The header information of the inspection order. Typically, an inspection order results in an inspection task for the Quality Management team. Is the primary document id for the document associated. Is the alternate document id for the associated document. The ID for this object formatted as closely as possible to the way the customer would expect to see the ID. This element is used for display only and has no other purpose. The datetime on which the object was last modified. A reference tot he person that took the action that caused this BOD to be published. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Indicates the current state of the associated object. References the PurchaseOrder noun. Points to information associated with the item""s production order. References the SalesOrder noun. The type of inspection order. Extensible code list. Valid values include: Sales, Purchase, Production, BillOfMaterial, Routing, Storage. Contains the set of information about a Supplier Party necessary to execute and administer orders or requests. Identifies the party that the goods or services are being shipped or sent from. Is the organization that is the end customer of the goods or services being provided in the associated transaction. Identifies the ShipToParty for the document or the line. Identifies the Item associated with the Line or Detail of a transaction. The item provides the details of the generic Item component information. Is the storage facility for inventory. Storage date and time of the item. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. The quantity of the item that was accepted upon inspection. The part of the sample quantity accepted after testing in the base unit of measure. The total quantity to be accepted, as recommended by Quality Management. The total of all sample quantities which passed the tests successfully. Quantity of the item that was rejected during inspection. The part of the sample quantity rejected after testing in the base unit of measure. The total quantity to be rejected, as recommended by Quality Management. The total quantity destroyed during a destructive test. The quantity destroyed is equal to the sample size of the inspection tasks that are tested by means of destructive tests. The quantity destroyed does not have any impact on the accepted or rejected quantities. The total quantity destroyed during a destructive test. The quantity destroyed is equal to the sample size of the inspection tasks that are tested by means of destructive tests. The quantity destroyed does not have any impact on the accepted or rejected quantities. Stated in the base unit of measure. The quantity to be destroyed in destructive tests, as recommended by Quality Management. The reason why the samples are destroyed in the destructive tests. A boolean, indicating whether the inspection results are either a mere recommendation for the user (true), or mandatorily to be accepted as such (false). In the first case, the user can ignore and even overwrite the accepted and rejected quantities. The way in which production, purchase, or sales, is stopped or controlled in order to carry out inspections. Extensible code list. Valid values include: Continue, Block, BlockOperation, BlockCompletedOperation. Person who is reponsible for a plan, an action, etc. The person who produced the material. The location where the nonconforming material was found. Such as, a department, work center, area, etc. The material location where the material physically exists. Allows nesting to support multi-level hierarchical location such as "QA Crib 001", "Rack 1", "Shelf 1", "Slot 2", etc. The date and time the inspection is due by. Name value pair to contain information provided by and returned to a trading partner. A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Identifies where the note is used and is associated to an Infor defined code list, ''NoteType,'' that indicates the processes that might use the note. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Is the primary document id for the document associated. Is the identifier of the given Line Component within the document A Facility identifies a location within an entity. The facility may have sub-locators identified using a sequenced identification notation e.g. Warehouse A100 Sub-Location 11, Row R10 would be represented as an array of three Facility elements with values as A100, 11, R10, name attribute as Warehouse, Sub-Location and Row and sequence attribute as 1,2 and 3 respectively. Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. The type attribute is required on all DocumentReference elements and must be a valid noun name. The valid noun names are in the "Noun Name" code list for validation. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Is the primary document id for the document associated. Is the identifier of the given Line Component within the document Is the ScheduleLineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. Is the SublineNumber of a particular item of interest for the given DocumentReference. The Line Number is of the primary DocumentId of the sender indicated by the DocumentId under DocumentIds. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is the primary document id for the document associated. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions References the Operation noun. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. References to Items that have been consumed in manufacturing. References to output items in manufacturing. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Is the identifier of the given Line Component within the document Reference to the schedule of consumed items in manufacturing. Is the identifier of the given Line Component within the document Is the identifier of the given Line Component within the document Reference to the schedule of output items in manufacturing. Is the identifier of the given Line Component within the document Is the primary document id for the document associated. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Is the identifier of the given Line Component within the document This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Is the primary document id for the document associated. Is the alternate document id for the associated document. The date that document was created within the system of record. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. The location of a thing, as captured by an address (or addresses), GPS Coordinates, and/or in relation to other locations. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the creditor. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The name of the entity that created the ID. This is only used when the ID is defined externally and there is no ID for that agency - like for government agencies. