Is the finished good en item. In the case that the Item is raw material or sub-compoenent. This identifies the finished good that it is for. For example in case of Manufacturing an airplane and the compenents used must be tracked. Idicates if the Item is reported theoretically (back-flushed) or if the ITEM is reported directly (actual) Is the manufacturing view of an Item where the complete detail of an Item is represented by the MasterItem. Group of Operation elements that occur together in the Operation and QualifiedResource. This reference is no longer used This reference is no longer used Is used to indicate how the rates are specified. Is the.methodology by which the value of an item is determined. Values are: Standard Moving Average LIFO - last in first out. FIFO - first in first out. Identifies the type of container used to place the items that result from the operation. Indicates the department in which the operation is performed. Is a process code used for grouping like operations. Possible examples are: Heat Treat, Dyeing Indicates whether the machine can be setup for the operation early or whether setup must happen at a specific time depending upon conditions. Possible values: - Early - NotDelayed - DelayedByPredicessor - DelayedByMaterial Identifies the Location that the work is done. Indicates whether the operation should be tracked. Indicates whether the operation should be tracked. Information specific to the steps specified to perform the operation. Information that describes the resources to perform the specified resource usage for the operation and/or the step that is defined by the preceding Operation or Step. Represents the secondary packing code used to further identify the package of the product. Hmmm, where is the primary packing code? Exception detail for Detail or Lline information. Identifies the previously received plan schedule that this new schedule is responding to as a reference. The typical scenario is a supplier uses a Sync PlanningSchedule or Sync ShipmentSchedule to respond to a customer demand schedule, and this will identify the customer demand schedule that this supplier previously received. The date and time is also used in identifying the previously received plan schedule that the new plan schedule is responding to. Note that the combination of document id, document date, and revision number can uniquely identify a plan schedule. DateType indicates whether the dates specified on the schedule are delivery based or shipment based. Dates specified on the schedule include FromDateTime and ToDateTime at Header and Line levels. ScheduleType indicates whether the PlanningSchedule is a demand schedule from a customer or a supply schedule from a supplier. For the supplier schedule to respond to the original demand schedule, the RespondingScheduleReference is used to identify the customer's original demand schedule that it is responding to. Tool/ID is depricated Tool/ToolID should be used to communicate the Identifier of the Tool. Identifies the Tool. Identifies the Labour needed for a given task. Idenitifies a machine. Identifies the tool needed for a given task. Deprecate Item in favor of ItemInstance in InventoryActual and InventoryAllocation. Item is intended to be the Item concept characteristics of the Item and not intended to represent the Item Instances. ItemInstance was created to be the instances of the Items. This identifies resources that are required to perform the maintenance operation. Resource Requirements can be specified for the entire maintenance order or for each operation within the order Is the duration value the tool is actually used. Indicates the Work-In-Process Operation in which the items are being moved from. Indicates the Work-In-Process Operation in which the items are being moved to. This Data Type is used to communicate a flexible bucket definition. The value of Identifier can be taken from predefined values such as Day, Week, etc. or it can hold a user defined identifier with a specific time period. In any case the actual time period and Identifier must be used. All time bucket definitions used within the schedule. The location of a The PLM system or engineer (we were working with a tomato soup example) creates the bill of resources. This is basically a recipe that identifies the materials used and the steps involved in creating the desired output. A Planner will take that BillOfResources and assign it to a production facility (line) and that will create a ProductionOrder that is open - not yet in production. The production supervisor will review the order and then release it to production. The operator will update the order as they complete steps. Information specifying the previous operation. This provides the immediate preceding operation of the current operation defined in RouteOperation. The RouteOperation of the operations of the potential first operations will not have an associated PreviousOperation, however all others must contain one. Identifies the meter that was measured Is the measurement value of the service operation. Is the timestamp in which the measurement was recorded. Indicates EDI delivery instruction details for the corresponding items in the schedule Indicates the EDI delivery instruction number