order quantity, min/max, etc. Indicates the time period in which the associated component is effective. The quantity by which an order quantity can be increased. The quantity that may be ordered when the quantity for an order is fixed. The quantity that may be ordered when the quantity for an order is fixed. The smallest quantity that may be ordered of this item. The smallest quantity of this item that may be ordered as stated in the base UOM for this item. The maximum quantity of this item that may be ordered. The maximum quantity of this item that may be ordered as stated in the base UOM for this item. The amount of stock that should remain in inventory at the lowest point of the planning cycle to cover variances is usage and supplier lead time. Economic Order Quantity. This determines the optimum order quantity based on a set cost of production, demand rate and other variables. The lead time needed for a component item to be able to produce the end item on the required date. Hence requirement date of the consumed item is requirement date of the output item MINUS lead time offset. Transport lead time duration Lead time required to allow time for inspection of the items prior to their availability Contains the set of information about a Supplier Party necessary to execute and administer orders or requests. Is the storage facility for inventory. ### Not supported. Use WorkCenterReference instead of this element. Used to identify a location where production occurs. Specifies the related work center Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. The location of a thing, as captured by an address (or addresses), GPS Coordinates, and/or in relation to other locations. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Identifies the sales contact and sales department/organization that is responsible for the sale that the instance is associated. Identifies the contact information of the person, organization, department, or group that is to shipping the contents communicated by the document or line. Identifies the contact information of the person, organization, department, or group that is responsible for customer service. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The monetary value of the object in which the amount is associated Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Durations element to identify the purpose of that lead time An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Code that identifies the prefered language of the contact. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Code that identifies the prefered language of the contact. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. Identifies the quantity of an item. The quantity of the item in the Base UOM. Identifies the Lot that a given Item Instance belongs to. Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Unique serial number assigned to the given item instance by the manufacturer. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Identifies the method used for selecting the lot for an item. Standard values are ‘Any’, ‘Same’, or ‘Specific’ This element is only used when this lot is a sublot, it has a ParentLotId. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Holds ID information associated with the Item's Lots. Indicates the time period in which the associated component is effective. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Unique serial number assigned to the given item instance by the manufacturer. radio frequency identifier (RFID) Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Represents the identifier of the country of origin of an item, service or shipment Country of Origin information including a country code and a percentage. A code defined for a specific industry that indicates the countries of origin and amounts in a single code. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ListID for the code that it is associated with. Countries Element for the communication of all codes. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions This attribute contains the Code List ListID for the code that it is associated with. Disposition Codes When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Identifies where the note is used and is associated to an Infor defined code list, ''NoteType,'' that indicates the processes that might use the note. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it.