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Identifies the Name of the Location Address for the given location From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. ### Not supported : The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. ### Not supported : The building or house name on the street that identifies the location. ### Not supported : The street name of the building or house that identifies the location. ### Not supported :The unit of the building or house that identifies the location. ### Not supported : The floor of the building or house that identifies the location. ### Not supported : The post office box that is used for the location. The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The sequence number of an address. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. The numeric ranking of this element in a collection of like elements where 1 is the preferred option. Indicates that this element is the prefered element in a collection of like elements. Identifies the channel in which the associated entity comes. phone, email, address, skype, ICQ, ... Code identifying the usage of the contact point e.g. business, private, etc. The country dialing code for a communication number. Only a few applications support this value so it may be stored as a prefix on the DialNumber. This is the approach taken by ICB. The area dialing code for a communication number. Area code is specific to the North American dialing pattern. The area code may be included in the dialing number or carried separately. If carried separately in an environment that supports a country code, the country access code must be carried in the CountryDialing element and not stored as a prefix on the DialNumber. The commication number, not including country dialing or area dialing codes. The extension of the assoicated communication number. The text that permits access to the electronic network of the associated communication number such as telephone network, for example 9, *70. A physical address usually including street name, number, city, country and postal code. Can be represented using a more complex format when necessary. Uniform Resource Identifier. Identifies files and locations on the web. This can also be used for email address under contact. Indicates that the associated entity preferrs HTML format. Holds preference information for the instance of the object being referenced. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. Identifies the preferred communication method to use. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Channel Code This attribute contains the Code List ListID for the code that it is associated with. Communication Use Codes Holds the lines that make up the address. ### Not supported : The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. ### Not supported : The building or house name on the street that identifies the location. ### Not supported : The street name of the building or house that identifies the location. ### Not supported :The unit of the building or house that identifies the location. ### Not supported : The floor of the building or house that identifies the location. ### Not supported : The post office box that is used for the location. Identifies the town or the city Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. Country in which the Address exists. The list of values is specified in ISO 3166-2. Postal Code of the Address. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. The sequence number of this address line. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. The location of a thing, as captured by an address (or addresses), GPS Coordinates, and/or in relation to other locations. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Tax Identification Number of the creditor. Identifier for Standard Carrier Alpha Code . Identifier for business provided by Dun and Bradstreet. The Commercial and Government Entity (CAGE) code is a five-character ID number used extensively within the Department of Defense to identify specific companies. DoDAAC (Dept. of Defense Activity Address Code) is a unique six-position, alphanumeric string that uniquely identifies departments, locations, units, and so on within the military. This identifier serves the same purpose as a company The Bank Identifier Code is a unique address which, in telecommunication messages, identifies precisely the financial institutions involved in financial transactions. Identifier of the given location within the scope of the integration Identifies the Name of the Location Address for the given location Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Used to reference a location that is defined for the purposes of tracking transactions against a logistical company. Used to indicate if a location is not a physical internal warehouse, but rather one used for tracking direct shipments. From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. The location of a thing, as captured by an address (or addresses), GPS Coordinates, and/or in relation to other locations. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. The customer party's account id. Identifier of the given location within the scope of the integration Identifies the Name of the Location Directions for the given location Address for the given location From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. The ID of the accounting entity that is associated with this ID. Used with the global ID - no schemeNameAttribute. The sequence number that identifies the number of times that this BOD, for this object, has been published. Used with the global ID- no schemeNameAttribute. The logical ID of the system that is this SOR for this noun instance.. Used with the global ID- no schemeNameAttribute. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Format Code indicates the format of the address. Examples are US Military, US Formatted Address, European Formatted Address etc. There is no intent to decode the address formats - these are informational only. No list of valid values exists or is proposed here. The name of the person to whom this document would be intended. There are multiple methods of expressing an address line in OAGIS. The primary method supported by Infor will be a sequences collection of adderss lines. A more detailed address can be implemented and documented when the need arises. Only that actuall address lines should be included in these lines as the city, country sub-dicision, country and postal code are separate elements that should always be included in an address. ### Not supported : The Number of the building or house on the street that identifies the location. For example, Building 300 on Standards Parkway. ### Not supported : The building or house name on the street that identifies the location. ### Not supported : The street name of the building or house that identifies the location. ### Not supported :The unit of the building or house that identifies the location. ### Not supported : The floor of the building or house that identifies the location. ### Not supported : The post office box that is used for the location. Vanity city name like La Jolla for San Diego The city must be provided for an address. Qualifies the further division of the Country. These may be Districts, Regions, States, Provinces etc. A possible list of values is as specified in ISO 3166-2. CountryCode Postal Code of the Address. Holds preference information for the instance of the object being referenced. The value may be ''text'' or ''discrete''. Text indicates that the Address elements are used and discrete indicates that the ''Street'' and ''Number'' elements are used. This attribute contains the Code List ListID for the code that it is associated with. Address Format Codes An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. Contains the set of possible identifiers for an associated Party. Identifies the Name of the object in which associated. The location of a thing, as captured by an address (or addresses), GPS Coordinates, and/or in relation to other locations. Identifies the means of sending messages, orders, etc., including telephone, email, etc.. Identifier of the given location within the scope of the integration Identifies the Name of the Location Address for the given location From the LocationType code list, an extensible list that includes Warehouse, Manufacturing, Purchasing, Sales, Financial, Others. Is the primary item Identifier associated with the given item within the scope of the given integration as provided by the Party or entity that has created this document instance. UPC ID - This is the UPC-A general purpose code. It has 1 digit for a system number, 5 digits for the manufacturer number, 5 digits for the product number, and one check sum digit. Electronic Product CodeLike the Universal Product Code (UPC) or bar code, the Electronic Product Code(EPC) is the fundamental identifier for a physical object in a EPC Network. The EPC identifies the manufacturer, product, version and serial number, and uses an extra set of digits to identify unique items. The EPC Tag Data Standards Specification Version 1.1 defines the encoding of the Electronic Product Code onto the RFID chip, as well as how it is encoded for use in the information systems layer of the EPC Network (for example the RFID Information Server). GTIN describes a family of GS1 (EAN.UCC) global data structures that employ 14 digits and can be encoded into various types of data carriers. Currently, GTIN is used exclusively within bar codes, but it could also be used in other data carriers such as radio frequency identification (RFID). The GTIN is only a term and does not impact any existing standards, nor does it place any additional requirements on scanning hardware. For North American companies, the UPC is an existing form of the GTIN. Identifies if the Item is a Service. Describes the associated item. description by which each customer or supplier knows this item This identifies the classification of an entity. An entity may be classified into mulitple groups for different reasons. Examples of Classification include Commodity Codes, Freight Classifications, Product Line classifications and so on. Suggested Values are COMMODITY, FREIGHT, PRODUCTLINE. Identifies the specification of an entity. Identifies the Packaging information for a given item. Note: The UPC here is the UPC of the packaging for a given item. radio frequency identifier (RFID) Is the Lot and Serial numbers for the items contained in the associated component by identifing the number of items and the uniques serial number of those items that belong to a given Lot. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise and the value of the ID must, when combined with the accounting entity when present, uniquely identify this item throughout the enterprise. Valid values for the Item are Customer, Supplier, Manufacturer, SKU, and Duplicate. The ID of the entity that created the ID. When the schemeName is ""Customer"" or ""Supplier"" then this value is the ID of the customer or supplier. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Identifies the type of party: Customer, Supplier, or Manufacturer. ID of Party Accounting entity of Party This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The identifier for a specification. This does not point to another noun and does not use the accounting entity, location or lid attributes. Represents the Properties or Features of the associated entity A code used to indicate if this specification is used to define a minimum, maximum, or target value. An indicator used to identify Specifications that are likely not of interest to an ERP system. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Provides the dimensions of the associated component. Identifies the code that is associated with the package level that the UPC is designated to. Is the number of instances of the item in the unit of measure contained with in the package. Is the maximum number of instances of an item in the unit of measure that maybe contained within the package. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Indicates the width of an object Indicates the length of an object Indicates the Height of an object Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Indicates the type of dimension that is associated with the Packaging. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ListID for the code that it is associated with. UPC Packing Levels The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. Is used to describe the quantity of an item. The quantity of the item in the Base UOM. Identifies the Lot that a given Item Instance belongs to. Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Unique serial number assigned to the given item instance by the manufacturer. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Identifies the method used for selecting the lot for an item. Standard values are ‘Any’, ‘Same’, or ‘Specific’ Quantity of items required to fill the lot. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Holds ID information associated with the Item's Lots. Indicates the time period in which the associated component is effective. Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated. Unique serial number assigned to the given item instance by the manufacturer. radio frequency identifier (RFID) Indicates whether an item is active, inactive, or in other various states. Examples of values for this field include: Active, Inactive, Hold, Deleted, Obsolete Represents the identifier of the country of origin of an item, service or shipment Country of Origin information including a country code and a percentage. A code defined for a specific industry that indicates the countries of origin and amounts in a single code. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ListID for the code that it is associated with. Countries Country in which the Address exists. The list of values is specified in ISO 3166-2. The percentage of the item that comes from the specific country This attribute contains the Code List ListID for the code that it is associated with. Countries This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Element for the communication of all codes. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions This attribute contains the Code List ListID for the code that it is associated with. Disposition Codes When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ListID for the code that it is associated with. Reject Reasons This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Element that contains name value pairs. It also includes a data type, unit of measure code, and currencyID Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Indicates the time period in which the associated component is effective. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. A collection of codes with a sequence added to the codes for ordering. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions Identifies the type associated with this group of classifications. Element for the communication of all codes. The sequence attribute is used for the ordering of elements within a document. It is not intended to be used as an identifier. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Is the identifier of the given Line Component within the document Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Indicates the current state of the associated object. The data and time (optional) when this object was created. Financial calendar reference for the start of this notice. Financial calendar reference for the completion of this process. Refers to a user definable standard test procedure. Standard code list. The version number of the standard test procedure. Defines how often samples to test an order quantity are taken, and what the sample size is. User definable standard code list. Summary of the test result. Extensible code list. Valid values include: Accepted, PartiallyAccepted, Rejected, Undefined. In case of a re-inspection, this is a cross-reference, from the re-inspection task, to the original inspection task, as published with the same inspection order. In case of a re-inspection, this is a cross-reference, from the original inspection task, to the re-inspection task, as published with the same inspection order. Reference to QualitySpecification for the task Specification of the way in which the samples are taken from the order quantity. Extensible code list. Valid values include: HundredPercent, SingleSampling, ContinuousSampling, SamplingRule. Used to define the frequency for testing, either by time or quantity. The sample size, expressed as a percentage of either the order quantity or the frequency (in case of ContinuousSampling as the test type). Specifies a part of the sample quantity that would be tested per iteration. Example: A 5 kg sample will be tested by testing 1 kg at a time. When test quantity is less than sample size, there would be multiple iterations of testing so that the entire sample is tested. The part of the sample quantity that is tested. Example: A 5 kg sample will be tested by testing 1 kg at a time. Stated in the base unit of measure. Specifies the sample size The minimum percentage of a test sample that must be approved to have the entire item quantity approved. The sampling rule for the inspection task. User definable standard code list. The sampling plan ID for the inspection task. The inspection standard defined for the inspection task. User definable standard code list. The severity level defined for the inspection. Extensible code list. Valid values include: Reduced, Normal, Tightened. The iterations performed for the sampling plan. Iteration number The inspection level at which the inspection must be conducted. User definable standard code list. Boolean. If true, only a part of the lot is to be inspected. The quantity of the item that was accepted upon inspection. The part of the sample quantity accepted after testing in the base unit of measure. Quantity of the item that was rejected during inspection. The part of the sample quantity rejected after testing in the base unit of measure. An inspection task may consist of multiple inspection task lines. In an inspection task line, the inspection setup by item part and characteristic is defined. Name value pair to contain information provided by and returned to a trading partner. A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Reference to the FinancialCalendar noun. The number of a period in a year, either fiscal or calendar. A calendar year Is the primary document id for the document associated. Identifies the Name of the object in which associated. The ID of a Financial Calendar as defined by the FinancialCalendar noun. Identifies the engineering change revision that this entity addresses. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. Reference to the FinancialCalendar noun. The number of a period in a year, either fiscal or calendar. A calendar year This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unique ID for this QualitySpecification within an accounting entity. Identifies the Name of the object in which associated. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The number of times this object has been published with these attributes for the accounting entity and location. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Is the identifier of the given Line Component within the document Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note A generic reference that uses the ""type"" attribute which contains the noun name of the referenced object. Indicates the current state of the associated object. The data and time (optional) when this object was created. A part of an item. For example, a bolt can have the aspects head and tail. An aspect can have one or more characteristics. For example, a head can have a diameter and a length, and a tail can have a diameter and a color. User definable code list. A code that indicates a particular quality or distinctive mark of an item or an item part/component. For example, diameter, length, weight. User definable code list. The type of value that is measured. Extensible code list. Valid values include: Fraction, Integer, Option. The UOM in which the item characteristic is expressed. The standard type of the characteristic. Extensible code list. Valid values include: Attribute, Variable, Text. Category for the characteristic. User definable code list. QualityTest master associated with this task line An examination or check done on a characteristic. User definable code list. Location where the quality tests occur Specifies the related work center. To be used when the inspection is done in a work center; in all other cases TestLocation must be used Summary of the test result. Extensible code list. Valid values include: Accepted, PartiallyAccepted, Rejected, Undefined. The quantity of the item that was accepted upon inspection. The part of the sample quantity accepted after testing in the base unit of measure. Quantity of the item that was rejected during inspection. The part of the sample quantity rejected after testing in the base unit of measure. The reason why the hold quantity was put on hold (reported as nonconformant). Typically this would be for outbound information. When true the sample is destroyed by the test. Code defining the test type The UOM that applies to the test. The name of the standard used by the industry for this test. The specific know-how or technical expertise that an engineer must have to carry out activities. Uses user definable code list Skills. Tester who performed the quality control tests An item characteristic value that is determined once. The standard normally used for characteristics. For example, a DIN standard. The desired quality for the item characteristic, expressed in the characteristic UOM. The lowest characteristic value, expressed in the characteristic UOM, for which the quality is acceptable. The highest characteristic value, expressed in the characteristic UOM, for which the quality is acceptable. The highest characteristic value, in between the lower limit and the norm value, that results in a quality warning. The lowest characteristic value, in between the norm value and the upper limit, that results in a quality warning. Name value pair to contain information provided by and returned to a trading partner. A container for a collection of codes that should be associated with the containing object that can be used to group or refine the definition of the object. Allows the user of OAGIS to extend the specification in order to provide additional information that is not captured in OAGIS. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. Reference to the FinancialCalendar noun. The number of a period in a year, either fiscal or calendar. A calendar year Reference to the FinancialCalendar noun. The number of a period in a year, either fiscal or calendar. A calendar year A container that holds a list of IDs without RevisionID. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Identifies the Name of the object in which associated. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the current state of the associated object. Code used to define the status of this document. See the code list associated to this code for the list of valid codes and their meanings. date and time this document becomes effective Identifies the reason for an activity Indicator that determines if the BOD has been archived. The default value is false so there is no need to explicitly set this to false. This attribute contains the Code List ID for the codes that are associated with corresponding entity. An identifier for an object. The ID has a number of possible attributes to further define how it should be used.. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The LID of the system where the object can be maintained. This can be used by BIS to help automate the drill back process. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. This attribute contains the Code List ID for the codes that are associated with corresponding entity. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. Element for the communication of all codes. Identifies the Name of the object in which associated. This attribute contains the Code List ID for the codes that are associated with corresponding entity. The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. The location that is associated with the maintenance of this instance of the noun. This attribute must not be included on the ID of objects that are maintained at the tenant or accounting entity level. A container that holds a list of IDs without RevisionID. Identifies the Name of the object in which associated. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. Is the tag and information of the new information to be passed. Free form text that describes the object and repeats as needed to provide support for multilingual descriptions A freeform note Indicates the time period in which the associated component is effective. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Workflow Properties This is the identifier for this Property within this document. Identifies the data type of the value of this property. The unit-of-measure (UOM) code associated with a quantity. This is based upon the ISO standard. The code for the currency associated with an amount. This attribute contains the Code List ID for the codes that are associated with corresponding entity. Dimension The accounting entity that is associated with the maintenance of this instance of the noun. For objects that are maintained at the tenant level this attribute must not be included in the document. When no schemeName exists this is the default ID for the enterprise at the level where this object is maintained. The value of the ID must uniquely identify this object throughout the enterprise within the scope of the level where it is maintained (tenant, accounting entity or location). The specific values for this attribute are determined by the individual noun. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. An optional identifier, that when used can uniquely identify each instance of a note within a BOD. It is only unique within the context of the document. Indicates if the note should be published externally or if it is for internal use only. It may have the values ''Internal'' and ''External''. Person who created the note Entry date and time in GMT. Status of a note. Identifies where the note is used and is associated to an Infor defined code list, ''NoteType,'' that indicates the processes that might use the note. This is required for language codes other than ""en-us"" when the element that includes this attribute is used. The timestamp marking the beginning of a time period during which a related entity or status is effective or applicable. Indicates the duration of time as represented by ISO 8601. Where the value space is a six dimensional space where the coordinates designate the Gregorian year, month, day, hour, minute, and second. The number of seconds can include decimal digits to arbitary pecision. This can be used in place of the EndDateTime, but not in conjunction with it. Is the ending timestamp of the event. This can be used in place of the Duration, but not with it.